patm(4) devices.
Maintaining an address family and framework has real costs when we make
infrastructure improvements. In the case of NATM we support no devices
manufactured in the last 20 years and some will not even work in modern
motherboards (some newer devices that patm(4) could be updated to
support apparently exist, but we do not currently have support).
With this change, support remains for some netgraph modules that don't
require NATM support code. It is unclear if all these should remain,
though ng_atmllc certainly stands alone.
Note well: FreeBSD 11 supports NATM and will continue to do so until at
least September 30, 2021. Improvements to the code in FreeBSD 11 are
certainly welcome.
Reviewed by: philip
Approved by: harti
The NFSv4 RFCs give a server the option of allowing the use of an open
stateid for write access to be used for a Read operation.
This patch enables this by default and adds a sysctl to disable it,
for anyone who does not want this capability.
Allowing this is particularily useful for a pNFS Data Server (DS), since
they are not permitted to allow the use of special stateids.
Discovered during recent testing of the pNFS server under development.
MFC after: 2 weeks
usr.bin/diff/diffreg.c: In function 'change':
usr.bin/diff/diffreg.c:1085: warning: 'i' may be used uninitialized in this function
This version of gcc is not smart enough to see that 'i' cannot actually
be used unitialized. However, the variable is confusingly re-used, so
it is better to give it another name, and clearly initialize it before
attempting to use it.
Reviewed by: bapt
Differential Revision: https://reviews.freebsd.org/D10484
BHND_EROM_DUMP() method.
Dump the EROM tables to the coneole on mips/broadcom devices if bootverbose
is enabled; this functionality is primarily useful when debugging SoC EROM
parsing and device matching issues during early boot.
Reviewed by: mizhka
Approved by: adrian (mentor)
Sponsored by: Plausible Labs
Differential Revision: https://reviews.freebsd.org/D10122
in the file by adding the global (g) option at the end. Without it, only the
first match is replaced, subsequent ones are ignored. The intention of the
example is to demonstrate something else, but adding the g matches the example
to what the description says.
Discussed with: brd (on IRC)
MFC after: 1 week
The internal array size goes through a loop and is compared with numitems
which at its limits makes can be unreachably higher than arraysz.
Prevent an hypothetical overflow by matching the types.
MFC after: 1 week
kernel calls this directly so the event handler is not called, meaning
the computer fails to reboot.
Tested by: cognet
MFC after: 1 week
Sponsored by: DARPA, AFRL
Hyper-V hot channel effect:
Operation latency on hot channel is only _half_ of the operation
latency on cold channels.
This commit takes the advantage of the above Hyper-V host channel
effect, and can reduce more than 75% latency and more than 50%
latency stdev, i.e. lower and more stable/predictable latency,
for various types of web server workloads.
MFC after: 3 days
Sponsored by: Microsoft
This patch sets the default uid/gid values for "nobody" and "nogroup"
to the values in the password and group databases. Normally nfsuserd(8)
will override these with whatever is in the password/group databases,
so these values are only used when the databases entries aren't available.
It would be nice to use the definitions in sys/conf.h, but those are
in the _KERNEL section of the file.
Reported by: tez@pkgsrc.org
Submitted by: tez@pkgsrc.org
MFC after: 2 weeks
Taking some hints from the regex variant in nvi(1) and higher-level
compiler warnings, update some types in our regex(3) implementation.
Joint work with: Kyle Evans
MFC after: 2 weeks
An NFSv4 server has the option of allowing a Read to be done using a Write
Open. If this is not allowed, the server will return NFSERR_OPENMODE.
This patch attempts the read with a write open and then disables this
if the server replies NFSERR_OPENMODE.
This change will avoid some uses of the special stateids. This will be
useful for pNFS/DS Reads, since they cannot use special stateids.
It will also be useful for any NFSv4 server that does not support reading
via the special stateids. It has been tested against both types of NFSv4 server.
MFC after: 2 weeks
The NFSv4.1/pNFS client does not use/need a backchannel for the Data Server (DS)
sessions, so the flag should only be set for MetaData Server (MDS) sessions.
This patch should have been a part of r317275.
MFC after: 2 weeks
colors.
Colors are still hard-coded as 15 (normally lightwhite) for the interior
and 0 (normally black) for the border, but these are now values used in
2 expressions instead of built in to the algorithm. The algorithm used
a fancy and/or method, but this gives no control over the colors except
and'ing all color planes off gives black and or'ing all color planes on
gives lightwhite. Just draw the border and interior in separate colors
using the same method as for characters, including its complications to
optimize for VGA adaptors. Optimization is not really needed here, but
for the VGA case it avoids being slower than the and/or method. The
optimization is worth about 30%.
If the commands had failed previously, it would press on and result in a
series of cascading failures. Fail early and continue on to the next case
instead of executing additional commands after a previously failed series
of steps.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
- Make the logfile for $out be built off the basename for $cmd, instead of $cmd.
(r317292 broke this assumption).
- Rename $mntpt to $mntpt_prefix for clarity, as this variable is a prefix for
mountpoints.
- Reindent the umount directive block while here to match the rest of the code.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
The `remove` verb hasn't been present in geom_part*(4) for well
over a decade, if ever. I couldn't find any references to it in
^/stable/5 at least, which is around the timeframe that this test
was written.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
- Declare $count with the `my` scope operator to permit `use strict`.
- Add `use strict`.
- Use `use warnings` instead of using `-w` in the shebang.
- Don't unlink $cmd when done (prevents unnecessary rebuilding).
- Improve the error message when running with insufficient permissions, e.g.,
non-root.
MFC after: 5 weeks
Sponsored by: Dell EMC Isilon
The "return layout on close" case in the pNFS client was badly broken.
Fortunately, extant pNFS servers that I have tested against do not
do this. This patch fixes it. It also changes the way the layout stateid.seqid
is set for LayoutReturn. I think this change is correct w.r.t. the RFC,
but I am not 100% sure.
This was found during recent testing of the pNFS server under development.
MFC after: 2 weeks
The test suite currently lacks basic sanity checks to ensure that egrep,
fgrep, and grep are actually matching the right expression types, i.e. passing
the right flags to regcomp(3). Amend the test suite to make sure that not only
are the individual versions doing the right thing, but also that we don't have some
kind of frankenregex situation happening where egrep is accepting a BRE or
grep an ERE.
I've chosen to not expand the 'basic' test but to add the 'grep_sanity' checks
to their own test case since this is testing for more than just 'grep matches things',
but actual expression types.
Differential Revision: D10444
Reviewed by: emaste, ngie
Submitted by: Kyle Evans <kevans91@ksu.edu>
Tested with: bsdgrep, gnu grep (base, ports)
Sponsored by: Dell EMC Isilon
They're no longer needed after recent fixes made to bsdgrep(1).
Submitted by: Kyle Evans <kevans91@ksu.edu> (via a previous diff in D10433)
Sponsored by: Dell EMC Isilon
The NFSv4.1/pNFS client wasn't doing a newnfs_disconnect() call for the
connection to the Data Server (DS) under some circumstances. The main
effect of this was a leak of malloc'd structures in the krpc. This patch
adds the newnfs_disconnect() calls to fix this.
Detected during recent testing against the pNFS server under development.
MFC after: 2 weeks
