billf
5f4efefebc
Stuff a variable declaration inside a #if block that is only used for that
...
#if.
1999-09-25 02:11:30 +00:00
billf
04286a15ad
Remove declaration of getenv(), we get that from stdlib.h already.
1999-09-25 02:10:38 +00:00
brian
e86d608444
Typo
...
Submitted by: Alex Nash <nash@mcs.net>
1999-09-24 23:57:22 +00:00
phantom
f637a6a879
Various style and visual changes.
...
VESA_132x30 is not available mode
SC_PIXLE_MODE -> SC_PIXEL_MODE
1999-09-24 20:39:24 +00:00
markm
05af469f85
Fix problem where a macro is not properly initialised in the !THREAD
...
case. Simple reodering does it.
Thanks to: sos
1999-09-24 19:39:34 +00:00
dillon
5fa6799671
More locking clarifications. Add skeleton manual page for VOP_LEASE
1999-09-24 17:11:02 +00:00
obrien
df3104f6f2
Switch the order of a two tests so that the error actually has to occur
...
for you to be told there was an error [during verbose boot].
I poked him for the fix, he poked me to get it committed.
Submitted by: Jason Young <doogie@anet-stl.com>
1999-09-24 16:27:32 +00:00
markm
20f9db93a6
Low-level, but significant cleanup of Perl's build process.
...
This should significantly ease "make; make install" loops.
1999-09-24 15:32:11 +00:00
dillon
d6997b00fe
More synchronization of the VOP documentation to the real world.
1999-09-24 13:58:55 +00:00
sos
36d865f2d9
Fix timeout handeling and add retry counts.
...
Add HPT366 probe message (but no real support yet),
Add CDR support for several diffenrent blocktypes, also close
disk as a multisession CD.
1999-09-24 12:36:10 +00:00
phantom
ab4110c3bc
Mention -p and -t options.
1999-09-24 11:37:06 +00:00
dillon
8dad7db428
More clarification of locking requirements.
1999-09-24 10:42:45 +00:00
dillon
386338d04f
Bring more VOP manual pages up to date in regards to locking
...
requirements.
1999-09-24 10:19:43 +00:00
dillon
609f54c951
Update errors in documentation for various VOP_ calls. Specifically,
...
describe the correct locking state expected on entry and return.
1999-09-24 07:07:02 +00:00
nsayer
044d3b94b6
Slight reordering of /etc/rc order: It now goes
...
...
recover vi
msgs/bounds
update MOTD
rc.{arch}
rc.devfs
rc.local
$local.startup
securelevel
The motive behind this is to delay rc.{arch} as long as possible,
as it loads the screensaver, which kills the splash screen.
But at the same time, it can't be done after rc.devfs, as
that might depend on arch specific actions. rc.local and local.startup
also should come after these, and securelevel must be last of all.
1999-09-24 06:49:00 +00:00
jmb
8764212375
Add information and configuration on the DUL.
...
Based upon a suggestion from
Don Croyle <croyle@gelemna.ft-wayne.in.us>.
1999-09-23 22:48:12 +00:00
jkh
a9675102dc
Guard against an rm returning non-zero status.
...
Noticed by: Makoto MATSUSHITA
1999-09-23 18:40:54 +00:00
dillon
ccee4af63a
Header file required to support ccd changes. Forgot to commit last
...
night.
1999-09-23 16:20:05 +00:00
nyan
8e881fe493
- Supported 1.23MB FD again.
...
- Supported all formats that IBM-PC's driver (isa/fd.c) supports.
- Changed the device minor numbers. They sync in IBM-PC's driver.
1999-09-23 14:21:14 +00:00
phantom
df261f51c9
mdoc(7)'fy
1999-09-23 13:45:43 +00:00
phantom
e78be029b7
mdoc(7)'fy
...
Empty sections commented.
1999-09-23 13:42:19 +00:00
phantom
472736db15
Learn nroff about -p and -t options. It allows to preprocess
...
file with pic(1) and tbl(1).
Not objected to: mpp
1999-09-23 13:40:28 +00:00
phantom
a2ad4c3e54
Add to .Nm devstat_end_transaction_buf().
...
Do some ordering.
Noticed by: ken
1999-09-23 13:31:15 +00:00
phantom
4ecfba8adc
Nuke dlopen.3 -> dlversion.3 link.
...
This function was removed by jdp in rev.1.5 of dlopen.3
Forgoten by: jdp
1999-09-23 13:26:41 +00:00
dillon
d0c237410f
Bring documentation up to date
1999-09-23 10:35:48 +00:00
dillon
173728edba
Bring ccd documentation up to date. Reference vinum, elucidate more
...
on mirroring and interleaving.
1999-09-23 10:04:25 +00:00
marcel
dcdfd6fd8e
Linux doesn't complain if you remove a msg queue that doesn't exist
...
(given the proper permissions).
1999-09-23 09:57:45 +00:00
dillon
52ab2170f3
Cleanup CCD quite a bit, including adding clarifying comments.
