It was originally written by Sun as part of the STF (Solaris test framework).
They open sourced it in OpenSolaris, then HighCloud partially ported it to
FreeBSD, and Spectra Logic finished the port. We also added many testcases,
fixed many broken ones, and converted them all to the ATF framework. We've had
help along the way from avg, araujo, smh, and brd.
By default most of the tests are disabled. Set the disks Kyua variable to
enable them.
Submitted by: asomers, will, justing, ken, brd, avg, araujo, smh
Sponsored by: Spectra Logic Corp, HighCloud
NVMe support is ready and should be compiled-in
to the ppc64 kernel.
Submitted by: Wojciech Macek <wma@semihalf.org>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
We don't support float in the boot loaders, so don't include
interfaces for float or double in systems headers. In addition, take
the unusual step of spiking double and float to prevent any more
accidental seepage.
or double so ifdef that code out when the numbers aren't float at all.
There's still references in the lmathlib.c, but we don't compile that
for the loader yet.
Differential Revision: https://reviews.freebsd.org/D14472
We need to ensure that we defined Numbers as int64_t everywhere we
build for lua. Previously, we were compiling part of the code with
Numbers as int64_t and part as double. Move lua number definition to a
more-central location
The latter is good, but the former is more elegant and clear about what 'x'
is. Adopt it, preferably only using the latter kind of notation where needed
as values for tables.
2. Sysctls to enable/disable driver_state_dump and error_recovery.
3. Sysctl to control the delay between hw/fw reinitialization and
restarting the fastpath.
4. Stop periodic stats retrieval if interface has IFF_DRV_RUNNING flag off.
5. Print contents of PEG_HALT_STATUS1 and PEG_HALT_STATUS2 on heartbeat
failure.
6. Speed up slowpath shutdown during error recovery.
7. link_state update using atomic_store.
8. Added timestamp information on driver state and minidump captures.
9. Added support for Slowpath event logging
10.Added additional failure injection types to simulate failures.
Added the ability to:
* Create virtual interfaces
* Create vlan interfaces
* Get interface fib
* Get interface groups
* Get interface status
* Get nd6 info
* Get media status
* Get additional ifaddr info in a convenient struct
* Get vhids
* Get carp info
* Get lagg and laggport status
* Iterate over all interfaces and ifaddrs
And add more examples, too.
Note that this is a backwards-incompatible change. But that's ok, because it's
a private library.
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D14463
I've also made some not-insignificant changes/additions to this file, to
include the added constants, ACPI changes, boot environment listing, and
some utility functions.
According to the getpeereid(3) documentation, on failure the value -1 is
returned and the global variable errno is set to indicate the error. We
were returning the error instead.
Obtained from: Apple's Libc-1244.30.3
MFC after: 5 days
search for a thread to steal inside a critical section. Since this
allows the search to be preempted, restart the search if preemption
happens since the search results found earlier may no longer be
valid.
Decrease the latency of starting a thread that may be assigned to
this CPU during the search by polling for incoming threads during
the search and switching to that thread instead of continuing the
search.
Test for stale search results and restart the search before going
through the expense of calling tdq_lock_pair(). Retry some tests
after grabbing the locks since things may have changed while waiting
to get both locks.
Eliminate special case handling for stealing from an SMT peer that
uses 1 as the steal threshold. This can only succeed if a thread
has been assigned but our SMT peer has not yet started executing
it. This is quite rare and when it happens the other SMT thread
is generally waiting for the same tdq lock that we hold. Basically
both SMT threads are racing to grab the same spin lock.
Add the kern.sched.always_steal knob from a ULE patch by jeff@.
Incorporate another idea from Jeff's ULE patch. If the sched_switch()
detects that the CPU is about to go idle, try to steal a thread
before switching to the idle thread. Since the search for a thread
to steal has to be done inside a critical section in this context,
limit the impact on latency by adding the knob kern.sched.trysteal_limit
to limit the topological distance of the search and don't restart
the search if we detect stale results. If this search can't find
an stealable thread, the idle loop can do a more complete search.
Also poll for threads being assigned to this CPU during the search
and switch to them instead of continuing the search. This change
is responsibile for the majority of the improvement in parallel
buildworld times.
In sched_balance_group() change the minimum threshold from stealing
a thread from 1 to 2. Poaching a newly assigned thread from a CPU
that is waking up hasn't yet switched to that thread from idle is
likely very rare and is likely to have the same lock race as is
seen when stealing threads in the idle loop. Also use tdq_notify()
to kick the destintation CPU instead of always sending an IPI.
Update a stale comment, the number of transferable threads is not
calculated.
Reviewed by: kib (earlier version)
Comments by: avg, jeff, mav
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D12130
A super-set of the functionality of jedec_ts(4). jedec_dimm(4) reports asset
information (Part Number, Serial Number) encoded in the "Serial Presence
Detect" (SPD) data on JEDEC DDR3 and DDR4 DIMMs. It also calculates and
reports the memory capacity of the DIMM, in megabytes. If the DIMM includes
a "Thermal Sensor On DIMM" (TSOD), the temperature is also reported.
Reviewed by: cem
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14392
Discussed with: avg, cem
Tested by: avg, cem (previous version, no semantic changes)
Graphics have a tendency to cause 80-col issues, so make an exception to our
standard indentation guidelines for these graphics. This does not hamper
readability too badly.
Two 40-column strings of spaces is trivially replaced with
string.rep(" ", 80)
Add chvgpio(4) driver for Intel Z8xxx SoC family. This product
was formerly known as Cherry Trail but Linux and OpenBSD drivers
refer to it as Cherry View. This driver is derived from OpenBSD
one so the name is kept for alignment with another BSD system.
