because long URLs do not induce extra height despite wrapping by dialog(1).
NOTE: For even longer lines, the cursor up/down keys work to scroll through
Add support for installation directly via HTTP.
While we're here, remove the menu-item for Passive FTP (since moving to
ftp(1) and switching FTPMODE to `auto' by default -- see r251613 -- the
single remaining FTP menu-item works for both ftp.f.o and ftp-archive.f.o;
previously each requiring separately active versus passive both work with
the `auto' setting). In scripting you still have mediaSetFTPActive and
mediaSetFTPPassive but the remaining FTP menu-item uses mediaSetFTP which
defaults to `auto' (aforementioned SVN r251613).
In line to what is done in UFS, define an internal type
e2fs_lbn_t for the logical block numbers.
This change is basically a no-op as the new type is unchanged
(int32_t) but it may be useful as bumping this may be required
for ext4fs.
Also, as pointed out by Bruce Evans:
-Use daddr_t for daddr in ext2_bmaparray(). This seems to
improve reliability with the reallocblks option.
- Add a cast to the fsbtodb() macro as in UFS.
Reviewed by: bde
MFC after: 3 days
exists on the FTP server. This now means that when you specify a full-path
to the repository on the FTP server that it doesn't matter whether you have
a trailing `/' or not.
file's size attribute does not get updated. As such, it is necessary
to invalidate the attribute cache before clearing NMODIFIED for pNFS.
MFC after: 2 weeks
enable use of the (no)resvport mount option for NFSv4. I had thought
that the RFC required that non-reserved port #s be allowed, but I couldn't
find it in the RFC.
MFC after: 2 weeks
same as top-level target name for "device runfw" kernel option and
caused cyclic dependancy that lead to kernel build breakage
Module change is not strictly required and done for name unification sake
PR: conf/175751
Submitted by: Issei <i10a at herbmint.jp>
requests reload or restart, which, in addition of testing the
configuration, will also generate host keys when they are not
present (previous behavior).
Obtained from: FreeNAS
Ok'ed by: bdrewery, des
MFC after: 1 week
increased the pointer, not the memory it points to.
In collaboration with: kib
Reported & tested by: Ian FREISLICH <ianf clue.co.za>
Sponsored by: Nginx, Inc.
- Be more explicit about zone vs keg locking. This functionally changes
almost nothing.
- Add a size parameter to uma_zcache_create() so we can size the buckets.
- Pass the zone to bucket_alloc() so it can modify allocation flags
as appropriate.
- Fix a bug in zone_alloc_bucket() where I missed an address of operator
in a failure case. (Found by pho)
Sponsored by: EMC / Isilon Storage Division
Make PrologEpilogInserter save/restore all callee saved registers in
functions which call __builtin_unwind_init()
__builtin_unwind_init() is an undocumented gcc intrinsic which has
this effect, and is used in libgcc_eh.
Goes part of the way toward fixing PR8541.
This obsoletes the ugly hack to libgcc's unwind code from r245272, and
should also work for other arches, so revert the hack too.
specified, only md(4) devices which have the specified file as backing
store are displayed.
- Use MD_NAME instead of "md".
- Use _PATH_DEV instead of "/dev/".
MFC after: 1 week
while-loop _and_ all prior matches in the same case-statement either break
or continue, we can safely break the fall-back out of the case-statement.
This should improve readability and allow for longer-lines by reducing the
level of indentation by-one for the fall-back case.
(a continuation of SVN r252019)
while-loop _and_ all prior matches in the same case-statement either break
or continue, we can safely break the fall-back out of the case-statement.
This should improve readability and allow for longer-lines by reducing the
level of indentation by-one for the fall-back case.
This is an extended version of ipv4_addr_IF which supports both IPv4 and
IPv6, and multiple range specifications. To avoid to generate too many
addresses, the maximum number of the generated addresses is currently
limited to 31.
- Add $ifconfig_IF_aliases, which accepts multiple IP aliases in a variable.
- ipv6_prefix_IF now supports !/64 prefix length. In addition to the old
64-bit format (2001:db8:1:1), a full 128-bit format like 2001:db8:1:1::/64
is supported.
- Replace ifconfig command with $IFCONFIG_CMD variable to support
a dry-run mode in the future.
- Remove IP aliases before removing all of IPv4 addresses when doing
"rc.d/netif down".
- Add a DAD wait to network6_getladdr() because it is possible to fail to
configure an EUI64 address when ipv6_prefix_IF is specified.
A summary of the supported ifconfig_* variables is as follows:
# IPv4 configuration.
ifconfig_em0="inet 192.168.0.1"
# IPv6 configuration.
ifconfig_em0_ipv6="inet6 2001:db8::1/64"
# IPv4 address range spec. Now deprecated.
ipv4_addr_em0="10.2.1.1-10"
# IPv6 alias.
ifconfig_em0_alias0="inet6 2001:db8:5::1 prefixlen 70"
# IPv4 alias.
ifconfig_em0_alias1="inet 10.2.2.1/24"
# IPv4 alias with range spec w/o AF keyword (backward compat).
ifconfig_em0_alias2="10.3.1.1-10/32"
# IPv6 alias with range spec.
ifconfig_em0_alias3="inet6 2001:db8:20-2f::1/64"
# ifconfig_IF_aliases is just like ifconfig_IF_aliasN.
ifconfig_em0_aliases="inet 10.3.3.201-204/24 inet6 2001:db8:210-213::1/64 inet 10.1.1.1/24"
# IPv6 alias (backward compat)
ipv6_ifconfig_em0_alias0="inet6 2001:db8:f::1/64"
# IPv6 alias w/o AF keyword (backward compat)
ipv6_ifconfig_em0_alias1="2001:db8:f:1::1/64"
# IPv6 prefix.
ipv6_prefix_em0="2001:db8::/64"
Tested by: Kimmo Paasiala
