Previously em(4) requeued the failed mbuf chains from
bus_dmamap_load_mbuf_sg(9) failure to resend it later. However,
bus_dmamap_load_mbuf_sg(9) may never complete its request as the
fragmented frames can have more than EM_MAX_SCATTER segments.
To handle the above EFBIG case, defragment the frame with m_defrag(9)
and free the mbuf chain if it can't deframent the chain due to
resource shortage.
Reviewed by glebius (with improvements)
o Create one more spare DMA map for Rx handler to recover from
bus_dmamap_load_mbuf_sg(9) failure.
o Make sure to update status bit in Rx descriptors even if we failed
to allocate a new buffer. Previously it resulted in stuck condition
and em_handle_rxtx task took up all available CPU cycles.
o Don't blindly unload DMA map. Reuse loaded DMA map if received
packet has errors. This would speed up Rx processing a bit under
heavy load as it does not need to reload DMA map in case of error.
(bus_dmamap_load_mbuf_sg(9) is the most expensive call in driver
context.)
o Update if_iqdrops counter if it can't allocate a mbuf cluster.
With this change it's now possible to see queue dropped packets
with netstat(1).
o Update mbuf_cluster_failed counter if fixup code failed to
allocate mbuf header.
o Return ENOBUFS instead of ENOMEM in case of Rx fixup failure.
o Make adapter->lmp NULL in case of Rx fixup failure. Strictly
specking it's not necessary for correct operation but it makes
the intention clear.
o Remove now unused dropped_pkts member in softc.
With these changes em(4) should survive mbuf cluster allocation
failure on Rx path.
Reviewed by: pdeuskar, glebius (with improvements)
MCLBYTES - ETHER_ALIGN. Previously it applied the alignment fixup code
for oversized frames which would result in reduced performance on
strict alignment archs.
(size_t)(num * size) == 0
but both num and size are nonzero.
Reported by: Ilja van Sprundel
Approved by: jasone
Security: Integer overflow; calloc was allocating 1 byte in
response to a request for a multiple of 2^32 (or 2^64)
bytes instead of returning NULL.
/usr/sbin/{named, lwresd}. Note that POSIX / C99 doesn't technically
allow __DATE__ to be (un|re)defined, but gcc does what we mean anyway.
Approved by: dougb
MFC after: 1 month
page queues-synchronized flag. Reduce the scope of the page queues lock in
vm_fault() accordingly.
Move vm_fault()'s call to vm_object_set_writeable_dirty() outside of the
scope of the page queues lock. Reviewed by: tegge
Additionally, eliminate an unnecessary dereference in computing the
argument that is passed to vm_object_set_writeable_dirty().
created on Windows XP (and others maybe) were not detected.
We detected only those created with newfs_msdos(8).
Submitted by: Tobias Reifenberger <treif@mayn.de>
style(9)ified by: pjd
o when turning off the socket for a 16-bit card, write 0 to INTR register
rather than just tying to just clear the rest bit. this seems to fix
card insert detection after an eject on TI bridges (ricoh bridges work
either way, apparently). This is a MFp4.
o Cope better with TOPIC95 bridges on powerup. According to NetBSD driver,
these bridges don't set POWER_STATE, so cope accordingly in our power
code. They also need a little extra time to settle, so do that as well.
o It appears that we need to turn on/off one of the clocks to the card
when we power up/down that socket on a TOPIC97, also from NetBSD.
o TOPIC97 bridges need to specifically enable LV card support. Unconditionally
do this in the hopes that all laptops that have these chips support LV
voltages (they should, since they are required for CardBus).
o TOPIC register name regularization. Registers specific to models of TOPIC
are now called out as such.
# I need a machine with a TOPIC95 for testing.
space that enables low voltage operation (and maybe other stuff).
Enable the bits in this register so low voltage 16-bit cards may work.
Existance noticed in NetBSD driver.
Instead the threshould is initialized in device attach. Later the
threshold could be increased in Tx underrun error and the new
threshold should be used in xl_init_locked().
think the RealTek PHY needs driver to set RGEPHY_BMCR_AUTOEN bit of
RGEPHY_MII_BMCR register and proper ANAR register setting for manual
media type selection.
This fixes long standing manual media type selection bug in rgephy(4).
Reported by: Jelte Jansen <jelte AT NLnetLabs DOT nl>
Tested by: Jelte Jansen <jelte AT NLnetLabs DOT nl>
Use proper pointer dereference to inform modified mbuf chains to
caller.
While I'm here perform checksum offload setup after loading DMA
maps.
In collaboration with: glebius
Use proper pointer dereference to inform modified mbuf chains to
caller.
While I'm here perform checksum offload setup after loading DMA
maps as m_defrag(9) can return new mbuf chains.
In collaboration with: glebius
request, correctly report the location (usually localhost) to which
a callback will be made when a notification is received for the
monitored host. Previsouly, the name of the monitored host was
reported instead.
MFC after: 2 weeks
WB (write-back) on x86 via control bits in PTEs and PDEs (including making
use of the PAT MSR). Changes include:
- A new pmap_mapdev_attr() function for amd64 and i386 which takes an
additional parameter (relative to pmap_mapdev()) specifying the cache
mode for this mapping. Note that on amd64 only WB mappings are done with
the direct map, all other modes result in a private mapping.
- pmap_mapdev() on i386 and amd64 now defaults to using UC (uncached)
mappings rather than WB. Previously we relied on the BIOS setting up
MTRR's to enforce memio regions being treated as UC. This might make
hw.cbb_start_memory unnecessary in some cases now for example.
- A new pmap_mapbios()/pmap_unmapbios() API has been added to allow places
that used pmap_mapdev() to map non-device memory (such as ACPI tables)
to do so using WB as before.
- A new pmap_change_attr() function for amd64 and i386 that changes the
caching mode for a range of KVA.
Reviewed by: alc
This way one will be able to use provider encrypted on eg. i386 on
eg. sparc64. This doesn't really buy us much today, because UFS isn't
endian agnostic.
We retain backward compatibility by setting G_ELI_FLAG_NATIVE_BYTE_ORDER
flag on devices with version number less than 2 and not converting the
offset.
of C in which the program or library is written.
Note that this is *not* intended to be used across the whole tree. It
is intended to be used for individual libraries or programs which use
specific language features which the compiler must know about in order
to produce correct warnings at high WARNS levels.
MFC after: 1 month
before tagging them. This can help to work around brain-damage in some
switches that fail to pad a frame after untagging it if its length drops
below the minimum. This option is blessed by IEEE Std 802.1Q (2003 Ed.),
paragraph C.4.4.3.b. It's controlled by sysctl net.link.vlan.soft_pad.
Idea by: az
MFC after: 1 week
