after each SYSINIT() macro invocation. This makes a number of
lightweight C parsers much happier with the FreeBSD kernel
source, including cflow's prcc and lxr.
MFC after: 1 month
Discussed with: imp, rink
for all network interfaces, not just ethernet-like ones.
Upgrade it to a louder WARNING and be explicit that the flag is obsolete.
Support for IFF_NEEDSGIANT will be removed in a few months (see arch@ for
details) and will not appear in 8.0.
Upgrade if_watchdog to a WARNING.
- Set M_BCAST|M_MCAST for incoming frames
- Send the frame to a local interface if the bridge returns the mbuf
Submitted by: Eugene Grosbein
Tested by: Boris Kochergin
specified in Table 7-10 in their destination address field shall not be relayed
by the Bridge. Add a check in bridge_forward() to adhere to this.
PR: kern/119744
functions. It is easily triggered by running routed, and, I expect, by
running any other daemon that uses routing sockets.
Reviewed by: net@
MFC after: 1 week
(dummynet), ipsec_filter() would return the empty error code and the ipsec code
would continue to forward/deference the null mbuf.
Found by: m0n0wall
Reviewed by: bz
MFC after: 3 days
link has been marked discarding by Spanning Tree. This would cause the bridge
to see duplicate packets to itself even if STP has correctly calculated the
topology and blocked redundant links.
Reported by: trasz
Tested by: trasz
MFC after: 3 days
administratively down (!IFF_UP)
- Use the same parameters to lagg_link_active() to get the backup port as in
the output path, this didnt actually matter in practice as sc_primary is
always the first on the port list.
MFC after: 3 days
bpf will see inner and outer headers or just inner or outer
headers for incoming and outgoing IPsec packets.
This is useful in bpf to not have over long lines for debugging
or selcting packets based on the inner headers.
It also properly defines the behavior of what the firewalls see.
Last but not least it gives you if_enc(4) for IPv6 as well.
[ As some auxiliary state was not available in the later
input path we save it in the tdbi. That way tcpdump can give a
consistent view of either of (authentic,confidential) for both
before and after states. ]
Discussed with: thompsa (2007-04-25, basic idea of unifying paths)
Reviewed by: thompsa, gnn
This has the benefit that rmlocks have proper support for reader recursion
(in contrast to rwlock(9) which could potential lead to writer stravation).
It also means a significant performance gain, eventhough only visible in
microbenchmarks at the moment.
Discussed on: -arch, -net
as up if at least one of its ports also has a link up. This fixes using
carp+lagg together and any other system that relies on linkstate events.
PR: kern/113956
MFC after: 3 days
2) Alter packet flow inside dummynet: allow certain packets to bypass
dummynet scheduler. Benefits are:
- lower latency: if packet flow does not exceed pipe bandwidth, packets
will not be (up to tick) delayed (due to dummynet's scheduler granularity).
- lower overhead: if packet avoids dummynet scheduler it shouldn't reenter ip
stack later. Such packets can be fastforwarded.
- recursion (which can lead to kernel stack exhaution) eliminated. This fix
long existed panic, which can be triggered this way:
kldload dummynet
sysctl net.inet.ip.fw.one_pass=0
ipfw pipe 1 config bw 0
for i in `jot 30`; do ipfw add 1 pipe 1 icmp from any to any; done
ping -c 1 localhost
3) Three new sysctl nodes are added:
net.inet.ip.dummynet.io_pkt - packets passed to dummynet
net.inet.ip.dummynet.io_pkt_fast - packets avoided dummynet scheduler
net.inet.ip.dummynet.io_pkt_drop - packets dropped by dummynet
P.S. Above comments are true only for layer 3 packets. Layer 2 packet flow
is not changed yet.
MFC after: 3 month
interface. Once the limit is reached packets with unknown source addresses are
dropped until an existing host cache entry expires or is removed. Useful to
use with the STICKY cache option.
Sponsored by: miniSuperHappyDevHouse NZ
a private softc list is needed neither for tracking clones in general
nor for destroying all clones before the module unload -- if_clone
takes care of all that. (Note that some other interface drivers do
need a softc list to be able to scan it for their private purposes.)
from Mac OS X Leopard--rationalize naming for entry points to
the following general forms:
mac_<object>_<method/action>
mac_<object>_check_<method/action>
The previous naming scheme was inconsistent and mostly
reversed from the new scheme. Also, make object types more
consistent and remove spaces from object types that contain
multiple parts ("posix_sem" -> "posixsem") to make mechanical
parsing easier. Introduce a new "netinet" object type for
certain IPv4/IPv6-related methods. Also simplify, slightly,
some entry point names.
All MAC policy modules will need to be recompiled, and modules
not updates as part of this commit will need to be modified to
conform to the new KPI.
Sponsored by: SPARTA (original patches against Mac OS X)
Obtained from: TrustedBSD Project, Apple Computer
Specifically, if two threads were doing concurrent lookups and the existing
gateway was marked down, the the first thread would drop a reference on the
gateway route and then unlock the "root" route while it tried to allocate
a new route. The second thread could then also drop a reference on the
same gateway route resulting in a reference underflow. Fix this by
clearing the gateway route pointer after dropping the reference count but
before dropping the lock. Secondly, in this same case, the second thread
would overwrite the gateway route pointer w/o free'ing a reference to the
route installed by the first thread. In practice this would probably just
fix a lost reference that would result in a route never being freed.
This fixes panics observed in rt_check() and rtexpunge().
MFC after: 1 week
PR: kern/112490
Insight from: mehuljv at yahoo.com
Reviewed by: ru (found the "not-setting it to NULL" part)
Tested by: several
queue so the output network card must support the same tagging mechanism as
how the frame was input (prepended Ethernet header tag or stripped HW mflag).
Now the vlan Ethernet header is _always_ stripped in ether_input and the mbuf
flagged, only only network cards with VLAN_HWTAGGING enabled would properly
re-tag any outgoing vlan frames.
If the outgoing interface does not support hardware tagging then readd the vlan
header to the front of the frame. Move the common vlan encapsulation in to
ether_vlanencap().
Reported by: Erik Osterholm, Jon Otterholm
MFC after: 1 week
This fixes the process portion of the bpf(4) stats if the peer forks
into the background after it's opened the descriptor. This bug
results in the following behavior for netstat -B:
# netstat -B
Pid Netif Flags Recv Drop Match Sblen Hblen Command
netstat: kern.proc.pid failed: No such process
78023 em0 p--s-- 2237404 43119 2237404 13986 0 ??????
MFC after: 1 week
1. The locking was changed to shared but roundrobin mode still updated a
pointer in the softc with the next tx interface to use. This will panic
under high load. Change this to an atomically incremented sequence number in
order to choose the tx port in round robin.
2. IFQ_HANDOFF will free the mbuf if the queue is full, this will then be freed
again by lagg_start() and panic. Reorganised the error handling and freeing
to fix this.
MFC after: 3 days
route and once they are done with it, call rtfree(). rtfree() should
only be used when we are certain we hold the last reference to the
route. This bug results in console messages like the following:
rtfree: 0xc40f7000 has 1 refs
This patch switches the rtfree() to use RTFREE_LOCKED() instead,
which should handle the reference counting on the route better.
Approved by: re@ (gnn)
Reviewed by: bms
Reported by: many via net@ and current@
Tested by: many
