DTS must be synced with the kernel, add a freebsd,dts-version string in
the root node of each DTS that we compile so we can later in the kernel
check that it contain a correct value.
Reviewed by: imp, mmel
Differential Revision: https://reviews.freebsd.org/D26724
r366344 corrected the optimized amd64 skein assembly implementation, so
we can now enable it again.
Also add a dependency on this Makefile for the skein_block object, so
that it will be rebuit (similar to r366362).
PR: 248221
Sponsored by: The FreeBSD Foundation
r362163 upgraded mountd so that it could handle MAX_NGROUPS
groups for the anonymous user credentials (the ones provided by
-maproot and -mapall exports options).
The problem is that this resulted in every export structure growing by
about 4Kbytes, because the cr_groups field went from 16->MAX_NGROUPS.
This patch fixes this by only including a small 32 element cr_groups in the
structure and then malloc()'ng cr_groups when a larger one is needed.
The value of SMALLNGROUPS is arbitrarily set to 32, assuming most users
used by -maproot or -mapall will be in <= 32 groups.
Reviewed by: kib, freqlabs
Differential Revision: https://reviews.freebsd.org/D26521
r365732 was the first attempt to get an accurate count but it was
writing to some read-only registers to clear them and that obviously
didn't work. Instead, note the counter's value when it is supposed to
be cleared and subtract it from future readings.
dev.<port>.stats.rx_fcs_error should not be serviced from the MPS
register for T6.
The stats.* sysctls should all use T5_PORT_REG for T5 and above. This
must have been missed in the initial T5 support years ago. Fix it while
here.
MFC after: 3 days
Sponsored by: Chelsio Communications
Truncating requires an exclusive lock, but it was not taken if the
filesystem indicates support for shared writes. This only concerns
ZFS.
In particular fixes cp of files which have trailing holes.
Reported by: bdrewery
The module handler code invokes a MOD_UNLOAD event immediately if
MOD_LOAD fails. The result was that if seminit() failed, semunload()
was invoked twice. semunload() is not idempotent however and would
try to remove it's process_exit eventhandler twice resulting in a
panic.
Reviewed by: kib, markj
Obtained from: CheriBSD
MFC after: 1 month
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D26696
Use of dead_vnodeops would result in a panic instead of returning the intended
EOPNOTSUPP error.
While here make sure to abort, not just try to return a partial result.
The former allows the regular lookup to restart from scratch, while the latter
makes it stuck with an unusable vnode.
Reported by: kevans
Single quotes interfere with the workaround put in with r335753 and
aren't necessary in this case. I believe that all the underling issues
with r335753 have been corrected, but need to do more extensive
followup before reverting it as a bad idea.
PR: 240411
MFC After: 2 days (to give it time to get into 12.2)
- When flushing extra lines after all input has been processed, make
sure that local state is reinitialized correctly.
- When -f is specified, make sure to end output with a full newline.
- Fix some style issues and update comments.
- Add some regression tests.
PR: 249308
Submitted by: Yang Zhong <yzhong@freebsdfoundation.org>
MFC after: 3 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D26536
- whitespace at end of input line
- skipping paragraph macro: Pp at the end of Sh
- new sentence, new line
- consider using OS macro: Fx
- AUTHORS section without An macro
- skipping paragraph macro: Pp before Ss
Create the RISC-V NOTES and LINT files. As of r366559, LINT configs are
no longer generated but checked in to the tree.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D26502
Allow the DSCP codepoint also to be configurable
for the traffic in the direction from the initiator
to the target, such that writes and any requests
are also treated in the appropriate QoS class.
Reviewed by: mav
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26714
- no blank before trailing delimiter
- whitespace at end of input line
- sections out of conventional order
- normalizing date format
- AUTHORS section without An macro
Consider the currently in-use TCP options when
calculating the amount of new data to be injected during
SACK loss recovery. That addresses the effect that very small
(new) segments could be injected on partial ACKs while
still performing a SACK loss recovery.
Reported by: Liang Tian
Reviewed by: tuexen, chengc_netapp.com
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26446
This adds a new IP_PROTO / IPV6_PROTO setsockopt (getsockopt)
option IP(V6)_VLAN_PCP, which can be set to -1 (interface
default), or explicitly to any priority between 0 and 7.
Note that for untagged traffic, explicitly adding a
priority will insert a special 801.1Q vlan header with
vlan ID = 0 to carry the priority setting
Reviewed by: gallatin, rrs
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26409
`cpuset -g -x N` along with requested information always prints
message `cpuset: getdomain: Invalid argument'. The EINVAL is returned
from kern_cpuset_getdomain(), since it doesn't expect CPU_LEVEL_WHICH
and CPU_WHICH_IRQ parameters.
To fix the error, do not call cpuset_getdomain() when `-x' is specified.
MFC after: 1 week
Extend netstat to display TCP stack and detailed congestion state
Adding the "-c" option used to show detailed per-connection
congestion control state for TCP sessions.
This is one summary patch, which adds the relevant variables into
xtcpcb. As previous "spare" space is used, these changes are ABI
compatible.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26518
Adding the "-c" option used to show detailed per-connection
congestion control state for TCP sessions.
