cg
46fe534232
modules for the new sb8 and sb16 drivers
2000-10-28 19:28:49 +00:00
cg
d8ad9a1bc1
add commented-out entries for the new sb8 and sb16 drivers
2000-10-28 19:24:14 +00:00
cg
ceaa4e2ae6
split up sb16 and sb/sbpro drivers
...
we do not support sb versions <2.00, and the sb8 driver has not been tested
yet.
these drivers are not yet enabled by default.
2000-10-28 19:20:03 +00:00
mpp
b48dc4a4e8
Style & grammar fixes.
...
PR: docs/22374, docs/13020
2000-10-28 18:37:37 +00:00
ume
6a944e364b
some clarification on if_getmtu()
...
- avoid to use freed (by freeifaddrs) data
- 1st try getifaddrs, then try SIOCGIFMTU as the last resort
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
Obtained from: KAME Project
2000-10-28 17:57:38 +00:00
ume
19ead08f69
defined HAVE_IFM_DATA for (free|net|open)bsd
...
Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>
Obtained from: KAME Project
2000-10-28 17:54:19 +00:00
joe
cc8a57c9b9
When an interface isn't specified use wi0 as the default.
...
This gets around a segmentation fault that occurs when the interface
isn't specified first before any of the options.
Inspired by PR: bin/22241
2000-10-28 16:25:25 +00:00
joe
af22c2e96e
When an interface isn't specified use wi0 as the default.
...
This gets around a segmentation fault that occurs when the interface
isn't specified first before any of the options.
Inspired by PR: bin/22241
2000-10-28 16:18:41 +00:00
joe
3d348198c8
Fix a blatant bug when running '/etc/pccard_ether device stop'.
...
I wasn't dropping the interface correctly, but not noticing because
the interface was going away when the card was ejected.
Submitted by: Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
2000-10-28 14:31:40 +00:00
gallatin
5f9ff12cb1
cleanups of my previous, quick & dirty fix of unaligned access errors on alpha.
...
submitted by: bde
2000-10-28 14:26:23 +00:00
sanpei
9c17a07343
add PC-Card melody beep(PC Card bus, kludge version)
...
Original idea from: PAO3
2000-10-28 13:35:34 +00:00
msmith
d456c791d3
Mention the new '40LD' AMI RAID controllers that we now support.
2000-10-28 11:51:12 +00:00
nyan
3d97ada87f
Restore GDC mode to initial mode instead of 24KHz.
...
Submitted by: Tomokazu HARADA <tkhara@osk4.3web.ne.jp>
2000-10-28 11:27:56 +00:00
nyan
965741e3e3
Fixed extention memory check routine.
...
Submitted by: chi@bd.mbn.or.jp (Chiharu Shibata)
2000-10-28 11:16:42 +00:00
nyan
18652ae093
Removed extra calculation for X position (PC-98 only).
...
Submitted by: chi@bd.mbn.or.jp (Chiharu Shibata)
2000-10-28 10:59:21 +00:00
msmith
6f69682320
Return -10 from the PCI probe to allow room for an updated driver to
...
override one built into the kernel.
2000-10-28 10:46:30 +00:00
peter
f86db637cd
Fix typo s/DE_DEVICEID_FE2500/DC_DEVICEID_FE2500/
2000-10-28 10:03:54 +00:00
alex
134482b1a7
Use EX_USAGE in an example, as the SAME manual page describes a
...
few lines higher.
PR: 22371
Submitted by: andrew@ugh.net.au
2000-10-28 10:02:23 +00:00
asmodai
caa5a9eec6
Add some more information to the AUTHORS section.
...
Remove unnecessary duplication of asr after the .Nm macro.
2000-10-28 09:56:34 +00:00
wpaul
a5f3fd7958
Add PCI IDs for some additional cardbus cards. Yes, there really is
...
a RealTek 8139 cardbus device. Unfortunately it doesn't quite work yet
because the CIS parser barfs on it.
Submitted by msmith, with some small tweaks by me.
2000-10-28 09:00:20 +00:00
msmith
2e093a62cd
We should include <machine/stdarg.h> not <stdarg.h>
...
Submitted by: phk
2000-10-28 08:32:43 +00:00
bde
c47f1bfac0
Quick fix for namespace problems which broke many ports. Spell
...
uint16_t as "unsigned short" like it used to be and uint32_t as
"unsigned int" not like it used to be (was: "unsigned long").
2000-10-28 08:20:33 +00:00
alex
a09af49602
Make the -d option actually work.
...
Today fast terminals are usually the default.
PR: 21634
Submitted by: Eric S. Van Gyzen <eric@vangyzen.net>
2000-10-28 07:37:57 +00:00
msmith
430258152b
Some AML code assumes that a function without an explicit ReturnOp will
...
return the last value returned by a nested method call. This violates
the ACPI spec, but is implemented by the Microsoft interpreter, and thus
vendors can (and do) get away with it.
Intel's stance is that this is illegal and should not be supported.
As they put it, however, we have to live in the real world. So go ahead
and implement it.
