Commit Graph

183253 Commits

Author SHA1 Message Date
Andrew Turner
4a90491e55 Subversion requires atomic functions we only support on arm with clang. 2013-08-19 17:44:19 +00:00
John Baldwin
bf59b2c504 Remove incorrect 'const' qualifier from pointers to dynamic string
buffers I added in the previous commit.

Pointy hat to:	jhb
MFC after:	1 month
2013-08-19 17:09:14 +00:00
Andre Oppermann
ed59e60276 Bump __FreeBSD_version to 1000046 after the addition of M_PROTO[9-12]
and removal of M_NOFREE|M_FRAG|M_FIRSTFRAG|M_LASTFRAG mbuf flags.
2013-08-19 16:47:06 +00:00
Rafal Jaworowski
836f82ff43 Do not use pv_kva on ARMv6/v7 and save some space on each vm_page. It's only
relevant for older ARM variants (with virtual cache).

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 16:16:49 +00:00
Rafal Jaworowski
ec34d19b9d Simplify and clean up pmap_clearbit()
There is no need for calling vm_page_dirty() when clearing "modified" flag as
it is already set for that page in pmap_fault_fixup() or pmap_enter() thanks
to "modified" bit emulation.

Also, there is no need for checking PTE "referenced" or "writeable" flags.  If
there is a request to clear a particular flag we should just do it.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 15:58:39 +00:00
Ian Lepore
1662b00871 Allow UART_POLL_FREQ to be set as a kernel option as well as via tunable
(the code was already set up for this, just needs to be in conf/options).

Also, if reporting that polling is being used, report the frequency too.
2013-08-19 15:51:30 +00:00
Rafal Jaworowski
c438c6eb70 Fix ARMv6/v7 mapping's wired status.
Last input argument in pmap_modify_pv() should be a mask of flags to be set.
In pmap_change_wiring() however, the straight wired status was used, which
does not represent valid flags (and is of type boolean).

This commit fixes the issue so that wired flag is passed to pmap_modify_pv()
properly.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 15:36:23 +00:00
Rafal Jaworowski
30f7f10e66 Clear all L2 PTE protection bits before their configuration.
Revise L2_S_PROT_MASK to include all of the protection bits.  Notice that
clearing these bits does not always take away the corresponding permissions
(for example, permission is granted when the bit is cleared). The bits are
cleared but are to be set or left cleared accordingly in pmap_set_prot(),
pmap_enter_locked(), etc.

Clear L2_XN along with L2_S_PROT_MASK in pmap_set_prot() so that all
permissions related bits are cleared before actual configuration.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 15:12:36 +00:00
Rafal Jaworowski
06b6590c4a Simplify pv_entry removal or ARMv6/v7:
- PGA_WRITEABLE indicates that there *might be* a writable mapping for the
  particular page, so to avoid frequent sweeping of the pv_entries whenever
  pmap_nuke_pv(), pmap_modify_pv(), etc. is called, it is sufficient to
  clear that flag if there are no managed mappings for that page anymore
  (notice that only pmap_enter is authorized to set this flag).
- Avoid redundant checking for PVF_WIRED flag when this flag cannot be set
  anyway.
- Clear PGA_WRITEABLE only once for each vm_page instead of multiple,
  redundant clearing it in loop when there are no writeable mappings
  to that page anymore.

Submitted by:	Zbigniew Bodek <zbb@semihalf.com>
Reviewed by:	gber
Sponsored by:	The FreeBSD Foundation, Semihalf
2013-08-19 14:56:17 +00:00
Andre Oppermann
5fc98a7895 Reorder the mbuf defines to make more sense and group related flags
together.

Add M_FLAG_PRINTF for use with printf(9) %b indentifier.

Use the generic mbuf flags print names in the net80211 code and adjust
the protocol specific bits for their new positions.

Change SCTP M_PROTO mapping from 5 to 1 to fit within the 16bit field
they use internally to store some additional information.

Discussed with:	trociny, glebius
2013-08-19 14:25:11 +00:00
Andre Oppermann
7100b4d04a Migrate the net80211 protocol specific use of M_FRAG, M_FIRSTFRAG and
M_LASTFRAG flags to protocol specific flags.

Remove the now unused M_FRAG, M_FIRSTFRAG and M_LASTFRAG mbuf flags.

Discussed with:	trociny, glebius, adrian
2013-08-19 14:07:31 +00:00
Glen Barber
88ffe87afe Add entry for packages-9.2-release directory.
Approved by:	re (implicit)
2013-08-19 14:04:35 +00:00
Andre Oppermann
375c0a8a1c Add four additional M_PROTOFLAGS[9-12] for protocol specific use.
Discussed with:	trociny, glebius, adrian
2013-08-19 13:56:14 +00:00
Andre Oppermann
86bd049144 Add m_clrprotoflags() to clear protocol specific mbuf flags at up and
downwards layer crossings.

