Commit Graph

6035 Commits

Author SHA1 Message Date
ed
2c4f8b663c Remove stale inclusion of <ulog.h>.
This tool doesn't require libulog anymore.
2010-01-27 20:32:58 +00:00
delphij
d9a0cd0982 Revised revision 199201 (add interface description capability as inspired
by OpenBSD), based on comments from many, including rwatson, jhb, brooks
and others.

Sponsored by:	iXsystems, Inc.
MFC after:	1 month
2010-01-27 00:30:07 +00:00
jh
904c85a87b Make mdconfig(8) WARNS=6 clean:
- Constify geom_config_get() name argument.
- Add void keyword for usage().
- Initialize mdunit to NULL.
- Don't call md_prthumanval() at all if length is NULL.

Approved by:	trasz (mentor)
2010-01-22 08:51:58 +00:00
rmacklem
1064f8c15f Document the negnametimeo option for mount_nfs as implemented
by r202767. This is a content change.

MFC after:	2 weeks
2010-01-21 21:21:00 +00:00
ed
b28da9a61e Remove stale references to utmp(5) and its corresponding filenames.
I removed utmp and its manpage, but not other manpages referring to it.
2010-01-21 17:25:12 +00:00
mav
9bd3933525 - Add -v argument to camcontrol identify command. It makes camcontrol
print full identify data block.
- Improve identify result view and add TRIM support.
2010-01-20 13:31:12 +00:00
delphij
98e7419fd1 Also output stripeoffset for consumer even if stripesize is zero, while
stripeoffset is non-zero.

Pointed out by:	mav
2010-01-18 19:39:55 +00:00
jh
9e83e75eb5 Print sizes up to INT64_MAX in md_prthumanval().
PR:		bin/125365
Approved by:	trasz (mentor)
MFC after:	2 weeks
2010-01-18 14:07:41 +00:00
ed
ebbfa5188a Raise WARNS for various tools where possible.
Submitted by:	Marius Nünnerich <marius@nuenneri.ch>
2010-01-17 21:56:27 +00:00
ed
28ce486337 Mute some (hidden) warnings about old-style function definitions.
Submitted by:	Marius Nünnerich <marius nuenneri ch>
2010-01-17 21:53:41 +00:00
brueffer
a112824734 Small fixes. 2010-01-17 19:33:32 +00:00
delphij
0683dca976 Stripe offset may be usable even without stripe size known,
so give the output when either is non-zero.

Suggested by:	mav
2010-01-17 08:10:37 +00:00
delphij
16c4a5ec20 Expose stripe offset and stripe size through libgeom and geom(8) userland
utilities.

Reviewed by:	pjd, mav (earlier version)
2010-01-17 06:20:30 +00:00
trasz
ba210e8afe Add gmountver, disk mount verification GEOM class.
Note that due to e.g. write throttling ('wdrain'), it can stall all the disk
I/O instead of just the device it's configured for.  Using it for removable
media is therefore not a good idea.

Reviewed by:	pjd (earlier version)
2010-01-16 09:52:49 +00:00
ru
fdf6718f33 Use the newly brought %U macro. 2010-01-15 16:01:22 +00:00
emaste
2ade2ff6c8 Reject invalid CIDR widths rather than silently stopping at the first
non-digit character.

Due to an issue with rc(8) in a test configuration, ifconfig was being
invoked with the address used again as the width - for example,

  ifconfig vlan0 10.0.0.1/10.0.0.1

Prior to this change, that address/width would be interpreted as
10.0.0.1/10.
2010-01-14 15:27:18 +00:00
ed
4f94c734b6 Port the remaining apps in sbin/ to utmpx; only reboot(8). 2010-01-13 17:59:23 +00:00
ed
6998c5b40b Migrate init(8) towards utmpx.
According to a comment, we cannot safely remove utmpx entries here
anymore. This is because the libc routines may block on file locking. In
an ideal world login(1) should just remove the entries, which is why I'm
disabling this code for now. If it turns out we get lots of stale
entries here, we should figure out a way to deal with that.
2010-01-13 17:58:49 +00:00
gavin
0c2da89ac4 Spell "Hz" correctly wherever it is user-visible.
PR:		bin/142566
Submitted by:	N.J. Mann   njm njm.me.uk
Approved by:	ed (mentor)
MFC after:	2 weeks
2010-01-12 17:59:58 +00:00
mckusick
360184f5a5 Cast 64-bit quantity to intptr_t rather than int so as to work properly
with 64-bit architectures (such as amd64).

Reported by:  Xin LI and Josh Paetzel
2010-01-11 23:33:30 +00:00
mckusick
a5ce2f4ff4 This update utilizes new fsck sysctl commands that allow fsck running
in background mode to correct expected inconsistencies that arise
during directory rename (see immediately previous update to this
file for details). If run on a kernel without the new functionality,
background fsck will simply ignore these inconsistencies rather
than fail.

