It could be used for broad range of tasks, such as configuring drive
power management modes, caching, security and any other features and tasks,
not supported by existing drivers.
the GEOM_BSD class -- to translate the absolute offsets in the label to
relative ones. This makes bslabel(8) work correctly with GEOM_PART and
also when the BSD label is nested under arbitrary partitioning schemes.
Inspired by: Eygene Ryabinkin <rea-fbsd@codelabs.ru>
Approved by: re (kib)
GEOM_PART does not exist in the kernel, and 2) the GEOM in
question does not exist.
Additionally abort in case of programming errors that result
in neither the class nor geom not being present in the gctl
request.
Submitted by: "Andrey V. Elsukov" <bu7cher@yandex.ru>
Approved by: re (kib)
* don't clobber proxy entries
* HWMP seq number processing, including discard of old frames
* flush routing table entries based on nexthop
* print route flags in ifconfig
* more debugging messages and comments
Proxy changes submitted by sam.
Approved by: re (kib)
- fix ifconfig to ignore the non-existent interface in the current
network stack in case of '-vnet'.
- in ifconfig: actually use the local variables defined for the
vnet functions rather than modifying the global.
Reviewed by: rwatson
Approved by: re (kib)
* bridge support (sam)
* handling of errors (sam)
* deletion of inactive routing entries
* more debug msgs (sam)
* fixed some inconsistencies with the spec.
* decap is now specific to mesh (sam)
* print mesh seq. no. on ifconfig list mesh
* small perf. improvements
Reviewed by: sam
Approved by: re (kib)
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.
Authentication and encryption are not implemented.
There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).
A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.
Drivers that support mesh networks right now are: ath, ral and mwl.
More information at: http://wiki.freebsd.org/WifiMesh
Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.
Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.
Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s
modularize it so that new transports can be created.
Add a transport for SATA
Add a periph+protocol layer for ATA
Add a driver for AHCI-compliant hardware.
Add a maxio field to CAM so that drivers can advertise their max
I/O capability. Modify various drivers so that they are insulated
from the value of MAXPHYS.
The new ATA/SATA code supports AHCI-compliant hardware, and will override
the classic ATA driver if it is loaded as a module at boot time or compiled
into the kernel. The stack now support NCQ (tagged queueing) for increased
performance on modern SATA drives. It also supports port multipliers.
ATA drives are accessed via 'ada' device nodes. ATAPI drives are
accessed via 'cd' device nodes. They can all be enumerated and manipulated
via camcontrol, just like SCSI drives. SCSI commands are not translated to
their ATA equivalents; ATA native commands are used throughout the entire
stack, including camcontrol. See the camcontrol manpage for further
details. Testing this code may require that you update your fstab, and
possibly modify your BIOS to enable AHCI functionality, if available.
This code is very experimental at the moment. The userland ABI/API has
changed, so applications will need to be recompiled. It may change
further in the near future. The 'ada' device name may also change as
more infrastructure is completed in this project. The goal is to
eventually put all CAM busses and devices until newbus, allowing for
interesting topology and management options.
Few functional changes will be seen with existing SCSI/SAS/FC drivers,
though the userland ABI has still changed. In the future, transports
specific modules for SAS and FC may appear in order to better support
the topologies and capabilities of these technologies.
The modularization of CAM and the addition of the ATA/SATA modules is
meant to break CAM out of the mold of being specific to SCSI, letting it
grow to be a framework for arbitrary transports and protocols. It also
allows drivers to be written to support discrete hardware without
jeopardizing the stability of non-related hardware. While only an AHCI
driver is provided now, a Silicon Image driver is also in the works.
Drivers for ICH1-4, ICH5-6, PIIX, classic IDE, and any other hardware
is possible and encouraged. Help with new transports is also encouraged.
Submitted by: scottl, mav
Approved by: re
Even though I thought this bug was somewhere in the TTY layer, it turns
out init(8) doesn't make sure /dev/console is opened initially properly.
I've added revoke() to two pieces of code:
- death(): Apart from killing the gettys on shutdown, this doesn't
guarantee the TTY to be closed immediately.
