Add a test for bug 191427 where pw(8) will go into an infinite loop
Add some tests for modifying groups
When a group is renamed then the group has been invalidated for sure.
In that case get the group information using the new name.
Fix a regression in pw usermod -G list
The user was perperly adding the to different groups from "list" but was not
removed from the other groups it could have belong to.
Do not delete the group wheel when bad argument is passed to pw groupdel -g
Check that the -g argument is actually a number, if not report an error.
This argument is converted without checking with atoi(3) later so without this
check it converts any alpha entries into 0 meaning it deletes the group wheel
Ensure pw userdel -u <invalid> do not try to remove root
Check the uid passed is actually a number as early as possible
Fix renaming a group via the gr_copy function
Add a regression test to pw(8) because the bug was discovered via using:
pw groupmod
PR: 193704 [1], 185666 [2], 90114 [3], 187189 [4]
Submitted by: Marc de la Gueronniere [4]
Reported by: az [1], sub.mesa@gmail.com [2], bkoenig@cs.tu-berlin.de [3],
mcdouga9@egr.msu.edu [4]
Improve transmit sending offload, TSO, algorithm in general. This
change allows all HCAs from Mellanox Technologies to function properly
when TSO is enabled. See r271946 and r272595 for more details about
this commit.
Sponsored by: Mellanox Technologies
Make SERIAL support optional again. Enable it for i386 because a huge
percentage of machines has a 16550. Disable it for pc98 since only a
tiny fraction of them have one.
Original commit message was
Allow the vfs.nfsd knobs to be set from loader.conf (or using
kenv(8)). This is useful when nfsd is loaded as module.
As I understand, automatic fetch from kenv does not work in stable/10.
Merge the change still, to reduce code difference.
Clarify the documentation of pmcstat:
the -d argument should be passed before -p, -s, -P or -S to be taken in account
Differential Revision: https://reviews.freebsd.org/D1011
Reviewed by: adrian, gnn
Implement better handling for ENOSPC error for both CTL and CAM.
This makes VMWare VAAI Thin Provisioning Stun primitive activate, pausing
the virtual machine, when backing storage (ZFS pool) is getting overflowed.
Rework the EXAMPLES section to be a bit clearer.
- Add an example of using etcupdate diff.
- Create a subsection on bootstrapping that is below the simple
examples. This should make it clearer that 'etcupdate extract' is
a one-time operation and not part of the common workflow. It also
adds more suggestions on when bootstrapping is needed and additional
steps to make future merges simpler.
Clarify that pthread_cleanup_push()/pop() are implemented as macros that
create a new code block and thus must be balanced at the same lexical
scope. (This is also a requirement in POSIX.)
PR: 194280
Submitted by: dr2867.business@pacbell.net
Add ${name}_env and ${name}_prepend. ${name}_env is an argument list which
will be passed to env(1). ${name}_prepend is simply prepended to the command
line for $command.
Add a tunable for arc_shrink_shift (vfs.zfs.arc_shrink_shift) that
controls how much fraction, 1/2^arc_shrink_shift, should be reclaimed
when there is memory pressure.
Submitted by: Richard Kojedzinszky <krichy at tvnetwork.hu>
This includes support for:
- Read-Write Error Recovery mode page;
- Informational Exceptions Control mode page;
- Logical Block Provisioning mode page;
- LOG SENSE command.
No real Informational Exceptions features yet. This is only a placeholder.
Use REPORT LUNS command for SPC-2 devices with LUN 0 disconnected.
SPC-2 tells REPORT LUNS shall be supported by devices supporting LUNs other
then LUN 0. If we see LUN 0 disconnected, guess there may be others, and
so REPORT LUNS shall be supported.
Previous logic was not differentiating disconnected LUNs and absent targets.
That made it to stop scan if LUN 0 was not found for any reason. That made
problematic, for example, using iSCSI targets declaring SPC-2 compliance and
having no LUN 0 configured.
The new logic continues sequential LUN scan if:
-- we have more configured LUNs that need recheck;
-- this LUN is connected and its SCSI version allows more LUNs;
-- this LUN is disconnected, its SCSI version allows more LUNs and we
guess they may be connected (we haven't scanned first 8 LUNs yet or
kern.cam.cam_srch_hi sysctl is set to scan more).
Fix a clang 3.5 warning about abs(3) being given an argument of type
quad_t in setusercontext(). While here, sanitize the clamping of the
priority value, and use the correct type for the return value of
login_getcapnum().
Reviewed by: kib
To restore the default font using vidcontrol(1), use the "-f" flag
without an argument:
vidcontrol -f < /dev/ttyv0
PR: 193910
Differential Revision: https://reviews.freebsd.org/D971
Submitted by: Marcin Cieslak <saper@saper.info>
Reviewed by: ray@, emaste@
Approved by: ray@
MFC of: r273544
- Add a second Huawei SCSI eject command as USB mode switch config files
sometimes use one or the other. Maybe newer Huawei modems switched.
- Return USB_ERR_INVAL if the eject method is not known.
PR: 145319
Add two sysctl(8) to enable/disable NFSv4 server to check when setting
user nobody and/or setting group nogroup as owner of a file or directory.
Usually at the client side, if there is an username that is not in the
client's passwd database, some clients will send 'nobody@<your.dns.domain>'
in the wire and the NFSv4 server will treat it as an ERROR.
However, if you have a valid user nobody in your passwd database,
the NFSv4 server will treat it as a NFSERR_BADOWNER as its believes the
client doesn't has the username mapped.
Submitted by: Loic Blot <loic.blot@unix-experience.fr>
Reviewed by: rmacklem
Approved by: rmacklem
Sponsored by: QNAP Systems Inc.
When tunneling interface is going to insert mbuf into netisr queue after stripping
outer header, consider it as new packet and clear the protocols flags.
This fixes problems when IPSEC traffic goes through various tunnels and router
doesn't send ICMP/ICMPv6 errors.
PR: 174602
Sponsored by: Yandex LLC
The SYSCTL data pointers can come from userspace and must not be
directly accessed. Although this will work on some platforms, it can
throw an exception if the pointer is invalid and then panic the kernel.
Add a missing SYSCTL_IN() of "SCTP_BASE_STATS" structure.
Sponsored by: Mellanox Technologies
strict POSIX mode.
Put the htonl(), htons(), ntohl() and ntohs() declarations under
__POSIX_VISIBLE >= 200112. POSIX.1-2001 and newer require these to be
exposed from <netinet/in.h> (as well as <arpa/inet.h>).
Note that it may be unnecessary to check __POSIX_VISIBLE >= 200112 because
older versions of POSIX and the C standard do not define this header.
However, other places in the same file already perform the check.
PR: 188316
Submitted by: Christian Neukirchen
Also, remove #if __BSD_VISIBLE where it is redundant. When __BSD_VISIBLE is
defined to 1, __POSIX_VISIBLE, __XSI_VISIBLE and __ISO_C_VISIBLE are also
defined to the newest supported version.
PR: 188173
Implement PLPMTUD blackhole detection (RFC 4821), inspired by code
from xnu sources. If we encounter a network where ICMP is blocked
the Needs Frag indicator may not propagate back to us. Attempt to
downshift the mss once to a preconfigured value.
Note, this is turned off by default.
