Modules on Marvell SOC can be selectively PM-disabled, and we must not access
disabled devices' registers (attempt to initialize them) unconditionally, as
this leads to the system hang. This patch introduces graceful handling of the
PM state during devices init.
Submitted by: Michal Hajduk
Obtained from: Semihalf
While usually not an issue, this firewalls bugs in the code that may
run us out of memory.
Fix a memory exhaustion in the case where devctl was disabled, but the
link was bouncing. The check to queue was in the wrong place.
Implement a new sysctl hw.bus.devctl_queue to control the depth. Make
compatibility hacks for hw.bus.devctl_disable to ease transition.
Reviewed by: emaste@
Approved by: re@ (kib)
MFC after: asap
- Use a better find invocation to purge empty directories from all the dist
trees during a release build. The previous version did not purge
directories whose contents were all empty directories.
- Explicitly blacklist a few files from the lib32 dist instead of using a
whitelist. A better longterm solution is to fix the few offenders to not
install data files during a lib32 install.
MFC after: 3 days
BIOS-enumerated devices:
- Assume a device is a match if the memory and I/O ports match even if the
IRQ or DRQ is wrong or missing. Some BIOSes don't include an IRQ for
the atrtc device for example.
- Add a hack to better match floppy controller devices. Many BIOSes do not
include the starting port of the floppy controller listed in the hints
(0x3f0) in the resources for the device. So far, however, all the BIOS
variations encountered do include the 'port + 2' resource (0x3f2), so
adjust the matching for "fdc" devices to look for 'port + 2'.
Reviewed by: imp
MFC after: 3 days
and remove from its dependency on LRO, my tests have shown
that its always beneficial, even when doing bridging.
Second, fix up a few problems in the statistics code, the
adapter dependencies had gotten lost so some code that should
only run on 82599 was always running, this resulted in bogus
flow control numbers on 82598.
create stdin and stdout, don't blindly try to use stdin as a bi-directional
channel. Instead, detect the pipe and set up a special exec handler
that indirects write() calls through stdout.
This fixes the problem where ``set device "!ssh -e none host ppp
-direct label"'' no longer works with an openssh-5.2 server side as
that version of openssh ignores the USE_PIPES config setting and
*always* uses pipes (rather than socketpair) for stdin/stdout channels.
MFC after: 3 days
Handle GNU/Linux according to LSB Core Specification 4.0,
Chapter 11. Object Format, 11.8. ABI note tag.
Also check the first word of desc, not only name, according to
glibc abi-tags specification to distinguish between Linux and
kFreeBSD.
Add explicit handling for Debian GNU/kFreeBSD, which runs
on our kernels as well [2].
In {amd64,i386}/trap.c, when checking osrel of the current process,
also check the ABI to not change the signal behaviour for Linux
binary processes, now that we save an osrel version for all three
from the lists above in struct proc [2].
These changes make it possible to run FreeBSD, Debian GNU/kFreeBSD
and Linux binaries on the same machine again for at least i386 and
amd64, and no longer break kFreeBSD which was detected as GNU(/Linux).
PR: kern/135468
Submitted by: dchagin [1] (initial patch)
Suggested by: kib [2]
Tested by: Petr Salinger (Petr.Salinger seznam.cz) for kFreeBSD
Reviewed by: kib
MFC after: 3 days
- Add linprocfs and linsysfs to the linuxulator dox.
- Take the generated includes from the .m files from a subdirectory
instead of putting everything into $(.OBJDIR). This imporves the
human readbility of the source directory contents a lot, if you do not
create a separate OBJDIR.
- Assume UTF-8 encoding for every input file.
- Strip the source and dest path from the output, we are not interested
in the absolute location on the machine where the docs are created,
relative the the root of the FreeBSD source is what interests us.
- Exclude .svn directories.
- Switch to alphabetic index.
- Use one line per INCLUDE_PATH member in the common dox-config.
- Bump the __FreeBSD__ version to 9. [MFC: to 8]
- Switch from hardcoded .m files to an run-time generated one. Takes
a little bit more time to get started with actual work, but at least
is more future-proof. If you generate dox for all subsystems, the
time to find all .m files in the source is magnitutes lower than
producing the docs.
- Make the *DEST_PATH overidable from the environment. This allows to
produce the output directly in the docroot of a webserver.
- Fix the path when telling the user where he can find the API docs.
MFC after: 1 month (after 8.0)
When I wrote the pseudo-terminal driver for the MPSAFE TTY code, Robert
Watson and I agreed the best way to implement this, would be to let
posix_openpt() create a pseudo-terminal with proper permissions in place
and let grantpt() and unlockpt() be no-ops.
This isn't valid behaviour when looking at the spec. Because I thought
it was an elegant solution, I filed a bug report at the Austin Group
about this. In their last teleconference, they agreed on this subject.
This means that future revisions of POSIX may allow grantpt() and
unlockpt() to be no-ops if an open() on /dev/ptmx (if the implementation
has such a device) and posix_openpt() already do the right thing.
I'd rather put this in the manpage, because simply mentioning we don't
comply to any standard makes it look worse than it is. Right now we
don't, but at least we took care of it.
Approved by: re (kib)
MFC after: 3 days
1) When calculating the table offset for sliding the sack
array, the two byte values must be "ored" together in order
for us to do the correct sliding of the arrays.
2) We were NOT properly doing CC and other changes to things only
NR-Sacked. The solution here is to make a separate function that
will actually do both CC/updates and free things if its NR sack'd.
This actually shrinks out common code from three places (much better).
MFC after: 3 days
Say, a driver wants to have multiple console devices to pick from, you
would normally write down something like this:
CONSOLE_DRIVER(dev1);
CONSOLE_DRIVER(dev2);
Unfortunately, this means that you have to declare 10 cn routines,
instead of 5. It also isn't possible to initialize cn_arg on beforehand.