- runshutdown(): Just like setctty(), we should revoke /dev/console.
Applications like syslogd may have file descriptors to the console.
bits but isi_state did not follow; expand it to 32 bits and pad to
maintain alignment. Note this is an incompatible change that
requires rebuilding of user applications.
Submitted by: rpaulo, cbzimmer, avatar
internal buffer sizes.
When we 'append', assume we're appending to text. Some MS dhcp servers will
give us a string with the length including the trailing NUL. when we 'append
domain-name', we get something like "search x.y\000 z" in resolv.conf :(
MFC after: 1 week
Security: A buffer overflow (by one NUL byte) was possible.
"profile" files (bandwidth is mandatory when using a
profile, so it makes sense to have everything in one place).
Update the manpage accordingly.
Submitted by: Marta Carbone
version field sent via gif(4)+if_bridge(4). The EtherIP
implementation found on FreeBSD 6.1, 6.2, 6.3, 7.0, 7.1, and 7.2 had
an interoperability issue because it sent the incorrect EtherIP
packets and discarded the correct ones.
This change introduces the following two flags to gif(4):
accept_rev_ethip_ver: accepts both correct EtherIP packets and ones
with reversed version field, if enabled. If disabled, the gif
accepts the correct packets only. This flag is enabled by
default.
send_rev_ethip_ver: sends EtherIP packets with reversed version field
intentionally, if enabled. If disabled, the gif sends the correct
packets only. This flag is disabled by default.
These flags are stored in struct gif_softc and can be set by
ifconfig(8) on per-interface basis.
Note that this is an incompatible change of EtherIP with the older
FreeBSD releases. If you need to interoperate older FreeBSD boxes and
new versions after this commit, setting "send_rev_ethip_ver" is
needed.
Reviewed by: thompsa and rwatson
Spotted by: Shunsuke SHINOMIYA
PR: kern/125003
MFC after: 2 weeks
gpart(8). LBAs in particular are ugly. The ganularity is a sector,
but users expect byte granularity when specifying the size or offset
with a SI unit. Handle LBAs specially to deal with this.
pipes, queues, tags, rule numbers and so on.
These are all different namespaces, and the only thing they have in
common is the fact they use a 16-bit slot to represent the argument.
There is some confusion in the code, mostly for historical reasons,
on how the values 0 and 65535 should be used. At the moment, 0 is
forbidden almost everywhere, while 65535 is used to represent a
'tablearg' argument, i.e. the result of the most recent table() lookup.
For now, try to use explicit constants for the min and max allowed
values, and do not overload the default rule number for that.
Also, make the MTAG_IPFW declaration only visible to the kernel.
NOTE: I think the issue needs to be revisited before 8.0 is out:
the 2^16 namespace limit for rule numbers and pipe/queue is
annoying, and we can easily bump the limit to 2^32 which gives
a lot more flexibility in partitioning the namespace.
MFC after: 5 days
try to load modules by filename out of the current directory where the module
in question may be further up the module path or not in the module path at all.
Also add some text to the man page to help explain what's going on.
Sponsored by: Redacted Consulting
flag from a mount flag to FS-specific flag.
- Simplify usage. Instead of 'mksnap_ffs /mnt/foo /mnt/foo/snap' allow to
give only one argument: 'mksnap_ffs /mnt/foo/snap'. Old usage is also
accepted for now.
- Add an example of how to mount a snapshot.
experimental client is used when the fstype is "newnfs" or the "nfsv4"
option is specified. It includes the addition of the option:
gssname - to specify a client side initiator host based principal name
which is specific to NFSv4.
It also includes a change to mount.c, so that it knows about
mount_newnfs, but not mount_nfs4.
Reviewed by: dfr
Approved by: kib (mentor)
This change allows me to disable -Werror by using NO_WERROR. Right now
I can't build pflogd using Clang, because Clang generates more warnings
when passing -Wall.
- add show as alias for get
- add weights to allow mpath to do more than equal cost
- add sticky / nostick to disable / re-enable per-connection load balancing
This adds a field to rt_metrics_lite so network bits of world will need to be re-built.