Reported by:    jeff
2010-01-11 20:05:38 +00:00
mckusick
25670cd155 When renaming a directory it passes through several intermediate
states. First its new name will be created causing it to have two
names (from possibly different parents). Next, if it has different
parents, its value of ".." will be changed from pointing to the old
parent to pointing to the new parent. Concurrently, its old name
will be removed bringing it back into a consistent state. When fsck
encounters an extra name for a directory, it offers to remove the
"extraneous hard link"; when it finds that the names have been
changed but the update to ".." has not happened, it offers to rewrite
".." to point at the correct parent. Both of these changes were
considered unexpected so would cause fsck in preen mode or fsck in
background mode to fail with the need to run fsck manually to fix
these problems.

This update changes these errors to be expected so that in preen
mode fsck will simply fix these transitional errors. For now,
background fsck will note these errors, but will need additional
kernel support to fix them, so will simply ignore them rather than
fail. A future update will allow background fsck to fix these
problems.

Reported by:	jeff
2010-01-11 19:52:40 +00:00
mckusick
5d0cfcfe1d Add some error messages suggested in PR bin/138043. The code to
correct the problem was added in r176575 by delphij on 2008-02-25.

PR:		138043
Reported by:	Heikki Suonsivu
2010-01-07 01:10:49 +00:00
mckusick
7405c67ff0 This corrects a bug that manifested itself as identifying the last
cylinder group of a UFS1 filesystem as bad. The error was in the check
and not in the cylinder group itself. So even though fsck fixed the
cylinder group correctly, it was still endlessly reported as bad.

PR:		141992
MFC after:	2 weeks
Reported by:	Dan Strick
2010-01-07 00:17:36 +00:00
mav
0b756fd13c Increase default block size from 4K to 64K. It was reduces 6 yeard ago,
when trees were big and FAST mode was enabled by default.

So small block size doesn't benefits linear I/O operations in FAST and
significantly slowdowns in ECONOMIC (default) mode. For single stream random
I/Os so small block doesn't give much benefits, as access time is usually
bigger then transfer time there. Same time it requires all heads to seek
together for every single request, reducing performance on parallel load.
2010-01-06 17:12:18 +00:00
gavin
0b338ccc3c Print leading zeros in the UFS2 FSID.
PR:		bin/142155
Submitted by:	Efstratios Karatzas  gpf.kira gmail.com
Approved by:	ed (mentor)
MFC after:	2 weeks
2010-01-06 14:01:28 +00:00
mav
4d057b4b28 For completeness, add -s argument, manually specifying array block size. 2010-01-05 13:25:12 +00:00
trasz
c1156f33b3 Add manual page for gcache(8). 2010-01-03 15:20:52 +00:00
gavin
ddc8c3887e Remove dead code. This section of code is only run in the
(sblock.fs_magic == FS_UFS1_MAGIC) case, so the check within the
loop is redundant.

Submitted by:	Nate Eldredge  nge cs.hmc.edu
Reviewed by:	mjacob
Approved by:	ed (mentor)
MFC after:	1 month
2010-01-02 20:18:10 +00:00
kib
30f8fd80e5 Remove reference to the bug in FreeBSD 2.0.
Submitted by:	Valentin Nechayev <netch segfault kiev ua>
MFC after:	3 days
2010-01-02 17:45:53 +00:00
mbr
59932fbfde Fix typo: s/partion/partition/
Submitted by:	Marc Balmer <marc@msys.ch>
MFC after:	3 days
2010-01-02 17:32:40 +00:00
ed
c251c86f6f Let umount build with -Wold-style-definition. 2009-12-30 06:36:42 +00:00
ed
b9ca89bfc4 ANSIfy almost all applications that use WARNS=6.
I was considering committing all these patches one by one, but as
discussed with brooks@, there is no need to do this. If we ever
need/want to merge these changes back, it is still possible to do this
per application.
2009-12-29 22:53:27 +00:00
ed
f590bf3733 ANSIfy ldconfig and the aout bits it still uses from rtld-aout.
(Why is aout support still there?)
2009-12-29 21:07:17 +00:00
ed
e024647c7a Add forgotten `void' keyword. This function has no arguments. 2009-12-29 09:13:20 +00:00
ed
1e717c9d32 Add missing `void' for functions without arguments.
While there, rename die_you_gravy_sucking_pig_dog() to something that's
less moronic.
2009-12-29 08:49:43 +00:00
antoine
bfd388c026 (S)LIST_HEAD_INITIALIZER takes a (S)LIST_HEAD as an argument.
Fix some wrong usages.
Note: this does not affect generated binaries as this argument is not used.

