http://www.ietf.org/rfc/rfc2401.txt), IPsec is the right word and
already in the dictionary.
PR: in part docs/38668
Reviewed by: murray
MFC after: 10 days
since apparently people were missing that you aren't supposed to access
the name buffer following namei() unless you specify one of these flags.
Pointed out by: green
Obtained from: TrustedBSD Project
Sponsored by: DARPA, NAI Labs
including documenting that ucreds must not be pulled out of thin air,
when to use td_cred vs. p_ucred, how to avoid race conditions in
credential updates, and why to use p_ucred when targetting a thread
or process in an access control operation involving two processes.
Reviewed by: julian, jhb (earlier revision)
these days, and the average user expects ^A and arrow keys to work, however
if they know nothing of editing modes, they will think sh(1) just sucks. It
is likely that because of defaults on most systems and with most shells that
anyone who actually wants vi(1) editing mode will have 'set -o vi'. This
won't affect existing accounts, this way, of course. Only accounts with
.shrc from new etc/skel will be affected. This is much better than making
the change in sh(1).
now needs to set COPY=-C as -C is no longer compatible with the -d
option. It is also likely to be renamed to INSTALL_COPY soon.
Update documentation to reflect this change.
PR: bin/40724
to make it call `install' in the bsd.subdir.mk-driven makefiles
too. (share/examples/Makefile,v 1.29 changed the bsd.prog.mk
to bsd.subdir.mk and many stuff was lost during "make release".
I then merged this change in rev. 1.28.2.2 to work around the
namespace pollution (FILES) in this makefile.)
There was an added complexity here. Both the `distribute' and
`install' targets are recursive (they propagate to SUBDIRs).
So `distribute' first calls `install' in the ${.CURDIR}, then
calls `distribute' in each SUBDIR, etc. The problem is that
`install' (being also recursive) causes the stuff from SUBDIR
to be installed twice, first time thru `install' in ${.CURDIR}
triggered by `distribute', second time by `distribute' run in
the SUBDIR. This problem is not new, but it became apparent
only after I moved the `distribute' target from bsd.obj.mk to
bsd.subdir.mk. My first attempt testing the fix failed due to
this, because the whole world was distributed twice, causing
all the imaginable mess (kerberos5 stuff was installed into both
"base" and "krb5" dists, there was /sbin/init.bak, etc.)
I say the problem is not new because bsd.prog.mk and bsd.lib.mk
makefiles with SUBDIR (even without this fix) had this problem
for years. Try e.g. running ``make distribute DISTDIR=/foo''
from usr.bin/bzip2 or from lib/libcom_err (without the fix) and
watch the output.
So the solution was to make `install' behave non-recursive when
executed by `distribute'. My first attempt in passing SUBDIR=
to the `install' in the `distribute' body failed because of the
way how src/Makefile and src/Makefile.inc1 communicate with each
other. SUBDIR='s assignment precedence on the "make install
SUBDIR=" command line is lowered after src/Makefile wrapper calls
"make ... -f ${.CURDIR}/Makefile.inc1 install" because SUBDIR=
is moved into environment, and Makefile.inc1's assignments now
take higher precedence. This may be fixed someday when we merge
Makefile with Makefile.inc1. For now, this is implemented as a
NO_SUBDIR knob.
Spotted by: Dmitry Pryanishnikov <dmitry@atlantis.dp.ua>
Prodded by: des
MFC after: 3 days
mi_switch(9) is still wildly innacurate. I suggest that every kernel
developer takes 20 minutes a day for the next few days and updates one or
two of his favourite chapter 9 man pages as they are now WAY out of date
in general. I will add a couple of KSE related pages soon.
directives to ensure that all realinstall sub-tasks are executed
after beforeinstall, similarly ensure that all afterinstall sub-
tasks are executed after realinstall. Demonstration:
all: task1 task2
.ORDER: task1 task2
task2: task2_subtask
.ORDER: task1 task2_subtask
task1 task2 task2_subtask:
@sleep `jot -r 1 0 1.0`
@echo ${.TARGET}
Without the second .ORDER directive, task2_subtask can be run in
parallel with task1.
Spotted by: Andrea Campi <andrea@webcom.it>
PR: 38096
Submitted by: Chris Pepper <pepper@rockefeller.edu>
While I'm here correct some typos pointed out by ispell.
Approved by: sheldonh (mentor)
MFC after: 1 week
Provided the (previously missing) dependency on source files
for intermediate .msg files.
Provided the default for NLSSRCDIR (defaults to .CURDIR).
Slightly changed the API: NLS should now list plain locale
names, without the .msg suffix.
When included from bsd.prog.mk, NLSNAME defaults to PROG.
try to avoid ambiguous cases in the future.
Wording approved by: julian (early draft), grog, rwatson, wes and maybe other
members of core I'm forgetting.
and afterinstall targets. Make sure they are run in sequence in the
-j case.
This fixes the recent breakage with beforeinstall being run _after_
realinstall.
Reported by: knu
MAKEDEV: Add MAKEDEV glue for the ti(4) device nodes.
ti.4: Update the ti(4) man page to include information on the
TI_JUMBO_HDRSPLIT and TI_PRIVATE_JUMBOS kernel options,
and also include information about the new character
device interface and the associated ioctls.
man9/Makefile: Add jumbo.9 and zero_copy.9 man pages and associated
links.
jumbo.9: New man page describing the jumbo buffer allocator
interface and operation.
zero_copy.9: New man page describing the general characteristics of
the zero copy send and receive code, and what an
application author should do to take advantage of the
zero copy functionality.