Reviewed by: jeli & qingli
fstat(fd, &sb) was not executed unconditionally anymore so sb was read
uninitialised when -C is used.
Submitted by: Christoph Mallon <christoph mallon gmx de>
types of MAC overheads such as preambles, link level retransmissions
and more.
Note- this commit changes the userland/kernel ABI for pipes
(but not for ordinary firewall rules) so you need to rebuild
kernel and /sbin/ipfw to use dummynet features.
Please check the manpage for details on the new feature.
The MFC would be trivial but it breaks the ABI, so it will
be postponed until after 7.2 is released.
Interested users are welcome to apply the patch manually
to their RELENG_7 tree.
Work supported by the European Commission, Projects Onelab and
Onelab2 (contract 224263).
above to avoid referencing undefined terms (humans are not compilers
but still care about these things).
Change some .Sh to .Ss to better reflect the structure of the text.
No new content.
calculation was too agressive. Instead we should only
look at each nibble. This makes it so we make
10.2.0.0 become 10.2/16 NOT 10.2/17.
Need to explore the non-cidr address issue. The two
may not be seperable..
MFC after: 1 week
if a entry is not route add -net xxx/bits then we should use
the addr (xxx) to establish the number of bits by looking at
the first non-zero bit. So if we enter
route add -net 10.1.1.0 10.1.3.5
this is the same as doing
route add -net 10.1.1.0/24
Since the 8th bit (zero counting) is set to 1 we set bits
to 32-8.
Users can of course still use the /x to change this behavior
or in cases where the network is in the trailing part
of the address, a "netmask" argument can be supplied to
override what is established from the interpretation of the
address itself. e.g:
route add -net 10.1.1.8 -netmask 0xff00ffff
should overide and place the proper CIDR mask in place.
PR: 131365
MFC after: 1 week
Not only did these two drivers depend on IFF_NEEDSGIANT, they were
broken 7 months ago during the MPSAFE TTY import. if_ppp(4) has been
replaced by ppp(8). There is no replacement for if_sl(4).
If we see regressions in for example the ports tree, we should just use
__FreeBSD_version 800045 to check whether if_ppp(4) and if_sl(4) are
present. Version 800045 is used to denote the import of MPSAFE TTY.
Discussed with: rwatson, but also rwatson's IFF_NEEDSGIANT emails on the
lists.
The work have been under testing and fixing since then, and it is mature enough
to be put into HEAD for further testing.
A lot have changed in this time, and here are the most important:
- Gvinum now uses one single workerthread instead of one thread for each
volume and each plex. The reason for this is that the previous scheme was
very complex, and was the cause of many of the bugs discovered in gvinum.
Instead, gvinum now uses one worker thread with an event queue, quite
similar to what used in gmirror.
- The rebuild/grow/initialize/parity check routines no longer runs in
separate threads, but are run as regular I/O requests with special flags.
This made it easier to support mounted growing and parity rebuild.
- Support for growing striped and raid5-plexes, meaning that one can extend the
volumes for these plex types in addition to the concat type. Also works while
the volume is mounted.
- Implementation of many of the missing commands from the old vinum:
attach/detach, start (was partially implemented), stop (was partially
implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes
with one plex of these organizations).
- The parity check and rebuild no longer goes between userland/kernel, meaning
that the gvinum command will not stay and wait forever for the rebuild to
finish. You can instead watch the status with the list command.
- Many problems with gvinum have been reported since 5.x, and some has been hard
to fix due to the complicated architecture. Hopefully, it should be more
stable and better handle edge cases that previously made gvinum crash.
- Failed drives no longer disappears entirely, but now leave behind a dummy
drive that makes sure the original state is not forgotten in case the system
is rebooted between drive failures/swaps.
- Update manpage to reflect new commands and extend it with some examples.
Sponsored by: Google Summer of Code 2007
Mentored by: le
Tested by: Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
operations. This allows the query operations to work in non-IPv4 jails,
and will be necessary in a future of possible non-INET networking.
