copied in from userspace. This fixes instant panic when creating CTL LUN
on sparc64. Not a security problem, since the API is root-only.
Reviewed by: ken
Sponsored by: FreeBSD Foundation
before the TX path is being aborted.
Right now it's in the TDMA code and I can live with that; but it really
should get fixed.
I'll do a more thorough audit of this code soon.
* Don't use BUS_DMA_ALLOCNOW for descriptor DMA maps; we never use
bounce buffers for the descriptors themselves.
* Add some XXX's to mark where the ath_buf has its mbuf ripped from
underneath it without actually cleaning up the dmamap. I haven't
audited those particular code paths to see if the DMA map is guaranteed
to be setup there; I'll do that later.
* Print out a warning if the descdma tidyup code is given some descriptors
w/ maps to free. Ideally the owner will free the mbufs and unmap
the descriptors before freeing the descriptor/ath_buf pairs, but
right now that's not guaranteed to be done.
Reviewed by: scottl (BUS_DMA_ALLOCNOW tag)
extattr_set_{fd,file,link} is logically a write(2)-like operation and
should return ssize_t, just like extattr_get_*. Also, the user-space
utility was using an int for the return value of extattr_get_* and
extattr_list_*, both of which return an ssize_t.
MFC after: 1 week
sys/cam/scsi/scsi_all.c:
- Added scsi_ata_pass_16 method
Which use ATA Pass-Through to send commands to the attached disk.
sys/cam/scsi/scsi_all.h:
- Added defines for all missing ATA Pass-Through commands values.
- Added scsi_ata_pass_16 method.
- Fixed a comment typo while I'm here
Reviewed by: mav
Approved by: pjd (mentor)
MFC after: 2 weeks
only other case where STT_FILE symbols are used, in symit_next() in
cddl/contrib/opensolaris/tools/ctf/cvt/input.c, save the basename of the
symbol, instead of the full pathname.
Reported by: avg
Tested by: avg, jimharris
MFC after: 1 week
the buffer is being freed.
* When buffers are cloned, the original mapping isn't copied but it
wasn't freeing the mapping until later. To be safe, free the
mapping when the buffer is cloned.
* ath_freebuf() now no longer calls the busdma sync/unmap routines.
* ath_tx_freebuf() now calls sync/unmap.
* Call sync first, before calling unmap.
Tested:
* AR5416, STA mode
Words in shell script are separated by spaces or tabs independent of the
value of IFS. The value of IFS is only relevant for the result of
substitutions. Therefore, there should be a space between 'wordexp' and the
words to be expanded, not an IFS character.
Paranoia might dictate that the shell ignore IFS from the environment (even
though our sh currently uses it), so do not depend on it in the new test
case.
The normal RX path (ath_rx_pkt()) will sync and unmap the
buffer before passing it up the stack. We only need to do this
if we're flushing the FIFO during reset/shutdown.
Merge change from illumos:
1368 enablings on defunct providers prevent providers from unregistering
We try to address some underlying differences between the Solaris
and FreeBSD implementations: dtrace_attach() / dtrace_detach() are
currently unimplemented in FreeBSD but the new code from illumos
makes use of taskq so some adaptations were made to dtrace_open()
and dtrace_close() to handle them appropriately.
Illumos Revision: r13430:8e6add739e38
Reference:
https://www.illumos.org/issues/1368
Reviewed by: gnn
Tested by: Fabian Keil
Obtained from: Illumos
MFC after: 3 weeks
It now passes WARNS=7 with clang on i386.
GCC 4.2.1 does not understand setjmp() properly so will always trigger
-Wuninitialized. I will not add the volatile keywords to suppress this.
vnode could be reclaimed while lock upgrade was performed.
Sponsored by: The FreeBSD Foundation
Reported and tested by: pho
Diagnosed and reviewed by: rmacklem
MFC after: 1 week
uart(4) allocates send and receiver buffers in attach() before it calls
the low-level driver's attach routine. Many low-level drivers set the
fifo sizes in their attach routine, which is too late. Other drivers set
them in the probe() routine, so that they're available when uart(4)
allocates buffers. This fixes the ones that were setting the values too
late by moving the code to probe().
Changes to make rtc/cts flow control work...
This does not turn on the builtin hardware flow control on the SoC's usart
device, because that doesn't work on uart1 due to a chip erratum (they
forgot to wire up pin PA21 to RTS0 internally). Instead it uses the
hardware flow control logic where the tty layer calls the driver to assert
and de-assert the flow control lines as needed. This prevents overruns at
the tty layer (app doesn't read fast enough), but does nothing for overruns
at the driver layer (interrupts not serviced fast enough).
To work around the wiring problem with RTS0, the driver reassigns that pin
as a GPIO and controls it manually. It only does so if given permission via
hint.uart.1.use_rts0_workaround=1, to prevent accidentally driving the pin
if uart1 is used without flow control (because something not related to
serial IO could be wired to that pin).
In addition to the RTS0 workaround, driver changes were needed in the area
of reading the current set of DCE signals. A priming read is now done at
attach() time, and the interrupt routine now sets SER_INT_SIGCHG when any
of the DCE signals change. Without these changes, nothing could ever be
transmitted, because the tty layer thought CTS was de-asserted (when in fact
we had just never read the status register, and the hwsig variable was
init'd to CTS de-asserted).
Changes to support bulk high-speed (230kbps and higher) data reception...
Allow the receive fifo size to be tuned with hint.uart.<dev>.fifo_bytes.
For high speed receive, a fifo size of 1024 works well. The default is
still 128 bytes if no hint is provided. Using a value larger than 384
requires a change in dev/uart/uart_core.c to size the intermediate
buffer as MAX(384, 3*sc->sc_rxfifosize).
Recalculate the receive timeout whenever the baud rate changes. At low
baud rates (19.2kbps and below) the timeout is the number of bits in 2
characters. At higher speed it's calculated to be 500 microseconds
worth of bits. The idea is to compromise between being responsive in
interactive situations and not timing out prematurely during a brief
pause in bulk data flow. The old fixed timeout of 1.5 characters was
just 32 microseconds at 460kbps.
At interrupt time, check for receiver holding register overrun status
and set the corresponding status bit in the return value.
When handling a buffer overrun, get a single buffer emptied and handed
back to the hardware as quickly as possible, then deal with the second
buffer. This at least minimizes data loss compared to the old logic
that fully processed both buffers before restarting the hardware.
Rewrite the logic for handling buffers after a receive timeout. The
original author speculated in a comment that there may be a race with
high speed data. There was, although it was rare. The code now handles
all three possible scenarios on receive timeout: two empty buffers, one
empty and one partial buffer, or one full and one partial buffer.
Reviewed by: imp
to the same thing) by allocating the uart(4) rx buffer based on the
device's rxfifosz rather than using a hard-coded size of 384 bytes.
The historical 384 byte size is 3 times the largest hard-coded fifo
size in the tree, so use that ratio as a guide and allocate the buffer
as three times rxfifosz, but never smaller than the historical size.