...
Enhance MIRROR code. Add a few more sanity checks and implement
a zone-based disk selector to make use of both disks when reading.
Also implement a read fail-over. If a read error occurs on one
disk, the I/O is retried on the other.
NOTE: CCD's mirroring support cannot deal with write errors properly
in regards to recovery, meaning that 'old' data under a write error may
be read non-deterministically if you reboot after a write error, and CCD
certainly cannot deal with a disk changeout. And it still can't. Use
vinum if you are really serious about mirroring. CCD basically just
implements a poor-man's mirror.
1999-09-23 09:25:05 +00:00
dillon
c3199b7ad0
Fix ccdiodone code. The code was using cbp->cb_buf.b_bcount to
...
sum the total amount of I/O issued to determine when all the I/O
has completed. This fails when the EOF boundry occurs in the middle
of an I/O. Using cbp->cb_buf.b_bufsize works better.
1999-09-23 08:41:48 +00:00
ken
4e2e77a0f2
Clarify what getdevs() expects as input.
...
Prompted by: grog
1999-09-23 06:36:02 +00:00
obrien
98b2b7e66c
Sync with am-utils-6.0.2s2.
1999-09-23 06:19:25 +00:00
jhay
dd86ea74f1
Make the frequency tuneable via a sysctl.
...
Reviewed by: phk
1999-09-23 06:02:30 +00:00
obrien
fd1d2c9a38
Fix conflicts.
...
Version 6.0.2s2 gives us a better fix a buffer overflow problem in
real_plog(). It also gives us a few code cleanups to quiet `gcc -Wall'.
1999-09-23 05:36:01 +00:00
peter
7955c51a1d
Restore vendor $Id$ now that it won't be clobbered.
1999-09-23 05:26:10 +00:00
obrien
5b5a6e51e1
This commit was generated by cvs2svn to compensate for changes in r51591,
...
which included commits to RCS files with non-trunk default branches.
1999-09-23 05:15:28 +00:00
obrien
525520fd05
Virgin import of AMD (am-utils) v6.0.2s2
1999-09-23 05:15:28 +00:00
peter
77d22ec61a
Fix a commit that shouldn't have snuck in. Rev 1.12 was a part of the
...
newbusification of aha, not device_get_flags() related...
1999-09-23 05:01:52 +00:00
jkh
610dbabb57
MFS: firewall -> firewall_type
1999-09-23 04:22:33 +00:00
kato
e789a63b40
Fixed the bug that the number of sectors per cylinder was stored into
...
the ncyls (number of cylinders) in dsinit().
Submitted by: chi@bd.mbn.or.jp (Chiharu Shibata)
1999-09-23 04:09:01 +00:00
kato
a0968f988f
- Fixed DMA 64k boundary problem.
...
- Test the processor flag to detect disk I/O BIOS errors.
Submitted by: IMAI Takeshi <take-i@ceres.dti.ne.jp>
1999-09-23 03:57:16 +00:00
kato
407115b4db
Sync with sys/dev/syscons/syscons.c revision 1.322.
1999-09-23 03:37:40 +00:00
wpaul
165d81879e
As suggested by phk, unconditionalize BPF support in these drivers. Since
...
there are stubs compiled into the kernel if BPF support is not enabled,
there aren't any problems with unresolved symbols. The modules in /modules
are compiled with BPF support enabled anyway, so the most this will do is
bloat GENERIC a little.
1999-09-23 03:32:57 +00:00
ache
9e89242d36
moved to tmac/locale
1999-09-23 02:56:00 +00:00
ache
f06ea789bb
moved to koi2alt
1999-09-23 02:54:44 +00:00
dillon
fc40d2e20f
Fix bug in pseudo-geometry calculation code that assumed a sector size
...
smaller then 1024 bytes.
1999-09-23 00:09:08 +00:00
archie
eec6675661
Remove the "diffburst" tool, because equivalent functionality is now available
...
via "split -p". Leave a note to this effect in the README file.
1999-09-22 23:48:58 +00:00
phantom
f78a3faf1a
Add gencat(1) to SEE ALSO section.
...
PR: docs/13658
Submitted by: Zahemszky Gabor <zgabor@code.hu>
1999-09-22 22:44:42 +00:00
phantom
8559cd0134
Allow .Rv macro to be used in 7th section also. This patch
...
will fix "Usage: .Rv ..." error at mdoc.samples.7
Ok'ed by: mpp
1999-09-22 22:36:16 +00:00
phantom
efe68309f1
.PB -> .El
...
PR: docs/13283
Submitted by: Norihiro Kumagai <kuma@jp.FreeBSD.org>
1999-09-22 22:23:17 +00:00
phantom
266dc1ce08
Add links for errc.3, verrc.3, warnc.3, vwarnc.3.
...
PR: docs/13222
Submitted by: Ben Smithurst <ben@scientia.demos.co.uk>
1999-09-22 22:12:23 +00:00