Approved by: bz (mentor)
an alternative program to be used for mounting a file system.
Ideally, all file systems
should be converted to pass string arguments to nmount(), so that
/sbin/mount can handle them. However, certain file systems such as FUSE have
not done this, and want to have their own userland mount programs.
For example, to mount an NTFS file system with the FUSE NTFS driver:
mount -t ntfs -o mountprog=/usr/local/bin/ntfs-3g /dev/acd0 /mnt
or via an fstab entry:
/dev/acd0 /mnt ntfs ro,noauto,mountprog=/usr/local/bin/ntfs-3g 0 0
PR: 120784
Requested by: Dominic Fandrey
filesystem. This avoids confusion with nullfs and unionfs filesystems
which reference the root of a UFS filesystem as a target.
PR: 116849
Approved by: kib
Either use parameters provided by user or make them up.
The code for faking CHS params is borrowed from disklabel code.
The logic for using user-provided and auto-guessed parameters is not
perfect, so to speak.
PR: bin/121182
Approved by: jhb (mentor)
that selects a callback from an interface prefix name. This allows us to
report a meaningful error when the user types 'ifconfig wlan0 create',
for example, and also kills some redundant code.
Reviewed by: sam (earlier version)
distinguish between a typo in the mode name and that the device does not
support a certain mode (till now both causes show the same result, i.e. the old
mode is displayed).
Submitted by: Christoph Mallon <christoph.mallon gmx.de>
Approved by: kib (mentor)
channel modes:
o usurp 'h' mode flag for half-width channels
o add 'q' mode flag for quarter-width channels
o rewrite rate parameter parsing to handle fractional values
o merge mode loops to eliminate ordering assumptions
o replace 0x80 with IEEE80211_RATE_MCS
attributes. The start and end more accurately describe the
space taken by a partition. The offset and size are used to
describe the effective (usable) storage of that partition.
o add missing channel flags for ECM, indoor, and outdoor constraints
o use HT capabilities to short-circuit HT20/HT40 channel construction
o rewrite 1/2 and 1/4 width channel handling yet again; previously
we assumed there was a full-width version of the channel in the
calibration table but that's not always true (e.g. for the Public
Safety Band), now we first check the calibration table for the
exact channel we want then fall back to the heuristics we used before
o fix HT channel construction; wasn't adjusting band edges for HT40
channel bandwidth requirements
in fallback_mount() function.
Add a comment to indicate that the fallback_mount() function
should eventually go away.
Submitted by: Jaakko Heinonen <jh saunalahti fi>
robust. With these changes fsck is now able to detect and reliably
rebuild corrupted cylinder group maps. The -D option is no longer
necessary as it has been replaced by a prompt asking whether the
corrupted cylinder group should be rebuilt and doing so when requested.
These actions are only offered and taken when running fsck in manual
mode. Corrupted cylinder groups found during preen mode cause the fsck
to fail.
Add the -r option to free up excess unused inodes. Decreasing the
number of preallocated inodes reduces the running time of future
runs of fsck and frees up space that can allocated to files. The -r
option is ignored when running in preen mode.
Reviewed by: Xin LI <delphij@>
Sponsored by: Rsync.net
modify the pointer argument passed to it. This triggered an assert in malloc
when a geom command being run under the livefs environment.
PR: bin/130632
Submitted by: Dimitry Andric <dimitry -at- andric.com>
Pointy hat to: me
MFC after: 2 days
things, 1/2 and 1/4 width channels are hidden behind the full width
channel; this is needed because they are ordered such that they
appear after in the channel table
o only include 1/2 and 1/4 width channels when they are specified in the
regulatory database description; previously we treated them as if they
were part of the band and blindly added them for 11a/g
o check the channel list returned in the devcaps to identify whether a
device supports 1/2 or 1/4 width channels on a band; this might be
better brought out as a capability bit to avoid filling the channel
list w/ 1/2 and 1/4 width channels but then cards that only support
these channels in a range of frequencies could not be described (though
right now we don't check frequency range only band)
