Commit Graph

47342 Commits

Author SHA1 Message Date
Duncan Barclay
5cda0b02eb Most of this commit are minor changes whilst trying to make the driver
robust enough to work with dhcp. Essentially the driver returns to userland
before certain commands have been completed by the card. I'm trying to
work out the best way to fix this. There are very minor functional changes,
most of this is debugging.

Rework of debugging so a bit mask is used and re-allocation around the place.

Tried to protect ray_init with a tsleep until the network has been joined. I think this is only a partial fix as we also update the mcast and promisc
values.
2000-04-09 21:07:43 +00:00
Archie Cobbs
807a5caa14 Add ng_mppc(8) netgraph node as a KLD module.
Obtained from:  Whistle source tree
2000-04-09 21:07:39 +00:00
Archie Cobbs
af7ab18437 A netgraph node that implements Microsoft Point-to-Point compression
(MPPC) and Microsoft Point-to-Point encryption (MPPE) protocols.

Note: the MPPC part is disabled as it requires proprietary files.

Obtained from:	Whistle source tree
2000-04-09 21:04:55 +00:00
Archie Cobbs
018204af68 A simplified RC4 implementation for kernel use. 2000-04-09 21:01:01 +00:00
Archie Cobbs
3a83eefb2a Fix bogus const-ness in declaration of sha1_loop(). 2000-04-09 20:10:55 +00:00
Archie Cobbs
2d6fdfda46 Document EWOULDBLOCK as a possible errno return value. 2000-04-09 19:10:57 +00:00
Brian Somers
9bf01bcb6c Add a missing ``break'' 2000-04-09 18:27:08 +00:00
Søren Schmidt
4175758a2d Add support for ATA66 on newer revisions of the VIA 82C596 2000-04-09 15:08:27 +00:00
Jordan K. Hubbard
4fbd258bcc Nuke duplicate struct declaration from somebody's paste-o 2000-04-08 22:50:18 +00:00
Warner Losh
d85d39f7d1 Re-enable probe for isa and correct the plug and play issue that
caused this device to be disabled.  It will no longer claim all
devices with PNPBIOS enabled.
2000-04-08 17:23:46 +00:00
Warner Losh
0491a49ae7 Don't complain about not getting resources for the compatibility shim
drivers unless booted -verbose.  This cleans up the boot messages
somewhat as the old messages were confusing and not helpful for most
people.
2000-04-08 17:21:15 +00:00
Warner Losh
9a8631b340 Add support for compiling kernel modules outside of the tree. If you
do not have the kernel you wish to compile against in either
/usr/src/sys or /sys, then you will need to set SYSDIR to point to the
sys directory of the source tree that contians the source.

Also, minor tweaks to the load/unload targets from Bruce.

I've had this through several make worlds, as well as using it on a
daily basis for the past couple of weeks to build modules needed for
testing at Timing Solutions.

Reviewed and revised by: bde
Work sponsored by: Timing Solutions
2000-04-08 17:20:00 +00:00
John Hay
49ce7a6052 Make the N2 isa cards probe again. Remove the unused frame relay hooks.
This should also fix PR 17814 where flags were ignored on the first
usage of ifconfig on the interface.

PR:		17814
2000-04-08 17:14:00 +00:00
Nick Hibma
de9e4dd6e4 Update the urio driver. It now works on NetBSD and OpenBSD as well.
Update the license in the rio_usb.h (now rio500_usb.h) to not be GPL.
Sorry for committing that file in the first place. The change of license
was agreed to by the original author.
2000-04-08 17:02:13 +00:00
Doug Rabson
c0de587901 Use makeobjops.pl instead of makedevops.pl. 2000-04-08 15:31:28 +00:00
Doug Rabson
f7b7769172 * Factor out the object system from new-bus so that it can be used by
non-device code.
* Re-implement the method dispatch to improve efficiency. The new system
  takes about 40ns for a method dispatch on a 300Mhz PII which is only
  10ns slower than a direct function call on the same hardware.

This changes the new-bus ABI slightly so make sure you re-compile any
driver modules which you use.
2000-04-08 14:17:18 +00:00
Doug Rabson
c685012659 Add manpage for kernel object system. 2000-04-08 13:24:40 +00:00
Mitsuru IWASAKI
83471a4c3c Add restart capability by SIGHUP. On restart, working configuration
(resource and card configuration being used) is to be maintained for
consistency.  Part of resource pool re-initialization would be rewrite
later using on Warner-san's hints driver API :-)