Submitted by: Mitsaru IWASAKI <iwasaki@jp.freebsd.org>
2000-10-28 07:32:13 +00:00
msmith
e170b01108
FreeBSD-specific customisations:
...
- Set debugger options for kernel build
- Define some missing functions
- Bring in GCC defines
- Disable the 'wbinvd' macro as it conflicts with our inline
2000-10-28 07:29:08 +00:00
msmith
37860cc264
Add some extra fuctions:
...
- AcpiGetProcessorID (fetch the ACPI processor ID for a given ACPI_HANDLE)
- AcpiSetSystemSleepState (set the Sx sleeping state, proposed by Intel
but not actually implemented)
2000-10-28 07:26:48 +00:00
msmith
b31d4f9996
Add some verbiage about the new ACPICA code. Note that this probably
...
breaks building this config, as the old ACPI code will conflict. The
old code will be going away shortly, so this should not be an issue.
2000-10-28 07:07:02 +00:00
msmith
5dd41ba26a
Allow PCI busses to be connected to host bridges detected by ACPI as well.
2000-10-28 07:04:07 +00:00
msmith
de46dd5596
Connect the new ACPICA code to the 'acpica' device.
2000-10-28 07:03:39 +00:00
msmith
a69e8faa90
Initial FreeBSD OSPM (operating system power management) modules for
...
ACPICA. Most of these are still works in progress. Support exists for:
- Fixed feature and control method power, lid and sleep buttons.
- Detection of ISA PnP devices using ACPI namespace.
- Detection of PCI root busses using ACPI namespace.
- CPU throttling and sleep states (incomplete)
- Thermal monitoring and cooling control (incomplete)
- Interface to platform embedded controllers (mostly complete)
- ACPI timer (incomplete)
- Simple userland control of sleep states.
- Shutdown and poweroff.
2000-10-28 06:59:48 +00:00
msmith
64e150eaa4
FreeBSD-specific OSD (operating system dependant) modules for the Intel
...
ACPICA code.
2000-10-28 06:56:15 +00:00
phk
2e92b95197
Revert two experimental changes which escaped from my devel machine.
2000-10-28 06:55:12 +00:00
msmith
25edde61bd
This commit was generated by cvs2svn to compensate for changes in r67754,
...
which included commits to RCS files with non-trunk default branches.
2000-10-28 05:01:06 +00:00
msmith
748be15501
Initial import of the Intel-maintained ACPI Component Architecture. This
...
is Intel's reference implementation of the core operating-system ACPI
support. (This import is on the vendor branch.)
2000-10-28 05:01:06 +00:00
obrien
9c3bb2995c
Hook ipfilter back up as it compiles now.
2000-10-28 04:51:47 +00:00
ken
5f139e8f9d
Add a quirk entry for Nakamichi MJ-* changers. The changer in question is
...
a <NAKAMICH MJ-5.16S 1.06>.
Submitted by: Kevin Van Maren <vanmaren@fast.cs.utah.edu>
2000-10-28 03:14:59 +00:00
sanpei
989f651b59
add Xircom CreditCard adapters and workalikes(xe driver)
...
to Default (GENERIC) Configuration
2000-10-28 01:35:21 +00:00
jhb
94e76ebf96
The x86 atomic operations are already locked, so they do not need an
...
additional locked instruction to guarantee a write barrier for the acquire
variants.
Approved by: dfr
Pointy hat to: jhb
2000-10-28 00:28:15 +00:00
msmith
25d887ad27
Fix typo in the 4.x case.
2000-10-27 23:40:45 +00:00
cg
53904fdeb6
implement SNDCTL_DSP_POST
2000-10-27 22:20:45 +00:00
jhb
a6921bdf2e
Fix a couple of whitespace nits.
2000-10-27 21:45:50 +00:00
phk
16690ed6af
Remove 86 unneeded #includes
2000-10-27 21:32:10 +00:00
phk
f3419eb077
Remove more unused #includes.
2000-10-27 21:14:25 +00:00
mpp
488d906ef4
Typo fix.
2000-10-27 20:55:15 +00:00
wollman
e5bd9f160d
Initialize rn_mklist in rn_newpair(). The undocumented assumption
...
seems to be that the nodes are bzero'd beforehand, but the submitter
found that this was not always the case, and in any event defensive
programming here costs epsilon squared.
PR: 22244
Submitted by: Dave Gillam <daveg@chiaro.com>
2000-10-27 20:50:14 +00:00
gallatin
9f3c59b4fc
remove a stddef.h missed by phk
2000-10-27 18:57:31 +00:00
nectar
51bb4dd60a
Explicitly initialize _pw_passwd.
2000-10-27 18:27:07 +00:00
mjacob
6a129ddd43
Add usage of M_ZERO to malloc calls where the result was just bzeroed.
...
PR: 22186
Submitted (partially) by: josh@zipperup.org
2000-10-27 16:40:57 +00:00
mjacob
11f3b89daf
Add M_ZERO to malloc calls where the result is just bzeroed.
...
PR: 22188
Submitted (partially) by: josh@zipperup.org
2000-10-27 16:36:26 +00:00
mjacob
1df324d9d7
update man page to reflect new support
2000-10-27 16:12:53 +00:00