NOTES: Add entries for ZERO_COPY_SOCKETS, TI_PRIVATE_JUMBOS,
TI_JUMBO_HDRSPLIT, MSIZE, and MCLSHIFT.
conf/files: Add uipc_jumbo.c and uipc_cow.c.
conf/options: Add the 5 options mentioned above.
kern_subr.c: Receive side zero copy implementation. This takes
"disposable" pages attached to an mbuf, gives them to
a user process, and then recycles the user's page.
This is only active when ZERO_COPY_SOCKETS is turned on
and the kern.ipc.zero_copy.receive sysctl variable is
set to 1.
uipc_cow.c: Send side zero copy functions. Takes a page written
by the user and maps it copy on write and assigns it
kernel virtual address space. Removes copy on write
mapping once the buffer has been freed by the network
stack.
uipc_jumbo.c: Jumbo disposable page allocator code. This allocates
(optionally) disposable pages for network drivers that
want to give the user the option of doing zero copy
receive.
uipc_socket.c: Add kern.ipc.zero_copy.{send,receive} sysctls that are
enabled if ZERO_COPY_SOCKETS is turned on.
Add zero copy send support to sosend() -- pages get
mapped into the kernel instead of getting copied if
they meet size and alignment restrictions.
uipc_syscalls.c:Un-staticize some of the sf* functions so that they
can be used elsewhere. (uipc_cow.c)
if_media.c: In the SIOCGIFMEDIA ioctl in ifmedia_ioctl(), avoid
calling malloc() with M_WAITOK. Return an error if
the M_NOWAIT malloc fails.
The ti(4) driver and the wi(4) driver, at least, call
this with a mutex held. This causes witness warnings
for 'ifconfig -a' with a wi(4) or ti(4) board in the
system. (I've only verified for ti(4)).
ip_output.c: Fragment large datagrams so that each segment contains
a multiple of PAGE_SIZE amount of data plus headers.
This allows the receiver to potentially do page
flipping on receives.
if_ti.c: Add zero copy receive support to the ti(4) driver. If
TI_PRIVATE_JUMBOS is not defined, it now uses the
jumbo(9) buffer allocator for jumbo receive buffers.
Add a new character device interface for the ti(4)
driver for the new debugging interface. This allows
(a patched version of) gdb to talk to the Tigon board
and debug the firmware. There are also a few additional
debugging ioctls available through this interface.
Add header splitting support to the ti(4) driver.
Tweak some of the default interrupt coalescing
parameters to more useful defaults.
Add hooks for supporting transmit flow control, but
leave it turned off with a comment describing why it
is turned off.
if_tireg.h: Change the firmware rev to 12.4.11, since we're really
at 12.4.11 plus fixes from 12.4.13.
Add defines needed for debugging.
Remove the ti_stats structure, it is now defined in
sys/tiio.h.
ti_fw.h: 12.4.11 firmware.
ti_fw2.h: 12.4.11 firmware, plus selected fixes from 12.4.13,
and my header splitting patches. Revision 12.4.13
doesn't handle 10/100 negotiation properly. (This
firmware is the same as what was in the tree previously,
with the addition of header splitting support.)
sys/jumbo.h: Jumbo buffer allocator interface.
sys/mbuf.h: Add a new external mbuf type, EXT_DISPOSABLE, to
indicate that the payload buffer can be thrown away /
flipped to a userland process.
socketvar.h: Add prototype for socow_setup.
tiio.h: ioctl interface to the character portion of the ti(4)
driver, plus associated structure/type definitions.
uio.h: Change prototype for uiomoveco() so that we'll know
whether the source page is disposable.
ufs_readwrite.c:Update for new prototype of uiomoveco().
vm_fault.c: In vm_fault(), check to see whether we need to do a page
based copy on write fault.
vm_object.c: Add a new function, vm_object_allocate_wait(). This
does the same thing that vm_object allocate does, except
that it gives the caller the opportunity to specify whether
it should wait on the uma_zalloc() of the object structre.
This allows vm objects to be allocated while holding a
mutex. (Without generating WITNESS warnings.)
vm_object_allocate() is implemented as a call to
vm_object_allocate_wait() with the malloc flag set to
M_WAITOK.
vm_object.h: Add prototype for vm_object_allocate_wait().
vm_page.c: Add page-based copy on write setup, clear and fault
routines.
vm_page.h: Add page based COW function prototypes and variable in
the vm_page structure.
Many thanks to Drew Gallatin, who wrote the zero copy send and receive
code, and to all the other folks who have tested and reviewed this code
over the years.
so that /dev/mumble can be the entrypoint to some networking graph,
e.g. a tunnel or a remote tape drive or whatever...
Not fully tested (by me) yet.
Submitted by: Mark Santcroos <marks@ripe.net>
MFC after: 3 weeks
same set of features as in recently added bsd.incs.mk
(FILESGROUPS, accessibility from both bsd.prog.mk and
bsd.lib.mk, de-pessimized typical installation path,
etc.) New standard targets: buildfiles, installfiles,
and files (buildfiles + installfiles).
