R_AARCH64_RELATIVE relocation found on arm64. It would try to add the
contents of the memory location being relocated to the base address and
the relocation addend. This worked when the contents was zero, however
this now seems to be set to the value of the addend so we add this twice.
Fix this by just setting the memory to the computed value.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D8177
that can be compiled on various OSes (including on older versions
of FreeBSD), make it possible to have it include the partitioning
scheme definitions without pulling in FreeBSD specifics.
In particular this means:
o move the scheme definitions iand related defines to header files
under sys/disk,
o make them (more) portable by using uint#_t (where applicable)
and renaming defines so that they at least have a good prefix,
o make the new headers stand-alone so that they don't need FreeBSD
definitions, like struct uuid(*)
o keep the original headers for compatibility, but rewrite them to
get the scheme definitions from <sys/disk/$scheme.h>.
(*) since UUID/GUID type definitions are non-portable and the GPT
scheme uses them, make it possible to have the scheme definitions
use an external type by allowing consumers of the header to set
GPT_UUID_TYPE. When GPT_UUID_TYPE has not been defined, the header
will use it's own type definition, which is the same as struct uuid.
The gpt_uuid_t typedef is created to abstract the details and allows
consumers to refer to a single type.
There is not conflict between the partitioning scheme headers and
what is defined in them. All headers can be included in the same
source files.
Note: consumers of the old headers have not been changed yet. Such
will be done if and when needed/beneficial.
Reviewed by: imp, jhb
MFC after: 1 month
Sponsored by: Bracket Computing
shell, ensure that we do sleep for at least the specified time, in
presence of signals.
Interrupted sleep(3) is followed by _exit(), which might cause 'Going
nowhere without my init' panic if init(8) exits before the reboot(2)
really started, or before SIGTSTP stopped init(8) (both events are
initiated by the parallel reboot(8) operation).
I do not see other calls to sleep(STALL_TIMEOUT) as having the same
disasterous consequences and kept them as is until the similar change
is proven required.
Reported and tested by: Andy Farkas <chuzzwassa@gmail.com>
Sponsored by: The FreeBSD Foundation
MFC after: 3 weeks
- Numerous crash and bug fixes
- Improved warning and error messages
- Permit multiple labels on nodes and properties
- Fix node@address references
- Add support for /delete-node/
- Consume whitespace after a node
- Read the next token before the second /memreserve/
- Fix parsing of whitespace
- Clean up /delete-node/ and add support for /delete-property/
- Handle /delete-node/ specifying a unit address
Obtained from: https://github.com/davidchisnall/dtc @df5ede4
Other uses of cache_purgevfs() do rely on the cache purge for correct
operations, when paths are invalidated without unmount.
Reported and tested by: jkim
Discussed with: mjg
Sponsored by: The FreeBSD Foundation
This should allow vn_fullpath() to work even when vfs name cache is
disabled for zfs, which is the case when zfs properties like
casesensitivity and normalization are set non-default values.
The new code should be 100% reliable for directories and "mostly"
reliable for files, that is, when hardlinks across directories are
not used.
Reported by: Frederic Chardon <chardon.frederic@gmail.com>
Reviewed by: kib (vfs contract)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D8146
With a short needle (aka little) musl's memmem could read past the end
of the haystack (aka big). This was fixed in musl commit c718f9f.
Reviewed by: ed
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8137
original commit log:
=====
I had originally suspected the parsing of ctype definition files as being
the source of the ctype flag mis-definitions, but it wasn't. In the
process, I simplified the cc_list parsing so I'm committing the no-impact
improvement separately. It removes some parsing redundancies and
won't parse partial range definitions anymore.
====
Submitted by: marino
Obtained from: Dragonfly
MFC after: 1 month
This commit is from John Marino in dragonfly with the following commit log:
====
This was a CTYPE encoding error involving consecutive points of the same
ctype. It was reported by myself to Illumos over a year ago but I was
unsure if it was only happening on BSD. Given the cause, the bug is also
present on Illumos.
Basically, if consecutive points were of the exact same ctype, they would
be defined as a range regardless. For example, all of these would be
considered equivalent:
<A> ... <C>, <H> (converts to <A> .. <H>)
<A>, <B>, <H> (converts to <A> .. <H>)
<A>, <J> ... <H> (converts to <A> .. <H>)
So all the points that shouldn't have been defined got "bridged" by the
extreme points.
The effects were recently reported to FreeBSD on PR 213013. There are
countless places were the ctype flags are misdefined, so this is a major
fix that has to be MFC'd.
====
This reveals a bad change I did on the testsuite: while 0x07FF is a valid
unicode it is not used yet (reserved for future use)
PR: 213013
Submitted by: marino@
Reported by: Kurtis Rader <krader@skepticism.us>
Obtained from: Dragonfly
MFC after: 1 month
netmap_kern.h currently requires all drivers including it to include
selinfo.h.
Submitted by: mmacy@nextbsd.org
Reviewed by: gnn
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D5334
In the persist case, take the SYN and FIN flags into account when updating
the sequence space sent.
Reviewed by: gnn
MFC after: 2 weeks
Sponsored by: Juniper Networks, Netflix
Differential Revision: https://reviews.freebsd.org/D7075
Tested by: Limelight, Netflix
Introduce internal counter to track opens. Using provider's counters is
not very successfull after calling g_wither_provider().
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Enter Capsicum capability sandbox pretty early in this setuid program.
Some minor modifications were needed to cache directory fds and use
relative lookups.
Rights restriction of the stdio descriptors is unfortunately pretty messy
because we need an ioctl capability not present in the current libcapsicum
helpers (FIODGNAME).
Reviewed by: ed
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D7999
A premature optimization lead to caching a native-sector sized memory
allocation. If the program examined a 512 byte sector disk, then a 4096
byte sector disk, the program would overrun the cached 512 byte buffer.
Just remove the optimization to fix the bug. This was introduced with the 4Kn
dump support in r298076.
Reported by: markj
Reviewed by: markj, rpokala
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D8162
When tsoome@ added skein support to the ZFS boot code and zfsloader, it
resulted in an explosion in code size, running close to a number of
limits.
The default for the C version of skein is to unroll all loops for
skein-256 and 512
Disabling the loop unrolling saves 20-28kb from each binary
boot1.efi
gptzfsboot
loader.efi
userboot.so
zfsloader
Reviewed by: emaste, tsoome
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D7826
When a syncid bump is pending, any write to the mirror results in the
updated syncid being written to each component's metadata block. However,
the update was only being performed after the writes to the mirror
componenents were queued. Instead, synchronously update the metadata block
first.
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
Consider a mirror with two components, m1 and m2. Suppose a hardware error
results in the removal of m2, with m1's genid bumped. Suppose further that
a replacement mirror component m3 is created and synchronized, after which
the system is shut down uncleanly. During a subsequent bootup, if gmirror
tastes m1 and m2 first, m2 will be removed from the mirror because it is
broken, but the mirror will be started without bumping the syncid on m1
because all elements of the mirror are accounted for. Then m3 will be
added to the already-running mirror with the same syncid as m1, so the
components will not be synchronized despite the unclean shutdown.
Handle this scenario by bumping the syncid of healthy components if any
broken mirrors are discovered during mirror startup.
MFC after: 3 weeks
Sponsored by: Dell EMC Isilon
The source checkout date is not particularly relevant, and this makes
groff man pages build reproducibly.
Reviewed by: bapt
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8158