Consistently use it within IP, IPv6 and ethernet protocols.

Discussed with:	trociny, glebius
2013-08-19 13:27:32 +00:00
David Chisnall
88169e0388 Add support for parameterised device tree sources to the device tree compiler.
Reviewed by:	brooks
Sponsored by:	DARPA, AFRL
2013-08-19 12:37:13 +00:00
Andre Oppermann
678d7b9461 Move the SCTP specific definition of M_NOTIFICATION onto a protocol
specific mbuf flag from sys/mbuf.h to netinet/sctp_os_bsd.h.  It is
only relevant within SCTP.

Discussed with:	tuexen
2013-08-19 12:30:18 +00:00
Andre Oppermann
aa3cb8fb64 Remove the unused M_NOFREE mbuf flag. It didn't have any in-tree users
for a very long time, if ever.

Should such a functionality ever be needed again the appropriate and
much better way to do it is through a custom EXT_SOMETHING external mbuf
type together with a dedicated *ext_free function.

Discussed with:	trociny, glebius
2013-08-19 11:16:53 +00:00
Andre Oppermann
88388bdcbe Move the global M_SKIP_FIREWALL mbuf flags to a protocol layer specific
flag instead.  The flag is only used within the IP and IPv6 layer 3
protocols.

Because some firewall packages treat IPv4 and IPv6 packets the same the
flag should have the same value for both.

Discussed with:	trociny, glebius
2013-08-19 11:08:36 +00:00
Andre Oppermann
b09dc7e328 Move ip_reassemble()'s use of the global M_FRAG mbuf flag to a protocol layer
specific flag instead.  The flag is only relevant while the packet stays in
the IP reassembly queue.

Discussed with:	trociny, glebius
2013-08-19 10:34:10 +00:00
Andre Oppermann
fb86dfcd2f Remove unused M_FRAG, M_FIRSTFRAG and M_LASTFRAG tagging from ip_fragment().
There wasn't any real driver (and hardware) support for it.  Modern hardware
does full fragmentation/segmentation offload instead.
2013-08-19 10:30:15 +00:00
Andre Oppermann
9d1c4ca773 Remove unused and incomplete support for delayed fragment checksums
from bce(4), bxe(4), mge(4) and ti(4) drivers.
2013-08-19 10:20:20 +00:00
Andrew Turner
55d4588b45 Enable VFP on the Arndale Board. 2013-08-19 08:28:35 +00:00
Rui Paulo
ecc2d99765 Style changes and typos fixed. 2013-08-19 05:48:42 +00:00
Peter Wemm
030ee53fa1 Pass pidfile to bsnmpd if it's been changed (parts cut/pasted from
rc.d/rarpd and rc.d/wpa_supplicant)
2013-08-19 05:37:49 +00:00
Peter Wemm
8913b090d0 Revert r254508. 2013-08-19 05:12:38 +00:00
Justin Hibbits
cc117e2773 Fix some ppc64 dtrace bugs, and enable systrace_freebsd32 for ppc64. 2013-08-19 05:10:46 +00:00
Peter Wemm
25180adf0d Add the optional ability to run as a different user.
Obtained from:	Antique freebsd.org cluster archive images
2013-08-19 04:56:03 +00:00
Ian Lepore
87a6a871e2 Allow a hardware driver to pass clock frequencies into the sdhci driver.
The sdhci spec says that if the base or timeout clock frequency in the
capabilities register is zero, the driver must obtain the frequency "from
another source."  This change defines that other source to be the low-level
hardware driver, which can pre-set the frequencies in slot.max_clk and
slot.timeout_clk before calling sdhci_init_slot().

This helps with a growing number of SoCs that have sdhci base clock
frequencies that either won't fit into the range allowed by the number of
bits available in the capabilities register, or the frequency is runtime-
configurable.
2013-08-19 01:29:13 +00:00
Adrian Chadd
bfd3bbdb11 Don't return ENOTSUPP here - the net80211 pluggable ioctl API will treat
this as the final item in the linker set and not try others.

This stopped the fast frames IOCTLs from being called.
2013-08-18 23:40:30 +00:00
Konstantin Belousov
d91f339823 When code from r254064 in pmap_ts_referenced() drops pv lock and
blocks on a pmap lock, pmap_release() might proceed in parallel and
destroy the pmap mutex, since unlocked pv lock allows to remove pv
entry owned by the pmap.

For now, gate the pmap_release() on write-locked pvh_global_lock.
Since pmap_ts_release() does not unlock the global lock,
pmap_release() would not destroy pmap mutex until the
pmap_ts_referenced() finished.  We cannot enter pmap_ts_referenced()
and encounter a pv entry for the destroyed pmap if pmap_release()
passed the global lock gate, since pmap_remove_pages() would finish
earlier.

