Current way, hardcoded value plus heuristic is not conform to the PCI(e)
specification and it fails on systems where MSI-X bar is not initialized by
BIOS/ACPI (many arm or arm64 systems for example).
Instead, use the standard PCI(e) capability for determining of
MSIX table bar address.
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27265
One of the disadvantages of our current busdma code is the fact that
we process the bounced buffer in a page-by-page manner. This means that
the short (subpage) buffer allocated across page boundaries is bounced
to 2 separate pages.
This suboptimal behavior is consistent across all platforms and can be
related to (probably unimplementable or incompatible with bouncing)
BUS_DMA_KEEP_PG_OFFSET flag.
Therefore, allocate one additional page to be fully comply with this
requirement.
Discused with: markj
PR: 251018
Only for the arches that provide user-mode TLS.
PR: 251651
Requested by: yuri
Discussed with: emaste, jilles, tijl
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27495
MFC after: 2 weeks
- Use a uintptr_t cast to get the virtual address of a pointer in
USB_P2U() instead of a ptrdiff_t.
- Add offsets to a char * pointer directly without roundtripping the
pointer through a ptrdiff_t in USB_ADD_BYTES().
Reviewed by: imp, hselasky
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27581
The sense_ptr thing is quite broken. As near as I can tell, the
driver tries to copyout to a physical address rather than whatever
user address the sense buffer should be copied to. It is not
immediately obvious what user address the sense buffer should be
copied to.
Reviewed by: imp
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27578
GDB 6.1.1 was released in June 2004 and is long obsolete. It does not
support all of the architectures that FreeBSD does, and imposes
limitations on the FreeBSD kernel build, such as the continued use of
DWARF2 debugging information.
It was kept (in /usr/libexec/) only for use by crashinfo(8), which
extracts some basic information from a kernel core dump after a crash.
Crashinfo already prefers gdb from port/package if installed.
Future work may add kernel debug support to LLDB or find another path
for crashinfo's needs, but in any case we do not want to ship the
excessively outdated GDB in FreeBSD 13.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27610
Move initialization of num_altsetting under USB_CFG_INIT, else
there will be a page fault when enumerating USB devices.
PR: 251856
MFC after: 1 week
Submitted by: Ma, Horse <Shichun.Ma@dell.com>
Sponsored by: Mellanox Technologies // NVIDIA Networking
We now have a u-boot port and config.txt for booting on all 64bits
variant of the RPI boards (RPI2v1.1, RPI3* and RPI4*) so use
the new u-boot-rpi-arm64 and the config_arm64.txt files.
Discussed with: karels, kevans
Allow setting the alternate interface number to fail when there is only
one alternate setting present, to comply with the USB specification.
Refactor how iface->num_altsetting is computed.
Bump the __FreeBSD_version due to change of core USB structure.
PR: 251856
MFC after: 1 week
Submitted by: Ma, Horse <Shichun.Ma@dell.com>
Sponsored by: Mellanox Technologies // NVIDIA Networking
Limit the number of alternate settings to 256.
Else the alternate index variable may wrap around.
PR: 251856
MFC after: 1 week
Submitted by: Ma, Horse <Shichun.Ma@dell.com>
Sponsored by: Mellanox Technologies // NVIDIA Networking
When r362031 moved local TLB invalidation after shootdown IPI send, it
moved too much. In particular, PCID-mode clearing of the pm_gen
generation counters must occur before IPIs are send, which is in fact
described by the comment before seq_cst fence in the invalidation
functions.
Fix it by extracting pm_gen clearing into new helper
pmap_invalidate_preipi(), which is executed before a call to
smp_masked_tlb_shootdown().
Rest of the local invalidation callbacks is simplified as result, and
become very similar to the remote shootdown handlers (to be merged in
some future).
Move pin of the thread to pmap_invalidate_preipi(), and do unpin in
smp_masked_tlb_shootdown().
Reported and tested by: mjg (previous version)
Reviewed by: alc, cem (previous version), markj
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D227588
Ability to load-balance traffic over multiple path is a must-have thing for routers.