PR:		137213
Submitted by:	Eygene Ryabinkin (initial version)
MFC after:	1 month
2009-12-28 22:56:30 +00:00
delphij
d56b669882 Make umount(8) WARNS=6 clean:
- Cast delimiter width to integer [1]
 - Solve name conflicts against system header
 - Constify parameters to avoid qualifier conflict

PR:		bin/140017 [1]
Submitted by:	Ulrich Spörlein <uqs spoerlein net> [1]
MFC after:	1 month
Sponsored by:	iXsystems, Inc
2009-12-28 17:57:37 +00:00
ru
e11fe899ea - Display current settings when run without options.
- Revise a manpage to NOT sound confusing. [1]

In collaboration with:	sat [1]
2009-12-26 08:36:02 +00:00
trasz
f04a989f2d Implement NFSv4 ACL support for UFS.
Reviewed by:	rwatson
2009-12-21 19:39:10 +00:00
gavin
9e26e7888c ifconfig(8) is documented to take a ISO 3166-1 country code to set the
regulatory domain with the "country" parameter, but will also take a full
country name.  The man page warns that only the ISO code is unambiguous.
In reality, however, the first match on either would be accepted, leading
to "DE" being interpreted as the "DEBUG" country rather than Germany, and
"MO" selecting Morocco rather than the correct country, Macau.

Fix this by always checking for an ISO CC match first, and only search on
the full country name if that fails.

PR:		bin/140571
Tested by:	Dirk Meyer dirk.meyer dinoex.sub.org
Reviewed by:	sam
Approved by:	ed (mentor)
MFC after:	1 month
2009-12-15 20:44:12 +00:00
luigi
84d17b9dde implement a new match option,
lookup {dst-ip|src-ip|dst-port|src-port|uid|jail} N

which searches the specified field in table N and sets tablearg
accordingly.
With dst-ip or src-ip the option replicates two existing options.
When used with other arguments, the option can be useful to
quickly dispatch traffic based on other fields.

Work supported by the Onelab project.

MFC after:	1 week
2009-12-15 09:46:27 +00:00
luigi
507718c519 fix the indentation for addr: values
MFC after:	3 days
2009-12-15 09:32:35 +00:00
ru
7969d41262 The default balance algorithm has changed from "split" to
(the improved version of) "load".
2009-12-09 11:00:00 +00:00
mav
9a2663dbad Change gmirror default balance algorithm from "split" to "load".
"split" is very ineffective for devices with rotating media as HDDs.
To be effective, it needs that transfer time reduction due to block
splitting was bigger then access time increase due to non-sequential
access. For modern HDDs I was able to reproduce it only with read sizes
of 2MB and above, which is almost not applicable in real life.
"load" algorithm same time is more universal and effective now.

Reviewed by:	pjd
2009-12-08 22:43:29 +00:00
luigi
d0b8e66dba restore setting of sin_len (was removed in 1.146 last february) as
it seems that now it is necessary for 'forward' to work outside lo0.
The bug (and fix) was reported on 8.0. This patch probably applies
to RELENG_7 as well.
It seems that 'pf' has a similar bug.

Submitted by:	Lytochkin Boris
MFC after:	3 days
2009-12-06 18:04:26 +00:00
mav
6a3018e7cf MFp4:
Introduce ATA_CAM kernel option, turning ata(4) controller drivers into
cam(4) interface modules. When enabled, this options deprecates all ata(4)
peripheral drivers (ad, acd, ...) and interfaces and allows cam(4) drivers
(ada, cd, ...) and interfaces to be natively used instead.

As side effect of this, ata(4) mode setting code was completely rewritten
to make controller API more strict and permit above change. While doing
this, SATA revision was separated from PATA mode. It allows DMA-incapable
SATA devices to operate and makes hw.ata.atapi_dma tunable work again.

Also allow ata(4) controller drivers (except some specific or broken ones)
to handle larger data transfers. Previous constraint of 64K was artificial
and is not really required by PCI ATA BM specification or hardware.

Submitted by:	nwitehorn (powerpc part)
2009-12-06 00:10:13 +00:00
ed
171b5b9553 Let init(8) and reboot(8) use utmpx to log wtmp entries.
logwtmp() gets called with the raw strings that are written to disk. For
regular user entries, this isn't too bad, but when booting/shutting
down, the contents get rather cryptic.

Just call the standardized pututxline().
2009-12-05 20:26:55 +00:00
luigi
62461e96f5 fix argument type in the call to expand_number
Submitted by:	gcc 4.3
MFC after:	3 days
2009-12-04 14:18:30 +00:00
luigi
98a49a6613 use qsort_r instead of heapsort;
staticize two functions.

MFC after:	3 days
2009-12-03 12:23:48 +00:00