I noticed this restriction when I was implementing some of the console
bits for my vt(4) driver in my newcons branch. I have a single set of cn
routines (termcn_*) which are shared by all vt(4) console devices.
In order to solve this, I'm adding a separate consdev_ops structure,
which contains all the function pointers. This structure is referenced
through consdev's cn_ops field.
While there, I'm removing CONS_DRIVER() and cn_checkc, which have been
deprecated for years. They weren't used throughout the source, until the
Xen console driver showed up. CONSOLE_DRIVER() has been changed to do
the right thing. It now declares both the consdev and consdev_ops
structure and ties them together. In other words: this change doesn't
change the KPI for drivers that used the regular way of declaring
console devices.
If drivers want to use multiple console devices, they can do this as
follows:
static const struct consdev_ops mydriver_cnops = {
.cn_probe = mydriver_cnprobe,
...
};
static struct mydriver_softc cons0_softc = {
...
};
CONSOLE_DEVICE(cons0, mydriver_cnops, &cons0_softc);
static struct mydriver_softc cons1_softc = {
...
};
CONSOLE_DEVICE(cons1, mydriver_cnops, &cons1_softc);
Obtained from: //depot/user/ed/newcons/...
leaves behind an orphaned vnet. This change ensures that such vnets get
released.
This change affects only options VIMAGE builds.
Submitted by: jamie
Discussed with: bz
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
has ifaddresses of AF_LINK type which thus have an embedded
if_index "backpointer", we must update that if_index backpointer
to reflect the new if_index that our ifnet just got assigned.
This change affects only options VIMAGE builds.
Submitted by: bz
Reviewed by: bz
Approved by: re (rwatson), julian (mentor)
context inside the RPC code.
Temporarily set td's cred to mount's cred before calling socreate() via
__rpc_nconf2socket().
Submitted by: rmacklem (in part)
Reviewed by: rmacklem, rwatson
Discussed with: dfr, bz
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
from the existing modevent / MOD_UNLOAD handler, and register div_destroy()
in protosw as per-vnet .pr_destroy() handler for options VIMAGE builds. In
nooptions VIMAGE builds, div_destroy() will be invoked from the modevent
handler, resulting in effectively identical operation as it was prior this
change. div_destroy() also tears down hashtables used by ipdivert, which
were previously left behind on ipdivert kldunloads.
For options VIMAGE builds only, temporarily disable kldunloading of ipdivert,
because without introducing additional locking logic it is impossible to
atomically check whether all ipdivert instances in all vnets are idle, and
proceed with cleanup without opening a race window for a vnet to open an
ipdivert socket while ipdivert tear-down is in progress.
While here, staticize div_init(), because it is not used outside of
ip_divert.c.
In cooperation with: julian
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
pf_proto_register(), iterate over all existing vnets to call protosw_init()
and thus the appropriate .pr_init() handler in the context of each vnet.
NB in the future we probably want to separate pr_init() handlers into
two, i.e. per-vnet and global, functions.
This change has no impact on nooptions VIMAGE builds.
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
In preparation for Unicode support for the keyboard layer, we'd better
get rid of all the hardcoded 0x100/0xff constants in kbdcontrol.
Instead, add a flag called SPECIAL stored in the top bit of the integer.
Adding Unicode support is very simple now; just change u_char map[] to
u_int map[] in keyent_t, change the bounds checking in kbdcontrol to
0x1FFFFF and modify the ioctls to allow loading these new keymaps.
- Use CONSOLE_DRIVER() instead of the deprecated CONS_DRIVER() declaration.
- This means we cannot use cn_checkc anymore, which is supposed to do
the same as cn_getc nowadays. Remove the cn_getc implementation (that
was never being called) and rename cn_checkc to cn_getc.
- Don't run-time patch cn_putc, but add the logic to xc_cnputc().
This means I could do some cleanups to our console code...
Tested by: nobody on hackers@
being polled.
- Remove the need for Giant from the USB HUB driver.
- Leave device unconfigured instead of disabling the USB port
when Huawei Autoinstall disk detection triggers. This should
fix problems that the Huawei device is not detected after
Autoinstall eject is issued.
- Reported by: Nikolay Antsiferov
- Fix memory use after free race for USB character devices.
- Reported by: Lucius Windschuh
- Factor out the enumeration lock into three functions to make the
coming newbus lock conversion more easy.
- usbd_enum_lock
- usbd_enum_unlock
- usbd_enum_is_locked
Submitted by: hps
enable the ones we want. This has been changed to better
match the ADMtek's reference design to avoid setting the
power-down configuration line of the PHY at the same time
it is reset.
Submitted by: John Hood via hps
direction even if the actual device is opened for read and
write. Fix fflags check so that the UFM and URIO drivers work.
Reported by: Krassimir Slavchev
Submitted by: hps
keys are pressed.
- Reported by: Various people
- add sysctl to disable keyboard led control request
- Reported by: Yoshihiro Ota
- Save system CPU usage: Patch to stop keyboard timer when no
keys are pressed.
Submitted by: hps
MFC after: 3 days
Add a reference count to function definitions.
Memory may leak if multiple SIGINTs arrive in interactive mode,
this will be fixed later by changing SIGINT handling.
PR: bin/137640
ifnet list during if_ef load, directly acquire the ifnet_sxlock
exclusively. That way when if_alloc() recurses the lock, it's a write
recursion rather than a read->write recursion.
This code structure is arguably a bug, so add a comment indicating that
this is the case. Post-8.0, we should fix this, but this commit
resolves panic-on-load for if_ef.
Discussed with: bz, julian
Reported by: phk
MFC after: 3 days
