sesX device number may change between reboots, so to properly identify
the instance we need more data. Name and ID reported here may mach ones
reported by SCSI device, but that is not really required by specs.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
sizeof(unsigned long) < sizeof(vm_paddr_t) on Book-E, which uses 36-bit
addressing. With this, a CCSR with a physical address above 4GB successfully
maps.
Sponsored by: Alex Perez/Inertial Computing
Since r289279 bufinit() uses mp_ncpus so adapt to what x86 does and
set this variable already in cpu_mp_setmaxid().
While at it, rename cpu_cpuid_prop() to cpu_portid_prop() as well as
the MD cpuid variable to portid to avoid confusion with the MI use
of "cpuid" and make some variable static/global in order to reduce
stack usage.
PR: 204685
the map has been created via bounce_bus_dmamem_alloc(). In that case
bus_dmamap_unload(9) typically isn't called during normal operation
but still should be during detach, cleanup from failed attach etc.
Submitted by: yongari
MFC after: 3 days
Extended memory here is "physical memory above 256MB".
"memsize" in the environment only grows to 256MB; "ememsize" is the entire
memory range. Extended memory shows up at physical address 0x90000000.
This allows for malta64 VMs to be created with > 256MB RAM, all the way
up to 2GB RAM.
Tested:
* qemu-devel package; qemu-system-mips64 -m 2048 (and -m 256 to test the
no-ememsize case.)
TODO:
* testing mips32 with > 256MB RAM.
Reviewed by: imp
At this time I cannot see a way to fix directory caching when it
has partial blocks in the buffer cache, due to the fact that the
syscall's uio_offset won't stay the same as the lblkno * NFS_DIRBLKSIZ
offset.
Reported by: bde
MFC after: 2 weeks
While those tools are not needed anymore they are necessary to build FreeBSD 9
and 10. it does not hurt to keep those tools around until both 9 and 10 branch
become EOLed.
Modify colldef(1) to build after the change in the collation header, and ensure
it does produce the same collation definition it used to generate for 9 and 10
Reported by: Oliver Pinter
Move fdopen() up near other resource allocation like malloc(); do proper
deallocation on failure later on in the function.
Submitted by: Ramachandra Topannavar <rtopannavar@panasas.com>
Reviewed by: jilles
Approved by: jhb (mentor)
MFC after: 2 weeks
Sponsored by: Panasas, Inc.
Differential Revision: https://reviews.freebsd.org/D4126
M lib/libc/gen/popen.c
This was [re-]added in r127458 (apparently with disconnected history as well)
and never connected to the build.
It is no longer relevant for modern systems from the past 20 years.
Discussed with: jhb
Sponsored by: EMC / Isilon Storage Division
All versions of getfsstat(3) are supposed to return the number of [o]statfs
structs in the array that was copied out.
Also fix missing bounds checking and signed comparison of unsigned types.
Submitted by: bde@
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
In case the target of install is a dead symlink, install(1) used to not
consider it as "existing" because of the usage of stat(2) instead of
lstat(2). meaning the old file (the symlink) is not removed before the new
file is created. The symlink is being followed and the new file becoming the
target of the symlink instead of the target of install(1)
Reviewed by: jhb, brooks
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D4191
map has been created via bounce_bus_dmamem_alloc(). Even for coherent
DMA - which bus_dmamem_alloc(9) typically is used for -, calling of
bus_dmamap_sync(9) isn't optional.
PR: 188899 (non-original problem)
MFC after: 3 days
This is only for sys/boot. INTERNALPROG is not a build tool, it is just a way
to generate OBJS from a list of SRCS and use those objects elsewhere.
Sponsored by: EMC / Isilon Storage Division
Lower the payload data (IP) portion of the MTU from 0x10000 to
IP_MAXPACKET (0xFFFF) to avoid panicing the IP stack.
Sponsored by: EMC / Isilon Storage Division
This feature is disabled by default. To enable it, tune
hw.if_ntb.enable_xeon_watchdog to non-zero.
If enabled, writes an unused NTB register every second to demonstrate to
a hardware watchdog that the NTB device is still alive. Most machines
with NTB will not need this -- you know who you are.
Sponsored by: EMC / Isilon Storage Division
This change simplifies and unifies port adding/updating for loop and
fabric scanners. It also fixes problems with scanning restarts due to
concurrent port databases changes. It also fixes many cosmetic issues.
critical section.
uma_zalloc_arg()/uma_zalloc_free() may acquire a sleepable lock on the
zone. The malloc() family of functions may call uma_zalloc_arg() or
uma_zalloc_free().
The malloc(9) man page currently claims that free() will never sleep.
It also implies that the malloc() family of functions will not sleep
when called with M_NOWAIT. However, it is more correct to say that
these functions will not sleep indefinitely. Indeed, they may acquire
a sleepable lock. However, a developer may overlook this restriction
because the WITNESS check that catches attempts to call the malloc()
family of functions within a critical section is inconsistenly
applied.
This change clarifies the language of the malloc(9) man page to clarify
the restriction against calling the malloc() family of functions
while in a critical section or holding a spin lock. It also adds
KASSERTs at appropriate points to make the enforcement of this
restriction more consistent.
PR: 204633
Differential Revision: https://reviews.freebsd.org/D4197
Reviewed by: markj
Approved by: gnn (mentor)
Sponsored by: Juniper Networks
1024 specified on YPMAXRECORD the ypmatch can get in an infinite retry
loop when is requesting the information from the NIS server.
The ypmatch(1) will return an error until the command receives an
kill(1).
To avoid this problem, we check the MAX_RETRIES that is by default set
to 20 and avoid get in infinet loop at the client side.
NOTE: FreeBSD nis(8) server doesn't present this issue.
Submitted by: Ravi Pokala <rpokala@panasas.com>,
Lakshmi N. Sundararajan <lakshmi.n@msystechnologies.com>,
Lewis, Fred <flewis@panasas.com>,
Pushkar Kothavade <pushkar.kothavade@msystechnologies.com>
Approved by: bapt (mentor)
MFC after: 1 month
Differential Revision: D4095
default and add a manual page for mlx5en. The mlx5 module contains
shared code for both infiniband and ethernet. The mlx5en module
contains specific code for ethernet functionality only. A mlx5ib
module is in the works for infiniband support.
Supported hardware:
- ConnectX-4: 10/20/25/40/50/56/100Gb/s speeds.
- ConnectX-4 LX: 10/25/40/50Gb/s speeds (low power consumption)
Refer to the mlx5en(4) manual page for a comprehensive list.
The team porting the mlx5 driver(s) to FreeBSD:
- Hans Petter Selasky <hselasky@freebsd.org>
- Oded Shanoon <odeds@mellanox.com>
- Meny Yossefi <menyy@mellanox.com>
- Shany Michaely <shanim@mellanox.com>
- Shahar Klein <shahark@mellanox.com>
- Daria Genzel <dariaz@mellanox.com>
- Mark Bloch <markb@mellanox.com>
Differential Revision: https://reviews.freebsd.org/D4163
Submitted by: Mark Block <markb@mellanox.com>
Sponsored by: Mellanox Technologies
Reviewed by: gnn @
MFC after: 3 days
Fix zfs(8) not formatting due to wrong macro (Oc) in the syntax for the new
zfs set multiple dataset properties option.
PR: 204631
Submitted by: Thomas Eberhardt
Sponsored by: Multiplay
RX buffers from number of received packets.
Differential Revision: https://reviews.freebsd.org/D4178
Submitted by: Drew Gallatin <gallatin@freebsd.org>
Sponsored by: Mellanox Technologies
MFC after: 3 days