Reviewed by:    nate, imp and -nomads ML in Japan.
Obtained from:  http://www.freebsd.org/~iwasaki/pccard/pccardd-signal.diff
Commited at:    BSD HANAMI Party 2000 in Japan
2000-04-08 05:19:44 +00:00
Kazutaka YOKOTA
127d54ba62 Follow up to the 3 button emulation update in rev 1.41:
- Fix the -z option which I broke in rev 1.41.  It didn't work
  correctly when used in conjunction with the -m option.
- Tweak the 3 button state machine so that 'Up' events of the buttons
  1 and 3 are reported immediately as soon as the buttons are up.
2000-04-08 04:51:09 +00:00
Murray Stokely
c79f6ff977 More error checking and idiot-proofing for the user editor.
PR:		14318
Approved by:	jkh
2000-04-08 03:08:12 +00:00
Murray Stokely
471d7061ad PR: 17559
Approved by:	jkh

  You can't enable 'emulate 3 button' option for moused in sysinstall.
This adds a menu option to set moused_flags and the help text explains
that entering "-3" will enable this feature.
2000-04-08 03:04:32 +00:00
Paul Saab
d8af287caf Make PXE use the UDP API. This allows for both TFTP and NFS support.
You may specify TFTP or NFS via compile time options in the loader,
but not both at this time.

Also, remove a warning about not knowing how to boot from network
devices.  We can obviously do that now.
2000-04-08 01:22:14 +00:00
Paul Saab
b1875374d3 Break out sendudp and readudp from net.c. This is for PXE, so it
can use its own UDP interface.
2000-04-08 01:18:04 +00:00
Brian Somers
b44dfc0d29 Don't use ``grep | sed'' in the example for INCLUDE_CONFIG_FILE
when sed can do both.
2000-04-08 00:02:53 +00:00
Brian Somers
b42135dee3 When running ppp -background, show comfort messages showing
when we're redialing/reconnecting.

While we're here, log redial, reconnect and phone number
announcements to LogCHAT, and reduce some other logging to
LogDEBUG.
2000-04-07 23:46:14 +00:00
Yoshihiro Takahashi
249253e7a0 Newbusify amd driver.
Some error messages are added by Brian Somers <brian@Awfulhak.org>.
2000-04-07 11:36:11 +00:00
Yoshihiro Takahashi
4b00895121 Newbusify adv driver.
Reviewed by:	imp
2000-04-07 11:32:42 +00:00
Matthew N. Dodd
833d4d91bc Use correct offset into register window.
Noticed by: 	Manfred Antar <mantar@pacbell.net>
2000-04-07 07:29:31 +00:00
Matthew N. Dodd
bfae5e3a16 - Convert dpt_pci.c to newbus.
- Add support for ISA based DPT adapters (this doesn't quite work yet).
- Sync dpt_eisa.c with my local copy.
  - Simplify how EISA IDs are matched.
  - Prototype.
  - Formatting nits.
  - Conform to how I do things in dpt_pci.c/dpt_isa.c.
- Modify dpt_scsi.c:dpt_alloc() to DTRT with newbus.
- Add some comments to dpt_scsi.c:dpt_pio_get_conf().
- Add additional check to dpt_scsi.c:dpt_get_conf().
- Add some useful error messages to dpt_scsi.c:dpt_init().
2000-04-07 02:50:24 +00:00
Jonathan Lemon
9c117130a5 If we can't allocate an IRQ resource, fail in the attach routine. 2000-04-07 00:09:24 +00:00
Wilko Bulte
23d434bead Update DS10 description, add info on DS10L "Slate" 2000-04-06 18:10:45 +00:00
Ruslan Ermilov
67b333b7e4 - Add support for FTP EPRT (RFC 2428) command.
- Minor optimizations.
- Minor spelling fixes.

PR:		14305
Submitted by:	ume
Rewritten by:	ru
2000-04-06 15:54:52 +00:00
Sheldon Hearn
39e0dbd5fb Add a step for showing changes in the way filesystems are mounted
today from the way they were mounted yesterday.

PR:		17155
Submitted by:	"Crist J. Clark" <cjc@cc942873-a.ewndsr1.nj.home.com>
2000-04-06 10:46:50 +00:00
Nick Hibma
cd37c0cba9 Regen. 2000-04-06 10:19:16 +00:00
Nick Hibma
5deaecf7cf Add Zip 250 2000-04-06 10:16:24 +00:00
Brian Somers
c8f30703cd I didn't get this right the last time....
When an NCP reaches TLF, *ONLY* datalink_Close() links that are
in DATALINK_OPEN.

When the last link reaches TLD, DOWN all NCPs (as we used to in the
links TLF (which was the wrong place anyway)), as the NCPs aren't
now going to datalink_Close() us unexpectedly, we get to continue
doing what we were told to do in the first place.

