submenus. See menusets.4th(8) for additional details including examples.
Discussed on arch and recommended for inclusion at the devsummit.
This change does not alter the appearance or user experience, only enhances
possibilities.
Reviewed by: adrian (co-mentor)
Approved by: adrian (co-mentor)
counter) when the syncache doesn't want the driver to reply to an
incoming SYN. This fixes a harmless bug where tids_in_use would
go out of sync with the hardware counter.
MFC after: 3 days
the non-aggregate path.
I "cheated" by using some TX setup code in our HAL that isn't present
in the atheros HAL (or Linux ath9k.)
The old path for forming aggregates was:
* setup the rate control in the first descriptor;
* call chaintxdesc() on all the frames;
* call setupfirsttxdesc() on the first descrpitor in the first
frame;
* call setuplasttxdesc() on the last descriptor in the last frame.
The new path for forming aggregates looks like the non-aggregate path:
* call setuptxdesc() on the first descriptor in the first frame;
* setup the rate control in the first descriptor;
* call filltxdesc() on each descriptor in the frame;
* if it's an aggregate - call set11n_aggr_{first, middle, last} as
appropriate (see the code for a description of what is "appropriate".)
Now, this is done primarily for the AR9300 HAL - it doesn't implement
the first set of aggregate functions. It just has the older methods
and the "first/middle/last" aggregate methods. So, let's convert the
code to use these.
Note: the AR5416 HAL in FreeBSD had that code (from me, a while ago)
and a previous commit brought it up to behave the same as the AR9300
HAL routines.
There's some further tidyups to be done - specifically, avoid doing
multiple calls to the 11n descriptor functions. I shouldn't call
clr11n_aggr(), then set11n_aggr_middle(), then also set11n_aggr_first().
On (at least MIPS) the TX descriptors are in non-cachable memory and
this will cause multiple slow writes.
I'll debug/tidy that up in a future commit.
Tested:
* AR9280, STA
* AR9280/AR9160, AP
* AR9380, STA (using a local, closed source HAL, sorry!)
the 'PREVENT/ALLOW MEDIUM REMOVAL' SCSI command. An example of such a
device is the STmicro ST72682. We send the SCSI command for every open and
close, which can result in a significant amount of spam on the console
during boot.
Reviewed by: hps@
them, please let me know if not). Most of these are of the form:
static const struct bzzt_type {
[...list of members...]
} const bzzt_devs[] = {
[...list of initializers...]
};
The second const is unnecessary, as arrays cannot be modified anyway,
and if the elements are const, the whole thing is const automatically
(e.g. it is placed in .rodata).
I have verified this does not change the binary output of a full kernel
build (except for build timestamps embedded in the object files).
Reviewed by: yongari, marius
MFC after: 1 week
versions of clang 3.2, about comparing enum uni_cause values against
integer constants which fall outside the enum range. No functional
change.
MFC after: 3 days
temporarily stores characters if the TTY buffer is full when
used a as a console. This can happen when a console is suspended.
Also properly do the flow stop signalling when this happens and
flow start when the condition changes back to normal again.
Bump __FreeBSD_version to force external kernel modules
to be recompiled. No kernel API changes.
MFC after: 1 week
Suggested by: ed @
PNP0510 and FUJ02E5 for a "Wacom Tablet at FuS Lifebook T"
PNP0502 and PNP0511 for some other generic devices.
PR: kern/173357
Submitted by: Andrey Zakharchenko <avz@jscc.ru>
Approved by: cperciva (implicit)
MFC after: 1 week
Otherwise we could fail with an incorrect error if e.g. parent
object id is removed too or we can even return a wrong vnode if
parent object has been already re-used.
Discussed with: pjd
Also see: http://article.gmane.org/gmane.os.freebsd.devel.file-systems/13863
MFC after: 26 days
vn_lock should do the right thing with respect to given vnode lock
flags. If a caller doesn't mind a doomed vnode, then zfs should deliver.
Reviewed by: kib
MFC after: 19 days
It turned out to be not that useful, because its default value may lead
to a problem when a root pool is present in zpool.cache, but its
on-disk status is 'exported'. This may happen if the pool was imported
in a different environment with -f flag and then exported.
MFC after: 12 days
... instead of whatever random value may happen to be in the register.
ecx is important to some cpuid leaves.
To do: extend cpuctl interface to provide for ecx value parameter.
MFC after: 5 days
* don't poke ath_hal_txstart() if nothing was pushed into the FIFO during
the refill process;
* shuffle around the TX debugging output a little so it's logged at
TX hardware enqueue;
* Add logging of the TX status processing.
The copies of initarm used on platforms with FDT support were almost
identical. The differences were pulled out into separate functions that
were called by initarm.
This change merges the, now identical, copies of initarm and a few of it's
support functions. This is a step towards a common kernel on ARMv6.
of small (< 256 byte) aggregate frames.
This needs to be done or 11n aggregation TX just simply doesn't work
on these NICs.
Whilst here, extend some debug printing; I was using this whilst
debugging the TX power setup in the TX descriptor(s) on the AR9380.
programmed on the BSP during (early) boot. This makes sure
that the APs get configured the same as the BSP, irrspective
of how FreeBSD was loaded.
2. Make sure to flush the dcache after writing the TLB1 entries
to the boot page. The APs aren't part of the coherency domain
just yet.
3. Set pmap_bootstrapped after calling pmap_bootstrap(). The
FDT code now maps the devices (like OF), and this resulted
in a panic.
4. Since we pre-wire the CCSR, make sure not to map chunks of
it in pmap_mapdev().
