Previously, x86 used static ranges of IRQ values for different types
of I/O interrupts. Interrupt pins on I/O APICs and 8259A PICs used
IRQ values from 0 to 254. MSI interrupts used a compile-time-defined
range starting at 256, and Xen event channels used a
compile-time-defined range after MSI. Some recent systems have more
than 255 I/O APIC interrupt pins which resulted in those IRQ values
overflowing into the MSI range triggering an assertion failure.
Replace statically assigned ranges with dynamic ranges. Do a single
pass computing the sizes of the IRQ ranges (PICs, MSI, Xen) to
determine the total number of IRQs required. Allocate the interrupt
source and interrupt count arrays dynamically once this pass has
completed. To minimize runtime complexity these arrays are only sized
once during bootup. The PIC range is determined by the PICs present
in the system. The MSI and Xen ranges continue to use a fixed size,
though this does make it possible to turn the MSI range size into a
tunable in the future.
As a result, various places are updated to use dynamic limits instead
of constants. In addition, the vmstat(8) utility has been taught to
understand that some kernels may treat 'intrcnt' and 'intrnames' as
pointers rather than arrays when extracting interrupt stats from a
crashdump. This is determined by the presence (vs absence) of a
global 'nintrcnt' symbol.
This change reverts r189404 which worked around a buggy BIOS which
enumerated an I/O APIC twice (using the same memory mapped address for
both entries but using an IRQ base of 256 for one entry and a valid
IRQ base for the second entry). Making the "base" of MSI IRQ values
dynamic avoids the panic that r189404 worked around, and there may now
be valid I/O APICs with an IRQ base above 256 which this workaround
would incorrectly skip.
If in the future the issue reported in PR 130483 reoccurs, we will
have to add a pass over the I/O APIC entries in the MADT to detect
duplicates using the memory mapped address and use some strategy to
choose the "correct" one.
While here, reserve room in intrcnts for the Hyper-V counters.
PR: 229429, 130483
Reviewed by: kib, royger, cem
Tested by: royger (Xen), kib (DMAR)
Approved by: re (gjb)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16861
error in the function hypercall_memfree(), where the wrong arena was being
passed to kmem_free().
Introduce a per-page flag, VPO_KMEM_EXEC, to mark physical pages that are
mapped in kmem with execute permissions. Use this flag to determine which
arena the kmem virtual addresses are returned to.
Eliminate UMA_SLAB_KRWX. The introduction of VPO_KMEM_EXEC makes it
redundant.
Update the nearby comment for UMA_SLAB_KERNEL.
Reviewed by: kib, markj
Discussed with: jeff
Approved by: re (marius)
Differential Revision: https://reviews.freebsd.org/D16845
Add pmap_activate_boot() for i386, move the invocation on APs from MD
init_secondary() to x86 init_secondary_tail().
Suggested by: alc
Reviewed by: alc, markj
Sponsored by: The FreeBSD Foundation
Approved by: re (marius)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D16893
In pre-SMPng, the global 'imen' was used to track mask state of the
hardware interrupts and was aligned to the masks used by spl*().
When the atpic code was converted to using the x86 interrupt source
abstraction, the global 'imen' was preserved by having each PIC
instance point to an invididual byte in the global 'imen' to hold its
8-bit interrupt mask. The global 'imen' is no longer used for
anything however, so rather than storing pointers in 'struct atpic',
just store the individual 8-bit mask for each PIC as a char.
While here, convert the ATPIC macro to using C99 initializers.
Reviewed by: kib, imp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16827
became unused in FreeBSD 12.x as a side-effect of the NUMA-related
changes.)
Reviewed by: kib, markj
Discussed with: jeff, re@
Differential Revision: https://reviews.freebsd.org/D16825
The MPTable probe code was using PMAP_MAP_LOW as the PA -> VA offset
when searching for the table signature but still using KERNBASE once
it had found the table. As a result, the mpfps table pointed into a
random part of the kernel text instead of the actual MP Table.