This is one summary patch, which adds the relevant variables into
xtcpcb. As previous "spare" space is used, these changes are ABI
compatible.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D26518
makeLINT.mk isn't needed or used anymore, remove it and all the files
it uses.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
Now that config(8) has supported include for 19 years, transition to
including the NOTES files. include support didn't exist at the time,
nor did the envvar stuff recently added. Now that it does, eliminate
the building of LINT files by just including everything you need.
Note: This may cause conflicts with updating in some cases.
find sys -name LINT\* -rm
is suggested across this commit to remove the generated LINT
files.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
Without this patch, when vn_generic_copy_file_range() is
doing a large copy, it will remain in the function for a
considerable amount of time, delaying handling of any
outstanding signals until the copy completes.
This patch adds checks for signals that need to be
processed after each successful data copy cycle.
When sig_intr() returns non-zero, vn_generic_copy_file_range()
will return.
The check "if (len < savlen)" ensures that some data
has been copied, so that progress will be made.
Note that, since copy_file_range(2) is allowed to
return fewer bytes copied than requested, it
will never return EINTR/ERESTART when sig_intr()
returns non-zero.
Reviewed by: kib, asomers
Differential Revision: https://reviews.freebsd.org/D26620
We're going to check these files in shortly since we don't need to
generate them anymore. Generated files cause issues for different work
flows anyway.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
LINT config files are about to be checked in directly. Eliminate
building them by hand here from NOTES files.
Reviewed by: kevans
Differential Revision: https://reviews.freebsd.org/D26540
Too many version of UEFI firmware (so far only confirmed on amd64)
don't really support efibootmgr selection of boot. That's the most
reliable, when it works, since there's no guesswork. However, many do
not save, unmolested, the variables that efibootmgr sets, so as a
fallback we also install loader.efi as bootXXX.efi (where XXX is
either aa64 or x64) if it doesn't already exist in /efi/boot on the
ESP. The standard only defines this for removable devices, but it's
almost ubiquitously used as a fallback. Many BIOSes implement a drive
selection feature that takes over the efibootmgr protocol, rendinering
it useless (either generally, or for those vendors not on the short
list). bootxxx.efi works around this. However, we don't install it
unconditionally there, as that breaks some popular multi-boot setups.
MFC After: 1 week
Differential Revision: https://reviews.freebsd.org/D26428
The precedence of the '&' operator is less than of '+'. Added braces
do change the order of evaluation into the natural one, in my opinion.
On the other hand, the value of the expression should not change since
all elements should have page-aligned values.
This fixes a gcc warning reported.
Reported by: adrian
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Normally when a buffer with B_BARRIER is written, the flag is cleared
by g_vfs_strategy() when creating bio. But in some cases FFS buffer
might not reach g_vfs_strategy(), for instance when copy-on-write
reports an error like ENOSPC. In this case buffer is returned to
dirty queue and might be written later by other means. Among then
bdwrite() reasonably asserts that B_BARRIER is not set.
In fact, the only current use of B_BARRIER is for lazy inode block
initialization, where write of the new inode block is fenced against
cylinder group write to mark inode as used. The situation could be
seen that we break dependency by updating cg without written out
inode. Practically since CoW was not able to find space for a copy of
inode block, for the same reason cg group block write should fail.
Reported by: pho
Discussed with: chs, imp, mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26511
Check td_flags for relevant AST requests lock-less. This opens the
race slightly wider where sig_intr() returns false negative, but might
be it is worth it.
Requested by: mjg
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Specifically, if lookup() returned any error and the topping directory
was not latched, which means that (non-existent) path did not returned
to the topping location, give ENOTCAPABLE a priority over the lookup()
error.
PR: 249960
Reviewed by: emaste, ngie
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D26695
Add support for sysctl 'machdep.uprintf_signal' that prints debugging
information on trap signal.
Reviewed by: jhibbits, luporl, bdragon
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D26004
APM BIOS was relevant only to early laptops (approximately P166 or
P200 and slower). These have not been relevant for a long time, and
this code has been untested for a long time (as far as I can
tell). The APM compat code in ACPI and the apm(8) command is not being
retired. Both of these items are still in use (apm(8) is more
scriptable than the replacement acpiconf, for the most part). This has
been commented out of i386 GENERIC since 2002. This code is not
relevant to any other port.
Discussed on: arch@
The correct way to identify the end of the metadata is two adjacent
entries set to zero/MODINFO_END. I made a typo and this was checking the
first entry twice.
Reported by: rpokala
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
The boot metadata (also referred to as modinfo, or preload metadata)
provides information about the size and location of the kernel,
pre-loaded modules, and other metadata (e.g. the EFI framebuffer) to be
consumed during by the kernel during early boot. It is encoded as a
series of type-length-value entries and is usually constructed by
loader(8) and passed to the kernel. It is also faked on some
architectures when booted by other means.
Although much of the module information is available via kldstat(8),
there is no easy way to debug the metadata in its entirety. Add some
routines to parse this data and allow it to be printed to the console
during early boot or output via a sysctl.
Since the output can be lengthly, printing to the console is gated
behind the debug.dump_modinfo_at_boot kenv variable as well as the
BOOTVERBOSE flag. The sysctl to print the metadata is named
debug.dump_modinfo.
Reviewed by: tsoome
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26687