Reported by:	jeff, pho
Reviewed by:	alc
Tested by:	pho
Sponsored by:	The FreeBSD Foundation
2013-08-18 21:36:22 +00:00
Adrian Chadd
11e0ddb146 Return the correct status if ieee80211_ff_check() consumes the mbuf.
I broke this when converting the net80211 TX path to use if_transmit.
2013-08-18 20:40:13 +00:00
Pawel Jakub Dawidek
50079a51bb Implement fdclosedir(3) function, which is equivalent to the closedir(3)
function, but returns directory file descriptor instead of closing it.

Submitted by:	Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by:	Google Summer of Code 2013
2013-08-18 20:11:34 +00:00
Pawel Jakub Dawidek
a8717658d3 Remove redundant space. 2013-08-18 20:06:35 +00:00
Tijl Coosemans
ce158c1c41 Change the return type of the fallback implementation of the
atomic_compare_exchange_* macros in stdatomic.h to _Bool.
2013-08-18 19:37:35 +00:00
Ian Lepore
677ee4943a Add a new SDHCI_QUIRK_DONT_SHIFT_RESPONSE for hardware that pre-shifts
the response bits the way we do in software.  While the hardware is just
doing the sensible thing rather than leaving it to the software, it's in
violation of the spec by doing so.  Grrrr.
2013-08-18 19:08:53 +00:00
Olivier Houchard
7f144242fc Increase the max KVA available for general consumption on the Exynos 5.
Submitted by:	Ruslan Bukin <br@bsdpad.com>
2013-08-18 18:08:12 +00:00
Andrew Turner
465f478c8b Enable VFP in the Versatile PB (QEMU) kernel. Tested on QEMU 1.6.0. 2013-08-18 17:18:52 +00:00
Andrew Turner
a61bd6da09 Enable VFP on the CubieBoard and CubieBoard 2. 2013-08-18 16:16:36 +00:00
Pawel Jakub Dawidek
f69e5b30c9 Regenerate after r254491. 2013-08-18 13:38:39 +00:00
Pawel Jakub Dawidek
32536142f6 The cap_rights_limit(2) system calls needs a wrapper for 32bit binaries
running under 64bit kernels as the 'rights' argument has to be split
into two registers or the half of the rights will disappear.

Reported by:	jilles
Sponsored by:	The FreeBSD Foundation
2013-08-18 13:37:54 +00:00
Pawel Jakub Dawidek
d6f6b87647 Move the PAIR32TO64() macro and the RETVAL_HI/RETVAL_LO defines to a
header file for use by other .c files.

Sponsored by:	The FreeBSD Foundation
2013-08-18 13:34:11 +00:00
Jilles Tjoelker
6fbdb9f4f1 Disallow opening a POSIX message queue for execute.
O_EXEC was formerly ignored, so equivalent to O_RDONLY.

Reject O_EXEC with [EINVAL] like the invalid mode 3.
2013-08-18 13:27:04 +00:00
Jilles Tjoelker
7b22b8da2f dup3(3): Replace copyright notice.
Although I copied dup(2) to create dup3(3), I removed almost all the
non-boilerplate, so dup3(3) is copyright me.

Reported by:	bjk
2013-08-18 13:25:18 +00:00
Andrew Turner
56b8c3f674 Enable VFP support on EFIKA MX. 2013-08-18 11:54:20 +00:00
Pawel Jakub Dawidek
d92167993d Cast argument of is*() ctype functions to unsigned char.
Without the cast there is ambiguity between 0xFF and -1 (EOF).

Suggested by:	jilles
Submitted by:	Mariusz Zaborski <oshogbo@FreeBSD.org>
Sponsored by:	Google Summer of Code 2013
2013-08-18 11:25:42 +00:00
Pawel Jakub Dawidek
f5ffdfc18b Make the "FD" column one character wider, so that "trace" can also align
properly.
2013-08-18 10:44:37 +00:00
Pawel Jakub Dawidek
0237ec97ff Consistently use 'af' as an argument name for address family.
Now both gethostbyname2(3) and gethostbyaddr(3) use the same argument name.
The same argument name is also used in implementations of those functions.
2013-08-18 10:38:59 +00:00
Pawel Jakub Dawidek
c65779d460 Make example more correct (errstr is a pointer, not boolean). 2013-08-18 10:33:46 +00:00
Pawel Jakub Dawidek
e11dc435ba Regenerate after r254481. 2013-08-18 10:31:30 +00:00
Pawel Jakub Dawidek
0dac22d8ea Implement 32bit versions of the cap_ioctls_limit(2) and cap_ioctls_get(2)
system calls as unsigned longs have different size on i386 and amd64.

Reported by:	jilles
Sponsored by:	The FreeBSD Foundation
2013-08-18 10:30:41 +00:00