Assert that the hold count has not fallen below the use count, a situation
that would only happen when a vref() (or similar) is erroneously paired
with a vdrop(). This situation has not been observed in the wild, but
could be helpful for someone implementing a new filesystem.
Reviewed by: kib
Approved by: hrs (mentor)
boundary. This was addressed several years ago by creating a parent
tag hierarchy for the root buses that set the boundary restriction
for appropriate buses and allowed child deviced to inherit it.
Somewhere along the way, this restriction was turned into a case for
marking the tag as a candidate for needing bounce buffers, instead
of just splitting the segment along the boundary line. This flag
also causes all maps associated with this tag to be non-NULL, which
in turn causes bus_dmamap_sync() to take the slow path of function
pointer indirection to discover that there's no bouncing work to
do. The end result is a lot of pages set aside in bounce pools
that will never be used, and a slow path for data buffers in nearly
every DMA-capable PCIe device. For example, our workload at Netflix
was spending nearly 1% of all CPU time going through this slow path.
Fix this problem by being more selective about when to set the
COULD_BOUNCE flag. Only set it when the boundary restriction
exists and the consumer cannot do more than a single DMA segment
at once. This fixes the case of dynamic buffers (mbufs, bio's)
but doesn't address static buffers allocated from bus_dmamem_alloc().
That case will be addressed in the future.
For those interested, this was discovered thanks to Dtrace Flame
Graphs.
Discussed with: jhb, kib
Obtained from: Netflix, Inc.
MFC after: 3 days
Set the accessed and dirty bits in the page table entry. If it fails then
restart the page table walk from the beginning. This might happen if another
vcpu modifies the page tables simultaneously.
Reviewed by: alc, kib
$alias used to hold alias number, but now it carries full variable name,
so messages were tuned to account for that.
Other fixes:
- eliminate unneeded double spaces;
- tell user where inet/inet6 keywords are expected to be.
Reviewed by: hrs
MFC after: 1 week
ismt(4) supports the SMBus Message Transport controller found on Intel
C2000 series (Avoton) and S1200 series (Briarwood) Atom SoCs.
Sponsored by: Intel
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.
Reviewed by: imp
on execve(2), it calls vmspace_exec(), which frees the current
vmspace. The thread executing an exec syscall gets new vmspace
assigned, and old vmspace is freed if only referenced by the current
process. The free operation includes pmap_release(), which
de-constructs the paging structures used by hardware.
If the calling process is multithreaded, other threads are suspended
in the thread_suspend_check(), and need to be unsuspended and run to
be able to exit on successfull exec. Now, since the old vmspace is
destroyed, paging structures are invalid, threads are resumed on the
non-existent pmaps (page tables), which leads to triple fault on x86.
To fix, postpone the free of old vmspace until the threads are resumed
and exited. To avoid modifications to all image activators all of
which use exec_new_vmspace(), memoize the current (old) vmspace in
kern_execve(), and notify it about the need to call vmspace_free()
with a thread-private flag TDP_EXECVMSPC.
http://bugs.debian.org/743141
Reported by: Ivo De Decker <ivo.dedecker@ugent.be> through secteam
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
default for newsyslog(8).
The /usr/local/etc/newsyslog.conf.d will give packages an opportunity to
install a default configuration to handle their own log files.
MFC after: 2 weeks
Relnotes: yes
birthday-paradox style address collisions when
bhyve VMs are connected to the same broadcoast
domain and are using pseudo-random allocations.
Reviewed by: gnn
MFC after: 1 week
Targets thus marked are supposed to run even with -n.
As such they should not do anything except run the sub-make.
Use an intermediate target _* to associate with _SUBDIR and which
depends on installincludes etc so that we get the correct behavior with -n.
Reviewed by: marcel
This is intended to help in diagnostics and debugging of NIC and stack
flowid support.
Eventually this will grow another column (RSS CPU ID) but
that currently isn't cached in the inpcb.
There's also no clean flowtype -> flowtype identifier string. This is
the mbuf M_HASHTYPE_* values for RSS.
Here's some example output:
adrian@adrian-hackbox:~/work/freebsd/head/src % netstat -Rn | more
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address flowid ftype
tcp4 0 0 10.11.1.65.22 10.11.1.64.12409 29041942 2
udp4 0 0 127.0.0.1.123 *.* 00000000 0
udp6 0 0 fe80::1%lo0.123 *.* 00000000 0
udp6 0 0 ::1.123 *.* 00000000 0
udp4 0 0 10.11.1.65.123 *.* 00000000 0
Tested:
* amd64 system w/ igb NIC; local driver changes to expose RSS flowid in if_igb.
g_orphan_register and g_resize_provider_event. Both are called from the
event queue. Also we have GEOM_DEV class, which does deferred destroy
for its consumers via g_dev_destroy (also called from the event queue).
So it is possible, that for some consumers an orphan method will be
called twice. This triggers panic in g_dev_orphan.
Check that consumer isn't already orphaned before call orphan method.
MFC after: 2 weeks
Replace with the existing loop termination test with a similar
condition from the nested "if" that may terminate the loop a bit
sooner, but still not too early. This condition can then be removed
from the nested "if". Relocate an operator to be style(9) compliant.
MFC after: 3 days
to a guest physical address.
PG_PS (page size) field is valid only in a PDE or a PDPTE so it is now
checked only in non-terminal paging entries.
Ignore the upper 32-bits of the CR3 for PAE paging.
Intel 40G Ethernet Controller XL710 Family. This is
the core driver, a VF driver called i40evf, will be
following soon. Questions or comments to myself or
my co-developer Eric Joyner. Cheers!
lookup for the inp flowid/flowtype to destination CPU.
This only modifies the case where RSS is enabled and the per-cpu tcp
timer option is enabled. Otherwise the behaviour should be the same
as before.
This is intended to be used by various places that wish to hash some
information about a TCP/UDP/IP flow but don't necessarily have a
live mbuf to do it with.
Refactor rss_m2cpuid() to use the refactored function.
Note that the -c argument's parameter is compared against the digest of
the file, not the file. [1]
Update the "current time" parentheticals for notes about reversing
and colliding the hash functions. [1]
Some general mdoc updates.
PR: docs/188043 [1]
Submitted by: Jamie Landeg-Jones [1]
Approved by: hrs (mentor)
MFC after: 1 week
This is not a comprehensive list, as the variables themselves are spread
out over multiple files, but it is a start.
Add a section to make.conf noting that variables may be set there that
affect ports builds, but refer to ports.7 and elsewhere for the actual
listing; any listing in make.conf.5 would likely become out of date
fairly quickly.
PR: docs/189199
Reviewed by: bdrewery (previous version)
Approved by: hrs (mentor)
- Implement support for interrupt filters in the DWC OTG driver, to
reduce the amount of CPU task switching when only feeding the FIFOs.
- Add common spinlock to the USB bus structure.
MFC after: 2 weeks
- inserting frame enter/leave sequences
- restructuring the vmx_enter_guest routine so that it subsumes
the vm_exit_guest block, which was the #vmexit RIP and not a
callable routine.
Reviewed by: neel
MFC after: 3 weeks