Rather than adding more #ifdef's, use BIOS_PADDRTOVADDR from
<machine/pc/bios.h> which already uses PMAP_MAP_LOW on i386 and KERNBASE
on amd64.
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16802
The support for lazy pmap invalidations on i386 was removed in r281707.
This removes the constant for the IPI and stops accounting for it when
sizing the interrupt count arrays.
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16801
At some point memcpy() may be an ifunc, ifunc resolution cannot be done
until CPU identification has been performed, and CPU identification must
be done after loading any microcode updates.
X-MFC with: r337715
Sponsored by: The FreeBSD Foundation
Updates in the format described in section 9.11 of the Intel SDM can
now be applied as one of the first steps in booting the kernel. Updates
that are loaded this way are automatically re-applied upon exit from
ACPI sleep states, in contrast with the existing cpucontrol(8)-based
method. For the time being only Intel updates are supported.
Microcode update files are passed to the kernel via loader(8). The
file type must be "cpu_microcode" in order for the file to be recognized
as a candidate microcode update. Updates for multiple CPU types may be
concatenated together into a single file, in which case the kernel
will select and apply a matching update. Memory used to store the
update file will be freed back to the system once the update is applied,
so this approach will not consume more memory than required.
Reviewed by: kib
MFC after: 6 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16370
Previously, this check was omitted for the first frame pointer.
Reported by: pho
Reviewed by: kib
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16572
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
the AMD document 55449 'Revision Guide for AMD Family 17h Models
00h-0Fh Processors' rev 1.12.
The errata numbers are mentioned near each action.
It seems that newer BIOSes already include required chicken bits
settings, so the magic MSR updates are only needed when BIOS cannot be
updated. On the other hand, MWAIT avoidance seems to be important.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
In order to setup an initial environment and jump into the generic
hammer_time initialization function. Some of the code is shared with
PVHv1, while other code is PVHv2 specific.
This allows booting FreeBSD as a PVHv2 DomU and Dom0.
Sponsored by: Citrix Systems R&D
Allow the hypercall page to be initialized very early, even before
vtophys is functional. Also make the function global so it can be
called by other files.
This will be needed in order to perform the early bringup on PVHv2
guests.
Sponsored by: Citrix Systems R&D
HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.
Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.
This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.
Sponsored by: Citrix Systems R&D
boot_parse_arg to parse a single arg
boot_parse_cmdline to parse a command line string
boot_parse_args to parse all the args in a vector
boot_howto_to_env Convert howto bits to env vars
boot_env_to_howto Return howto mask mased on what's set in the environment.
All these routines return an int that's the bitmask of the args
translated to RB_* flags. As a special case, the 'S' flag sets the
comconsole_speed env var. Any arg that looks like a=b will set the env
key 'a' to value 'b'. If =b is omitted, 'a' is set to '1'. This
should help us reduce the number of redundant copies of these routines
in the tree. It should also give a more uniform experience between
platforms.
Also, invent a new flag RB_PROBE that's set when 'P' is parsed. On
x86 + BIOS, this means 'probe for the keyboard, and if it's not there
set both RB_MULTIPLE and RB_SERIAL (which means show the output on
both video and serial consoles, but make serial primary). Others it
may be some similar concept of probing, but it's loader dependent
what, exactly, it means.
These routines are suitable for /boot/loader and/or the kernel,
though they may not be suitable for the tightly hand-rolled-for-space
environments like boot2.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D16205
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
On arm64 (and possible other architectures) we are unable to use static
DPCPU data in kernel modules. This is because the compiler will generate
PC-relative accesses, however the runtime-linker expects to be able to
relocate these.
In preparation to fix this create two macros depending on if the data is
global or static.
Reviewed by: bz, emaste, markj
Sponsored by: ABT Systems Ltd
Differential Revision: https://reviews.freebsd.org/D16140
The interface already guarantees that the number of hypercall pages is
always going to be 1, see the comment in interface/arch-x86/cpuid.h
Sponsored by: Citrix Systems R&D
devices present.
