or 2.0.2. These date back to 1996. Likely not needed for most
people, but good to have on the list for completeness.
# This is part 1 of 2, as I only had time to go through the first few
# directories.
archs and enable splash(4) by default (the non-working screen savers
either don't compile or just have no effect when loaded, i.e. don't
cause harm).
MFC after: 1 week
which serial device to use in that case respectively to not rely on
the OFW names of the input/output and stdin/stdout devices. Instead
check whether input and output refers to the same device and is of
type serial (uart(4) was already doing this) and for the fallback
to a serial console in case a keyboard is the selected input device
but unplugged do the same for stdin and stdout in case the input
device is nonexistent (PS/2 and USB keyboards) or has a 'keyboard'
property (RS232 keyboards). Additionally also check whether the OFW
did a fallback to a serial console in the same way in case the
output device is nonexistent. While at it save on some variables
and for sys/boot/sparc64/loader/metadata.c move the code in question
to a new function md_bootserial() so it can be kept in sync with
uart_cpu_getdev_console() more easily.
This fixes selecting a serial console and the appropriate device
when using a device path for the 'input-device' and 'output-device'
OFW environment variables instead of an alias for the serial device
to use or when using a screen alias that additionally denotes a
video mode (like e.g. 'screen:r1024x768x60') but no keyboard is
plugged in (amongst others). It also makes the code select a serial
console in case the OFW did the same due to a misconfiguration like
both 'input-device' and 'output-device' set to 'keyboard' or to a
nonexisting device (whether the OFW does a fallback to a serial
console in case of a misconfiguration or one ends up with just no
console at all highly depends on the OBP version however).
- Reduce the size of buffers that only ever need to hold the string
'serial' accordingly. Double the size of buffers that may need to
hold a device path as e.g. '/pci@8,700000/ebus@5/serial@1,400000:a'
exceeds 32 chars.
- Remove the package handle of the '/options' node from the argument
list of uart_cpu_getdev_dbgport() as it's unused there and future
use is also unlikely.
MFC after: 1 week
that's been updated via buildworld for about 5 years now...
Note: some of the bin/foo that were duplicated as sbin/foo were likely errors
in the first place.
Note2: This contains some, but not all, of the perl and uucp files as I'd
removed some of them before I started keeping track...
When a drive is newly created, it's state is initially set to 'down',
so it won't allow saving the config to it (thus it will never know of
itself being created). Work around this by adding a new flag, that's
also checked when saving the config to a drive.
ping ICMP payload of packets being sent is increased with given step.
Sweeping pings are useful for testing problematic channels, MTU
issues or traffic policing functions in networks.
PR: bin/82625
Submitted by: Chris Hellberg <chellberg juniper.net> (with some cleanups)
in sysctl_jail_list(). Because of this, jls(8) could enter into
an endless loop. The strange thing is, that we can call jls(8) while
the other one is in loop and it will succeed - SYSCTL_OUT() will
not return ENOMEM there.
Maybe SYSCTL_OUT() returns first ENOMEM, because there is no memory,
but is marking some memory range as wired even on failure and another
SYSCTL_OUT() calls are not going to succeed, because process exceeds
limit of wired memory? ENOVMCLUE.
Anyway. Fix jls(8) to ignore ENOMEM and retry only 4 times.
Submitted by: Niklas Saers
PR: kern/79245
MFC after: 3 days
example in libmemstat.3 was not updated to take this rename into account.
Update the example.
PR: 84946
Submitted by: Wojciech A. Koszek <dunstan at freebsd dot czest dot pl>
MFC after: 1 day
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
could initialise while unlocked if the bridge is not up when setting the inet
address, ether_ioctl() would call bridge_init.
Change it so bridge_init is always called unlocked and then locks before
calling bstp_initialization().
Reported by: Michal Mertl
Approved by: mlaier (mentor)
MFC after: 3 days
to take into account the new default of starting the first partition
after the boot blocks instead of at sector 0. If you used automatic
sizing when the first partition did not start at 0, you would get
an error that the automatically sized partition extended beyond the
end of the disk.
Note that there are probably still many more complex cases where
automatic sizing and placement will not work (e.g. non-contiguous
or out of order partitions).
ignore "no such file" errors only, which I wanted to do.
Because of this I ignored all other errors on dlopen(3) failure as well,
which isn't good.
Fix this situation by calling access(2) on library file first and ignore
only ENOENT error. This allows to report all the rest of dlopen(3) errors.
MFC after: 3 days
points in lookup(). The lock can be dropped safely around VFS_ROOT because
LOCKPARENT semantics with child and perent vnodes coming from different FSes
does not really have any meaningful use. On the other hard, this prevents
easily triggered deadlock on systems using automounter daemon.
rc.d/geli - configures encryption (ask for passphrases, etc.);
rc.d/geli2 - is called after file systems are mounted and mark devices for
detach on last close.
Sponsored by: Wheel Sp. z o.o.
http://www.wheel.pl
MFC after: 3 days
metadata is equal to -1. if we then wanted to attach provider (or change
keys) and forget about '-p' flag it failed on assertion (quite ok, without
assertion it could call PKCS#5v2 with 4294967295 iterations).
Instead of failing on assertion, remind about '-p' flag.
MFC after: 3 days
some of the options test, specifically the joliet and rockridge tests.
Since the root mount callchain doesn't go through cd9660_cmount, the
default mount options aren't set. Rather than having the main codepath
assume the options are there, test for the absence of the inverted
optioin
e.g. instead of vfs_flagopt(.. "joliet" ..), test for
!vfs_flagopt(.. "nojoliet" ..)
This works for root mount, non-root mount and future nmount cases.
- in cd9660_cmount, remove inadvertent setting of "gens" when "extatt"
was set.
Reported by: grehan, Dario Freni <saturnero at freesbie org>
Tested by: Dario Freni
Not objected to by: phk
MFC after: 3 days
missing from ${WORKDIR}/files/.
This bug was caused by the astonishing interaction of "return" and
pipelines; in the following code, the "return" does not exit the
function, but instead exits the subshell which was spawned for the last
element of the pipeline; consequently, the output produced is "foo".
foo() {
echo bar | while read baz; do
if [ ${baz} = "bar" ]; then
return 1
fi
done
echo foo
}
Reported by: simon
high FP registers. It was not that the IPI got lost due to the
perceived unreliability of the IPI delivery, but rather that the
IPI was not assigned a vector (ugh). Sending a 0 vector to a CPU
results in a stray external interrupt.
Add a KASSERT to ipi_send() to catch this. The initialization of
the IPIs could be better, but it's not at all sure what the future
of the code is. Avoid wasting a lot of time on something that is
going to be rewritten anyway.
vm_pager_init() is run before required nswbuf variable has been set
to correct value. This caused system to run with single pbuf available
for vnode_pager. Handle both cluster_pbuf_freecnt and vnode_pbuf_freecnt
variable in the same way.
Reported by: ade
Obtained from: alc
MFC after: 2 days
