Split the QUEUE_MACRO_DEBUG into QUEUE_MACRO_DEBUG_TRACE and
QUEUE_MACRO_DEBUG_TRASH.
Add the debug macrso QMD_IS_TRASHED() and QMD_SLIST_CHECK_PREVPTR().
Document these in queue.3.
Reviewed by: emaste
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D3984
Describe PCI-related kernel options for HotPlug and SR-IOV support in the
pci(4) manual page. While here, add a section describing the various
tunables supported by the PCI bus driver as well.
Reviewed by: wblock
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D7754
mounts in almost all cases instead of in most cases. Don't override
DOINGASYNC() by any condition except IO_SYNC.
Fix previous sprinking of DOINGASYNC() checks. Don't override IO_SYNC
by DOINGASYNC(). In ffs_write() and ffs_extwrite(), there were
intentional overrides that just broke O_SYNC of data. In
ffs_truncate(), there are 5 calls to ffs_update(), 4 with
apparently-unintentional overrides and 1 without; this had no effect
due to the main async mount hack descibed below.
Fix 1 place in ffs_truncate() where the caller's IO_ASYNC was overridden
for the soft updates case too (to do a delayed write instead of a sync
write). This is supposed to be the only change that affects anything
except async mounts.
In ffs_update(), remove the 19 year old efficiency hack of ignoring
the waitfor flag for async mounts, so that fsync() almost works for
async mounts. All callers are supposed to be fixed to not ask for a
sync update unless they are for fsync() or [I]O_SYNC operations.
fsync() now almost works for async mounts. It used to sync the data
but not the most important metdata (the inode). It still doesn't sync
associated directories.
This gave 10-20% fewer writes for my makeworld benchmark with async
mounted tmp and obj directories from an already small number.
Style fixes:
- in ffs_balloc.c, remove rotted quadruplicated comments about the
simplest part of the DOING*() decisions and rearrange the nearly-
quadruplicated code to be more nearly so.
- in ufs_vnops.c, use a consistent style with less negative logic and
no manual "optimization" of || to | in DOING*() expressions.
Reviewed by: kib (previous version)
This will be required for SMP support on MIPS Malta platform.
Reviewed by: adrian
Sponsored by: DARPA, AFRL
Sponsored by: HEIF5
Differential Revision: https://reviews.freebsd.org/D7835
When using diff3 to perform a three-way merge, etcupdate lost the destination
file's metadata. The metadata from the temporary file were used instead.
This was unpleasant for rc.d scripts, which require execute permission.
Use "cat >" to overwrite the destination file's contents while preserving its
metadata.
Reviewed by: bapt
Sponsored by: Dell Technologies
Differential Revision: https://reviews.freebsd.org/D7817
In vm86.c, fix 2 (rarely used) cases where the return code lost the
single-step indicator. While here, fix 2 misspellings of PSL_T as
PSL_TF (TF is the CPU manufacturer's spelling, but we use T).
In trap.c, turn T_PROTFLT and T_STKFLT into T_TRCTRAP if
vm86_emulate() asked for this (it does this when the instruction is
being traced and was successully emulated). In the kernel case, we
used to deliver the trap as SIGTRAP to the process, where it always
terminated the process; now we deliver the trap as T_TRCTRAP to kdb,
where it normally gives single-stepping. In the user case, the only
difference is that we now clear PSL_T and initialize ucode properly.
Reviewed by: kib
Some statuses, such as "ATA pass through information available", are part
part of absolutely normal operation and do not worth reporting.
MFC after: 2 weeks
truncation failed.
Doing so resulted in inconsistent state of the ufs dirhash with regard
to the actual directory inode state, and could lead to spurious ENOENT
errors for lookups of existing files in production kernels, or
assertion failures in the debugging kernels.
Change the logic of calling ufsdirhash_dirtrunc() to be same as in
ufs_direnter(). Execute UFS_TRUNCATE() first, log error, and only do
dirtrunc() if UFS_TRUNCATE() succeeded.
Note that the problem was exacerbated by the bug in the
flush_newblk_dep() function (see r305599), which caused in the spurios
errors from ffs_sync() and then ffs_truncate().
In collaboration with: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The buffer lock is retried on failed LK_SLEEPFAIL attempt, and error
from the failed attempt is irrelevant. But since there is path after
retry which does not clear error, it is possible to return spurious
error from the function.
The issue resulted in a spurious failure of softdep_sync_buf(),
causing further spurious failure of ffs_sync().
In collaboration with: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This change is formally not needed, since i_endoff not used in all
code paths after the call to ufs_direnter(), and i_endoff is
recalculated by the next lookup. But having the value correct makes
the reasoning about code simpler.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
cleared since nothing prevents completion of the parallel quotaoff.
There is nothing to sync in this case, and no reason to panic.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
operations. Instead of upgrading, assert that the lock is exclusive.
Explain the cause in comments.
This effectively reverts r209367.
Tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
going to re-read inodes.
Secondary write initiators, e.g. ufs_inactive(), might need to start a
write while owning the vnode lock. Since the suspended state
established by /dev/ufssuspend prevents them from entering
vn_start_secondary_write(), we get deadlock otherwise.
Note that it is arguably not very useful to re-read inodes after
/dev/ufssuspend suspension, because the suspension does not block
readers, and other threads might read existing files in parallel with
suspension owner (for now, only growfs(8)) operations. This
effectively means that suspension owner cannot safely modify existing
inodes, and then there is no sense in re-reading. But keep the code
enabled for now.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
The GUID string provided by hypervisor has leading and trailing braces,
while our GUID string does not have braces at all. Both braces should
be ignored, when the GUID strings are compared.
Submitted by: Hongjiang Zhang <honzhan microsoft com>
Modified by: sephe
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7809
While I'm here, pull up the channel callback related code too.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7805
The DS_FIELD_LARGE_BLOCKS macro has been unused since the integration of
this patch:
commit ca0cc3918a1789fa839194af2a9245f801a06b1a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Fri Jul 24 09:53:55 2015 -0700
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
The DS_FIELD_LARGE_BLOCKS macro has been unused since the integration of
this patch:
commit ca0cc3918a1789fa839194af2a9245f801a06b1a
Author: Matthew Ahrens <mahrens@delphix.com>
Date: Fri Jul 24 09:53:55 2015 -0700
5959 clean up per-dataset feature count code
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: George Wilson <george@delphix.com>
Reviewed by: Alex Reece <alex@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
This patch simply removes this macro from dsl_dataset.h.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@608764bead
When changing zfs_arc_max (e.g. as zdb does), it may be set to less
than the default arc_c_min. arc_c_min should decrease to not be more than
arc_c_max, but it doesn't; therefore tuning of arc_c_max is ineffective.
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Author: Matthew Ahrens <mahrens@delphix.com>
openzfs/openzfs@608764bead