It may be used by the servers to balance outgoing traffic over multiple default gateways.
The previous implementation, RADIX_MPATH stayed in the shadow for too long.
It was not well maintained, which lead us to a vicious circle - people were using
non-contiguous mask or firewalls to achieve similar goals. As a result, some routing
daemons implementation still don't have multipath support enabled for FreeBSD.
Turning on ROUTE_MPATH by default would fix it. It will allow to reduce networking
feature gap to other operating systems. Linux and OpenBSD enabled similar support
at least 5 years ago.
ROUTE_MPATH does not consume memory unless actually used. It enables around ~1k LOC.
It does not bring any behaviour changes for userland.
Additionally, feature is (temporarily) turned off by the net.route.multipath sysctl
defaulting to 0.
Differential Revision: https://reviews.freebsd.org/D27428
The ARM PMU may use single per-core interrupt or may use multiple generic
interrupts, one per core. In this case, special attention must be paid to
the correct identification of the physical location of the core, its order
in the external database (FDT) and the associated cpuid.
Also keep in mind that a SoC can have multiple different PMUs
(usually one per cluster)
Some older PSCI implementations corrupt (or do not pass) the context_id
argument to newly started secondary cores. Although the ideal solution to this
problem is u-boot update, we can find the correct value for the argument (cpuid)
by comparing of real core mpidr register with the value stored in pcu->mpidr.
MFC after: 2 weeks
interface numbering for USB descriptors in userspace. Else certain USB
control requests using the interface number, won't be recognized by the
USB firmware.
Refer to section 9.2.3 in the USB 2.0 specification:
Interfaces are numbered from zero to one less than the number of concurrent interfaces
supported by the configuration.
PR: 251784
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
Without this we risk having the .interp section be placed earlier in the
file and mess with section offsets; in particular it has been seen to be
placed at the start of the file and cause the PE/COFF header to not be
at address 0. This is the same fix as was done for arm64 in r365578.
Reviewed by: mhorne, imp
Approved by: mhorne, imp
Differential Revision: https://reviews.freebsd.org/D27603
Linux claims 4.3BSD, we claim 4.4BSD and OpenBSD claims 4.3BSD-Reno. It turns
out that OpenBSD got it right: the function was added in late 1988 a few months
after 4.3BSD-Tahoe, well in advance of 4.3BSD-Reno.
Reviewed by: bcr
Approved by: bcr
Differential Revision: https://reviews.freebsd.org/D27392
These aligned the address but then always used the least significant
bits of the value in memory, which is the wrong half 50% of the time for
16-bit atomics and the wrong quarter 75% of the time for 8-bit atomics.
These bugs were all present in r178172, the commit that added the mips
port, and have remained for its entire existence to date.
Reviewed by: jhb (mentor)
Approved by: jhb (mentor)
Differential Revision: https://reviews.freebsd.org/D27343
For the first second otime and ntime are equal so no message gets
printed. Instead we should print the countdown right from the start,
although we do it at the end of the first iteration so that if a key has
already been pressed then the message is suppressed.
Reviewed by: imp
Approved by: imp
Differential Revision: https://reviews.freebsd.org/D26935
collision. This avouds an out-of-bounce access in case the peer can
break the cookie signature. Thanks to Felix Wilhelm from Google for
reporting the issue.
MFC after: 1 week
Move the include of langinfo.h out of the WITH_ICONV condition block,
since it is not dependent on ICONV. This was correct when nl_langinfo()
had only been called in the WITH_ICONV case, but that is no longer the
case.
Submitted by: yuripv
Sync libarchive with vendor.
Vendor changes:
Issue #1461: Unbreak build without lzma
Issue #1462: warc reader: Fix build with gcc11
Issue #1463: Fix code compatibility in test_archive_read_support.c
Issue #1464: Use built-in strnlen on platforms where not available
Issue #1465: warc reader: fix undefined behaviour in deconst() function
MFC after: 3 days
X-MFC-With: 368234