Submitted by: Tom Jones <tj@enoti.me>
Reviewed by: gonzo, wblock(man page)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D13086
r329725 cleaned up ZFS commands duplicated in multiple places, but userboot
was not setting HAVE_ZFS when MK_ZFS != "no". This resulted in a failure to
boot (as seen in PR 226118) in bhyve, with the following message:
/boot/userboot.so: Undefined symbol "ldi_get_size"
PR: 226118
Glanced at by: imp
signal in the LinuxKPI.
The read(), write() and mmap() system calls can return either EINTR or
ERESTART upon receiving a signal. Add code to figure out the correct
return value by temporarily storing the return code from the relevant
FreeBSD kernel APIs in the Linux task structure.
MFC after: 3 days
Sponsored by: Mellanox Technologies
Remove bitfields from defined structures as they are not portable.
Instead use shift and mask macros in the driver and nvmecontrol application.
NVMe is now working on powerpc64 host.
Submitted by: Michal Stanek <mst@semihalf.com>
Obtained from: Semihalf
Reviewed by: imp, wma
Sponsored by: IBM, QCM Technologies
Differential revision: https://reviews.freebsd.org/D13916
This change is designed to account for yet another difference between
illumos and FreeBSD VFS. In FreeBSD a filesystem driver is supposed to
clean up mnt_data in its VFS_UNMOUNT method because it's the last call
into the driver before a struct mount object is destroyed. The VFS
drains all references to the object before destroying it, but for the
driver it's already as good as gone.
In contrast, illumos VFS provides another method, VFS_FREEVFS, that is
called when all references are drained. So, the driver can keep its
data after VFS_UNMOUNT and clean it up in VFS_FREEVFS after all
references are gone. This is what ZFS does on illumos.
So there a reference to a filesystem is sufficient to guarantee that the
ZFS specific data, aka zfsvfs_t, stays around (even if the filesystem
gets unmounted). In FreeBSD we need to vfs_busy the filesystem to get
the same guarantee. vfs_ref guarantees only that the struct mount is
kept.
The following rules should be observed in getzfsvfs / getzfsvfs_impl on
FreeBSD:
- if we need access to zfsvfs_t then we must use vfs_busy
- if only we need to access struct mount (aka vfs_t), then vfs_ref is
enough
- when illumos code actually needs only the vfs_t, they still can pass
the zfsvfs_t and get the vfs_t from it; that can work in FreeBSD if
the filesystem is busied, but when it's just referenced then we have
to pass the vfs_t explicitly
- we cannot call vfs_busy while holding a dataset because that creates a
LOR with dp_config_rwlock
As a result:
- getzfsvfs_impl now only references the filesystem, same as in illumos,
but unlike illumos it has to return the vfs_t
- the consumers are updated to account for the change
- getzfsvfs busies the filesystem (and drops the reference from
getzfsvfs_impl)
Also, zfs_unmount_snap() now gets a busied a filesystem, references it
and then unbusies it essentially reverting actions done in getzfsvfs.
This is needed because the code may perform some checks that require the
zfsvfs_t. So, those are done before the unbusying.
MFC after: 2 weeks
vrele() acquires the vnode lock only if the hold count drops to zero.
In other scenarios it needs only the interlock. So,
zfsctl_snapdir_lookup() can race with vfs_mount_destroy() -> vrele()
such that the lookup adds a new reference and then vrele() drops the
mountpoint's reference and only then we check the reference count.
It would be just one in this case.
In fact, the assert should have been removed in r323483 when the code
learned how to deal with the uncovered vnode.
PR: 225795
MFC after: 4 days
X-MFC with: r329556
after r190575 there is an option to call rc.firewall with the firewall_type
passed in as an argument.
Submitted by: David P. Discher <dpd@dpdtech.com>
MFC after: 3 weeks.
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D14286
Now that we're queueing BIO_DELETE requests in the CAM I/O scheduler,
it make sense to try to combine as many as possible into a single
request to send down to hardware. Hopefully, lots of larger requests
like this are better than lots of individual transactions.
Note for future: need to limit based on total size of the trim
request. Should also collapse adjacent ranges where possible to
increase the size of the max payload.
Sponsored by: Netflix
Introduce flags word to describe the capacities of the peripheral.
First bit will describe if the periph driver allows multiple
outstanding TRIMS to be active in a device.
Modify the I/O scheduler so that the nda driver can queue trims
for a while after the first one arrives. We'll queue until we see
a I/O scheduler tick, then we'll schedule as many TRIMs as allowed
by other factors (currently this is slocts in the NVMe controller).
This mariginally helps the read latency issues we see with reads,
but sets the stage for the nda driver to do TRIM collapsing like the
da and ada drivers do today.
Sponsored by: Netflix
To help implement a policy of 'queue all trims until next I/O sched
tick' policy to help coalesce them, note when we tick so we can do
something special on the first call after the tick to get more work.
Sponsored by: Netflix
While the code for ada and da both assume that the trim list is
ordered when doing the coaleascing the TRIMs, it turns out that
creating the sorted list uses more resources than are saved by having
slightly fewer trims sent to the device.
Sponsored by: Netflix
We require some --globals due to custom loader extensions in our
environment. Add everything required for this to tools/boot so that other
interested parties can get up and go with linting our scripts and not get a
bunch of false-positives.
luacheck pointed out an assortment of issues, ranging from non-standard
globals being created as well as unused parameters, variables, and redundant
assignments.
Using '_' as a placeholder for values unused (whether it be parameters
unused or return values unused, assuming multiple return values) feels clean
and gets the point across, so I've adopted it. It also helps flag candidates
for cleanup later in some of the lambdas I've created, giving me an easy way
to re-evaluate later if we're still not using some of these features.