The result:  When we lose a link, the IPCP layer goes down and
we actually call the stuff in ppp.linkdown !
2000-04-06 10:03:48 +00:00
Satoshi Asami
3f17d264cd Convert "RELENG_ver_RELEASE" to "RELEASE_ver" and use it to check out
the ports and doc trees.  There is no change if we are not building a
release (i.e., we are not using a tag of the form RELENG_ver_RELEASE
--e.g., a RELENG_ver tag used to build a snapshot).

This should allow the ports and doc freezes during the release cycles
to be somewhat shorter, as commits to those (non-branched) trees can
resume as soon as the tags are laid down.

Reviewed by:	nik
Approved by:	jkh
2000-04-06 10:00:20 +00:00
David E. O'Brien
6dcccc6b20 Sparc64 configure section.
Submitted by:	steve
2000-04-06 09:27:38 +00:00
Peter Wemm
6097b91867 Finally cvs rm these two files; they were not referenced in conf/files*,
and were accumulating history as a result of recursive script processing.
2000-04-06 08:18:30 +00:00
Ruslan Ermilov
3021afb53e The idea always was that `make copies' should undo the
`make symlinks' job, but it got broken in rev 1.109.

Restore the correct behaviour.
2000-04-06 07:33:29 +00:00
Greg Lehey
409875e46d open_drive: Add kludges for vn and md.
Submitted-by:	dillon (vn)
Requested-by:	phk (md)
2000-04-06 07:25:35 +00:00
Greg Lehey
6165ec2aad (finally!) add keywords raid4 and partition. 2000-04-06 07:13:44 +00:00
Boris Popov
8fc40832d5 Uncomment ETHER_II frame and remove BPF related variable. 2000-04-06 03:09:56 +00:00
Greg Lehey
bd131be7d1 complete_rqe: Remove a race condition in RAID-4 and RAID-5 where a
request could be deallocated before the top half had finished
	issuing it.  The problem seems only to happen with IDE drives
	and vn devices, but theoretically it could happen with any
	drive.  This is the most important part of a possible series
	of fixes designed to remove race conditions without locking
	out interrupts for longer than absolutely necessary.

Reported-by:	       sos
Fix-supplied-by:       dillon
2000-04-06 03:03:31 +00:00
Warner Losh
2eb1626e61 Two changes:
1) Move an cards to after aic, since an sorts after aic.
	2) Add awi cards for the new awi drivers. This is a wireless pcmcia
	   card.
2000-04-06 02:54:35 +00:00
Warner Losh
0d5c223da4 Awi driver, ported from NetBSD from Atsushi Once-san.
From the README:
	Any IEEE 802.11 cards use AMD Am79C930 and Harris (Intersil) Chipset
	with PCnetMobile firmware by AMD.
	   BayStack 650   1Mbps Frequency Hopping PCCARD adapter
	   BayStack 660   2Mbps Direct Sequence PCCARD adapter
	   Icom SL-200    2Mbps Direct Sequence PCCARD adapter
	   Melco WLI-PCM  2Mbps Direct Sequence PCCARD adapter
	   NEL SSMagic    2Mbps Direct Sequence PCCARD adapter
	   Netwave AirSurfer Plus
			  1Mbps Frequency Hopping PCCARD adapter
	   Netwave AirSurfer Pro
			  2Mbps Direct Sequence PCCARD adapter

Known Problems:
	WEP is not supported.
	Does not create IBSS itself.
	Cannot configure the following on FreeBSD:
		selection of infrastructure/adhoc mode
		ESSID
		...

Submitted by: Atsushi Onoe <onoe@sm.sony.co.jp>
2000-04-06 02:48:48 +00:00
Murray Stokely
f092a22bbd Fixed minor annoyance with sysinstall being redundant / braindead in
the network -> interfaces menu.

Approved by:	jkh
2000-04-06 01:23:21 +00:00
Yoshinobu Inoue
808a8f89a1 Removed unnecessary comma in stf addr printf in hex format,
which I mysteriously added.

Submitted by: ume
2000-04-06 00:24:52 +00:00
Jim Mock
76f62d0c9d Add a new fortune and remove an email address.
Reviewed by:	jkh
2000-04-05 18:44:02 +00:00
Mitsuru IWASAKI
1ea7ed21c8 MFPAO: support wildcard entry for generic serial and fixed
disk as fallthrough entry.

Submitted by:	MIHIRA Sanpei Yoshiro <sanpei@sanpei.org>, iwasaki
Reviewed by:	imp, -mobile ML and nomads ML in Japan
Obtained from:	http://www.freebsd.org/~iwasaki/pccard/pccardd-generic.diff
		http://home.jp.freebsd.org/~sanpei/4-current/usr.sbin-pccard-pccardd.diff
2000-04-05 18:39:21 +00:00