On at least one machine where it would matter since the ISA timer is
power gated when booted in the UEFI mode, BIOS still reports that the
legacy devices are present. That is, user still have to manually
disable TSC calibration on such machines. Hopefully it will be more
useful in the future.
Discussed with: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed by: royger
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16004
MFC after: 1 week
and also on apic in common and i386 files (except for xen it is optional
only on xenhvm), but it was not ifdefed except on apic in common and i386
files.
This is all that is left from an attempt to build a (sub-)minimal kernel
without any devices. The isa "option" is still used without ifdefs in many
standard files even on amd64. ISAPNP is not optional on at least i386.
ATPIC is not optional on i386 (it is used mainly for Xspuriousint). But
pci is now supposed to be optional on x86.
Expected NMI-s are those than are either generated by the software (such
as a CPU sending NMI to other CPU) or generated by the hardware after
the software configured it to do so (such as NMI-s on PMC events).
Some unexpected NMI-s can be caused by hardware failures and it is
possible to inquire the hardware about them (somewhat like MCA but much
more primitive) using an EISA mechanism. In some cases the origin of
the NMI can remain truly unknown.
This commit should not change any functionality. It just reorganizes
the code, so that it is easier to extend with new checks for the origin
of the NMI. Also, it frees the code that has nothing to do with ISA
from DEV_ISA.
MFC after: 3 weeks
This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.
This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.
To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.
Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552
The TSC-s are checked and synchronized only if they were good
originally. That is, invariant, synchronized, etc.
This is necessary on an AMD-based system where after a wakeup from STR I
see that BSP clock differs from AP clocks by a count that roughly
corresponds to one second. The APs are in sync with each other. Not
sure if this is a hardware quirk or a firmware bug.
This is what I see after a resume with this change:
SMP: passed TSC synchronization test after adjustment
acpi_timer0: restoring timecounter, ACPI-fast -> TSC-low
Reviewed by: kib
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15551
- Add constants for fields in DR6 and the reserved fields in DR7. Use
these constants instead of magic numbers in most places that use DR6
and DR7.
- Refer to T_TRCTRAP as "debug exception" rather than a "trace trap"
as it is not just for trace exceptions.
- Always read DR6 for debug exceptions and only clear TF in the flags
register for user exceptions where DR6.BS is set.
- Clear DR6 before returning from a debug exception handler as
recommended by the SDM dating all the way back to the 386. This
allows debuggers to determine the cause of each exception. For
kernel traps, clear DR6 in the T_TRCTRAP case and pass DR6 by value
to other parts of the handler (namely, user_dbreg_trap()). For user
traps, wait until after trapsignal to clear DR6 so that userland
debuggers can read DR6 via PT_GETDBREGS while the thread is stopped
in trapsignal().
Reviewed by: kib, rgrimes
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15189
Speculative Store Bypass (SSB) is a speculative execution side channel
vulnerability identified by Jann Horn of Google Project Zero (GPZ) and
Ken Johnson of the Microsoft Security Response Center (MSRC)
https://bugs.chromium.org/p/project-zero/issues/detail?id=1528.
Updated Intel microcode introduces a MSR bit to disable SSB as a
mitigation for the vulnerability.
Introduce a sysctl hw.spec_store_bypass_disable to provide global
control over the SSBD bit, akin to the existing sysctl that controls
IBRS. The sysctl can be set to one of three values:
0: off
1: on
2: auto
Future work will enable applications to control SSBD on a per-process
basis (when it is not enabled globally).
SSBD bit detection and control was verified with prerelease microcode.
Security: CVE-2018-3639
Tested by: emaste (previous version, without updated microcode)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Install appropriate pti-aware shootdown IPI handlers, otherwise user
page tables do not get enough invalidations. The non-pti handlers
were used so far.
Reported and tested by: cperciva
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
The intent was to disable IBPB and IBRS around MWAIT, and re-enable on
the sleep end.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
