There were two issues:
1. The area given to vt_is_cursor_in_area() was adding the drawable
area offset, something already handled by this function.
2. The cursor was shifted on the screen by the offset of this area
and thus was misplaced or not erased. Furthermore, when reaching
the bottom or right borders, the cursor was either totally
removed or not erased correctly.
MFC after: 1 week
hardware driver update from Mellanox Technologies.
- Remove empty files from the OFED Linux Emulation layer.
- Fix compile warnings related to printf() and the "%lld" and "%llx"
format specifiers.
- Add some missing 2-clause BSD copyrights.
- Add "Mellanox Technologies, Ltd." to list of copyright holders.
- Add some new compatibility files.
- Fix order of uninit in the mlx4ib module to avoid crash at unload
using the new module_exit_order() function.
MFC after: 1 week
Sponsored by: Mellanox Technologies
The timer is restarted whenever a window buffer is marked as dirty or
the mouse cursor moves.
There's still room for improvement. For instance, we should not mark a
window buffer as dirty when this window isn't displayed.
Review: https://reviews.freebsd.org/D683
Reviewed by: ray@
Approved by: ray@
MFC after: 1 week
If DDB is active, we can't use a taskqueue thread to switch away from
the X window, because this thread can't run.
Reviewed by: ray@
Approved by: ray@
MFC after: 1 week
They are used when a panic occurs or when entering a DDB session for
instance.
cngrab() forces a vt-switch to the console window, no matter if the
original window is another terminal or an X session. However, cnungrab()
doesn't vt-switch back to the original window currently.
MFC after: 1 week
With the current implementation, this allows an X11 server to tell
the console it switches a particular window in "graphics mode". This
information is used by the mouse handling code to ignore sysmouse events
in the window taken by the X server: only him should receive those
events.
Reported by: flo@, glebius@, kan@
Tested by: flo@
Reviewed by: kan@
MFC after: 1 week
... not just the visible part.
This fixes a bug where, when switching from eg. vt_vga to vt_fb (ie. the
resolution goes up), the originally hidden, uninitialized area of the
buffer is displayed on the screen. This leads to a missing text cursor
when it's over an unitialized area.
This was also visible when selecting text: the uninitialized area was
not highlighted.
Internally, this area was zeroed: characters were all 0x00000000,
meaning the foreground and background color was black. Now, everything
is filled with a space with a gray foreground color, like the visible
area.
While here, remove the check for the mute flag and always use
TERMINAL_NORM_ATTR as the character attribute (ie. gray foreground,
black background).
MFC after: 1 week
"vm_paging_target() > 0" was a reasonable way of determining if the
inactive queue scan met its target. However, now that other threads
can be allocating pages while the inactive queue scan is running, it's
an unreliable method. The effect of it being unreliable is that we
can start swapping out processes when we didn't intend to.
This issue has existed since the kernel was multithreaded, but the
changes to the inactive queue target in 10.0-RELEASE have made its
effects visible.
This change introduces a more direct method for determining if the
inactive queue scan met its target that is not affected by the actions
of other threads.
Reported by: Steve Polyack
Tested by: pho, Steve Polyack (an earlier version)
MFC after: 1 week
Sponsored by: EMC / Isilon Storage Division
This allows backends to verify they do not draw outside of this area.
This fixes a bug in vt_vga where the text was happily drawn over the
right and bottom margins, when using the Gallant font.
MFC after: 1 week
... not the whole screen. Don't use font offsets in
vt_mark_mouse_position_as_dirty().
This fixes a bug where the mouse position wasn't marked as dirty when
approaching the borders of the drawn area.
MFC after: 1 week
for dirhash cache, setting a target percent to reclaim (exposed via
SYSCTL). This allows to always make some amount of progress keeping the maximum
reclaim age dynamic.
Tested by: pho
Reviewed by: jhb
This fixes a "General protection fault" in vt_vga, where
vt_is_cursor_in_area() erroneously reported that the cursor was over the
text. This led to negative integers stored in "unsigned int" and chaos.
MFC after: 1 week
add opregion handling for drm2 - which exposes some ACPI video configuration
pieces that some Lenovo laptop models use to flesh out which video device
to speak to. This enables the brightness control in ACPI to work these models.
The CADL bits are also important - it's used to figure out which ACPI
events to hook the brightness buttons into. It doesn't yet seem to work
for me, but it does for the OP.
Tested:
* Lenovo X230 (mine)
* OP: ASUS UX51VZ
PR: 190186
Submitted by: Henry Hu <henry.hu.sh@gmail.com>
Reviewed by: dumbbell
tracepoints would continue to generate traps, which would be ignored but
could consume noticeable amounts of CPU if, say, all functions in the kernel
were instrumented.
X-MFC-With: r270067
pre-r270321. Namely, the flags are preserved for SIG_DFL and SIG_IGN
dispositions.
Requested and reviewed by: jilles
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
It's replaced by vd_bitblt_text_t, which gives more context to the
backend and allows it to perform more efficiently when redrawing a given
area.
MFC after: 1 week
Traced processes always have the tracer set as the parent.
Utilize proc_realparent to obtain the right process when needed.
Reviewed by: kib
MFC after: 1 week
Previously they were uncoditionally reparented to init. In effect
it was possible that tracee was never returned to original parent.
Reviewed by: kib
MFC after: 1 week
tunables to modify the default cpu topology advertised by bhyve.
Also add a tunable "hw.vmm.topology.cpuid_leaf_b" to disable the CPUID
leaf 0xb. This is intended for testing guest behavior when it falls back
on using CPUID leaf 0x4 to deduce CPU topology.
The default behavior is to advertise each vcpu as a core in a separate soket.
the vcpu had no caches at all. This causes problems when executing applications
in the guest compiled with the Intel compiler.
Submitted by: Mark Hill (mark.hill@tidalscale.com)
to get upset.
The Qualcomm Atheros reference design code goes through significant
hacks to shut down RX before TX. It doesn't even try do do it in the
driver - it actually makes the DMA stop routines in the HAL shut down
RX before shutting down TX.
So, to make this work for chips that aren't the AR9380 and later, do
it in the driver. Shuffle the TX stop/drain HAL calls to be called
*after* the RX stop HAL call.
Tested:
* AR5413 (STA)
* AR5212 (STA)
* AR5416 (STA)
* AR9380 (STA)
* AR9331 (AP)
* AR9341 (AP)
TODO:
* test ar92xx series NIC and the AR5210/AR5211, in case there's something
even odder about those.
aborted, allowing other threads to run. Without this change thread is just
rescheduled again, that was illustrated by provided test tool.
PR: 192926
Submitted by: eric@vangyzen.net
MFC after: 2 weeks
