There is no way to see anything about the faults occuring in
loader.efi. Some intel BIOSes do output a line into serial port at
115200/8/1 regardless of the current port settings with the EFI error
number, but this is too little, and not always available, esp. if the
user does not know where to look.
The patch adds a simple facility to grab exceptions and at least dump
generic registers and some exception details. Due to the relative
complexity of correctly taking over the BIOS IDT setup, only install
the facility on user request.
Two new commands, 'grab_faults' and 'ungrab_faults' are provided,
first one takes over, second undoes the first. It is supposed that
user would execute 'grab' by the developer direction of collecting the
debugging data. The 'fault' command generates exception to test the
setup.
Fault handlers use dedicated stack to improve chances of catching
stack/TSS exceptions. Due to this, BIOS IDT is duplicated into a
private copy, and debugger needs to find a free GDT slot for TSS. This
is done in somewhat complicated efi_redirect_exceptions().
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D7935
CLOCK_GETTIME() with the lock.
Now all time-related accesses to the CMOS for RTC should be under the
lock. This is needed to allow upcoming EFI Runtime Services support
to provide required execution environment for the firmware calls.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Note that lgdt() name is already used for function which, besides
loading GDT, also reloads segment descriptors cache, thus new function
is named bare_lgdt().
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
amd64 pmap.
The new pmap_pinit_pml4() function initializes the level 4 page table
with entries for the kernel mappings. Both functions are needed for
upcoming EFI Runtime Services support.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
There were two bugs:
* There was an accounting bug resulting in reporting a too small a_rwnd.
* There are a bug when abandoning messages in the reassembly queue.
MFC after: 4 weeks
Both can be used to cause processes in capability mode to receive
SIGTRAP when ENOTCAPABLE or ECAPMODE errors are returned from
syscalls.
Idea by: emaste
Reviewed by: oshogbo (previous version), emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D7965
2) Implememt %u for GNU compatibility.
3) Don't forget to advance buf for %w/%u.
4) Fail with incomplete week (week 0) request and no such week in the
year.
5) Fix yday formula when Sunday requested and the week started from Monday.
6) Fail with impossible yday for incomplete week (week 0) and direct %w/%u
request.
7) Shift yday/wday to the first day of the year, if incomplete week
(week 0) requested and no %w/%u used.
MFC after: 7 days
So that reinitialization, e.g. MTU change, will not fail when the system
memory is excessively fragmented.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7961
The assumption that the channel is only opened upon synthetic device
attach time no longer holds, e.g. Hyper-V network device MTU changes.
We have to allow device drivers to preallocate bufrings, e.g. in
attach DEVMETHOD, to prevent bufring allocation failure once the
system memory is fragmented after running for a while.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7960
SPI-mapped MSI interrupts coming from a controller other
than GICv2m need to have their trigger and polarity
properly configured. This patch fixes MSI/MSI-X
on Annapurna Alpine platform with GICv2.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: skra, wma
Differential Revision: https://reviews.freebsd.org/D7698
PIC_SETUP_INTR implementation in GICv3 did not allow
for setting up interrupts without included FDT
description. GICv2m-like MSI interrupts, which map
MSI messages to SPI interrupt lines, may not have
a description in FDT. Add support for such interrupts
by setting the trigger and polarity to the appropriate
values for MSI (edge, high) and get the hardware
IRQ number from the corresponding ISRC.
Obtained from: Semihalf
Submitted by: Michal Stanek <mst@semihalf.com>
Sponsored by: Annapurna Labs
Reviewed by: wma
Differential Revision: https://reviews.freebsd.org/D7662
There is nothing CPU specific here, and it's usable by both fdt and Open
Firmware based systems. Rather than keeping the same file in every one, just
add it to the ofw/fdt block in the main file.
Summary:
If the environment variable is set, U-boot adds a 'bootargs' property to
/chosen. This is already handled by ARM and MIPS, but should be handled in a
central location. For now, ofw_subr.c is a good place until we determine if it
should be moved to init_main.c, or somewhere more central to all architectures.
Eventually arm and mips should be modified to use ofw_parse_bootargs() as well,
rather than using the duplicate code already.
Reviewed By: adrian
Differential Revision: https://reviews.freebsd.org/D7846
Closing stdin/stdout/stderr is often a bad idea as a future open()
can end up with its fd. Leave it open and limit it to no rights
instead.
Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D7984
By adding it to the option priorities table.
PR: 184117
Submitted by: Lowell Gilbert <freebsd-bugs-local at be-well.ilk.org>
Reported by: Tomek CEDRO <cederom at tlen.pl>
Reviewed by: jhb
Differential Revision: https://reviews.freebsd.org/D7911
keep the beaglebone defaults: USB0 -> peripheral/gadget, USB1 -> host.
This is only a workaround as in fact fact this hardware is capable of detect
the USB port mode based on type of cable and act according with the detected
mode. Unfortunately the driver does not handle that at moment.
MFC after: 3 days
Sponsored by: Rubicon Communications, LLC (Netgate)
100.chksetuid and 110.neggrpperm try to search through all UFS and ZFS
filesystems. But their logic contains an error. They also search through
remote filesystems that are mounted on top of the root of a local
filesystem. For example, if a user installs a FreeBSD system with the
default ZFS layout, he'll get a zroot/usr/home filesystem. If he then mounts
/usr/home over NFS, these scripts would search through /usr/home.
MFC after: 4 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D7482
This is in preparation for linking with LLVM's lld, which does not have
a compiled-in default output emulation. lld requires that it is
specified via the -m option, or obtained from the object file(s) being
linked.
This will also allow all build targets to share a common linker binary.
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D7837
Use mdmfs/mdconfig instead of vndconfig/newfs. vndconfig doesn't exist on FreeBSD.
TODO: need to parameterize out the md(4) device as it's currently hardcoded to "3"
(in both the FreeBSD and NetBSD cases).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
The `mknod <file> p` command doesn't exist on FreeBSD, like on NetBSD. Use
mkfifo instead to create named pipes (FIFOs).
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Similar to r306030, use a simpler method for getting the value of
`hw.pagesize`, i.e. `sysctl -n hw.pagesize`. The awk filtering method doesn't
work on FreeBSD
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Use kldstat -m to determine whether or not a filesystem is loaded. This works
well with tmpfs, ufs, and zfs
MFC after: 1 month
Sponsored by: Dell EMC Isilon
Use a simpler way of dumping kern.maxvnodes, i.e. `sysctl -n kern.maxvnodes`
The awk filtering method employed in NetBSD doesn't work on FreeBSD
MFC after: 1 month
Sponsored by: Dell EMC Isilon
bspatch previously included sys/capability.h or sys/capsicum.h based
on __FreeBSD_version, as FreeBSD is the upstream for bsdiff and we may
see this file incorporated into other third-party software.
The Capsicum header is now installed as sys/capsicum.h in stable/10 and
FreeBSD 10.3, so we can just use sys/capsicum.h and simplify the logic.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D7954
alpine-hal SerDes file was omitted in the previous commit.
Files added here.
All unnecessary (old) files were also removed.
Merge from vendor-sys, r306017
The g_io_schedule_up() gets its "if" condition swapped to make
it more similar to g_io_schedule_down().
Suggested by: mav@
Reviewed by: mav@
MFC after: 1 month
So that NVS version probing failure does not look too scary.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D7950
