in6_selectsrc() may call fib6_lookup() in some cases, which requires
epoch. Wrap in6_selectsrc* calls into epoch inside its users.
Mark it as requiring epoch by adding NET_EPOCH_ASSERT().
MFC after: 1 weeek
Differential Revision: https://reviews.freebsd.org/D28647
While I was there:
- Fix some typos
- Fix an excessive argument "indent" reported by mandoc -Tlint
- Replace a dead link with the one suggested by
https://www.uefi.org/uefi
Submitted by: linimon (in part)
Reviewed by: bcr
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27774
Preserve more space for swap devise names.
Prevent line overflow with long devise name.
Don't draw a bar when swap is not used at all.
Simplify and optimize code.
Change the label to end at end of 100%.
PR: 251655
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27496
When locating the anonymous memory region for a vm_map with ASLR
enabled, we try to keep the slid base address aligned on a superpage
boundary to minimize pagetable fragmentation and maximize the potential
usage of superpage mappings. We can't (portably) do this if superpages
have been disabled by loader tunable and pagesizes[1] is 0, and it
would be less beneficial in that case anyway.
PR: 253511
Reported by: johannes@jo-t.de
MFC after: 1 week
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D28678
Currently the struct has a 4 byte padding stemming from 3 ints.
1. prio comfortably fits in short, unfortunately there is no dedicated
type for it and plumbing it throughout the codebase is not worth it
right now, instead an assert is added which covers also flags for
safety
2. lk_exslpfail can in principle exceed u_short, but the count is
already not considered reliable and it only ever gets modified
straight to 0. In other words it can be incrementing with an upper
bound of USHRT_MAX
With these in place struct lock shrinks from 48 to 40 bytes.
Reviewed by: kib (previous version)
Differential Revision: https://reviews.freebsd.org/D28680
From openzfs-master 0ae184a6b commit message:
If we do not write any buffers to the cache device and the evict hand
has not advanced do not update the cache device header.
Cherry-picked from openzfs 0ae184a6baaf71e155e9b19af81b75474622ff58
Patch Author: George Amanakis <gamanakis@gmail.com>
MFC after: 3 days
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D28682
From openzfs-master 62d4287f2 commit message:
When scrubbing, (non-sequential) resilvering, or correcting a checksum
error using RAIDZ parity, ZFS should heal any incorrect RAIDZ parity by
overwriting it. For example, if P disks are silently corrupted (P being
the number of failures tolerated; e.g. RAIDZ2 has P=2), `zpool scrub`
should detect and heal all the bad state on these disks, including
parity. This way if there is a subsequent failure we are fully
protected.
With RAIDZ2 or RAIDZ3, a block can have silent damage to a parity
sector, and also damage (silent or known) to a data sector. In this
case the parity should be healed but it is not.
Cherry-picked from openzfs 62d4287f279a0d184f8f332475f27af58b7aa87e
Patch Author: Matthew Ahrens <matthew.ahrens@delphix.com>
MFC after: 3 days
Reviewed by: delphij
Differential Revision: https://reviews.freebsd.org/D28681
Currently when peer information is displayed with `ifconfig wgN peer ..`
or `ifconfig wgN peer-list`, the netmask of the first `allowed-ips` will
be used as the netmask of all CIDR in `allowed-ips`. For example, if
the list is `192.168.1.0/24, 172.16.0.0/16`, it will display as
`192.168.1.0/24, 172.16.0.0/24`. While this does not affect the actual
functionality, it is very confusing.
Submitted by: Michael Chiu <nyan -at- myuji.xyz>
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D28655
MFC after: 1 day
It was reported that getdirentries(2) was
returning dirents with d_off set to 0 for an NFS
mount.
This is believed to be correct behaviour at
this time (it may change for some NFS mounts
in the future), but is inconsistent with what the
getdirentries(2) man page says.
This patch fixes the man page.
This is a content change.
PR: 253428
Reviewed by: asomers
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D28664
We use ascii box chars with serial console because we do not know
if terminal can draw unixode box chars. Same problem is about userboot
console.
MFC after: 5 days
Locking the second lock which causes the LOR, can be skipped because
the code updating the shared variables is always executing from the
same USB thread.
lock order reversal:
1st 0xfffff80005cc3840 pcm7:play:dsp7.p0 (pcm play channel, sleep mutex)
@ usb_transfer.c:2342
2nd 0xfffff80005cc3860 pcm7:record:dsp7.r0 (pcm record channel, sleep mutex)
@ uaudio.c:2317
lock order pcm record channel -> pcm play channel established at:
witness_checkorder+0x461
__mtx_lock_flags+0x98
dsp_mmap_single+0x151
vm_mmap_cdev+0x65
devfs_mmap_f+0x143
kern_mmap_req+0x594
sys_mmap+0x46
amd64_syscall+0x12e
fast_syscall_common+0xf8
lock order pcm play channel -> pcm record channel attempted at:
witness_checkorder+0xd82
__mtx_lock_flags+0x98
uaudio_chan_play_callback+0xeb
usbd_callback_wrapper+0x7ec
usb_command_wrapper+0x7e
usb_callback_proc+0x8e
usb_process+0xf3
fork_exit+0x80
fork_trampoline+0xe
Found by: Stefan Ehmann <shoesoft@gmx.net>
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The veriexec option is redundant, mac_veriexec is sufficient.
MFC after: 1 week
#
# 72 columns --|
#
# Uncomment and complete these metadata fields, as appropriate:
#
# PR: <If and which Problem Report is related.>
# Reported by: <If someone else reported the issue.>
# Reviewed by: <If someone else reviewed your modification.>
# Approved by: <If you needed approval for this commit.>
# Obtained from: <If the change is from a third party.>
# MFC after: <N [day[s]|week[s]|month[s]]. Request a reminder email>
# MFH: <Ports tree branch name. Request approval for merge.>
# Relnotes: <Set to 'yes' for mention in release notes.>
# Security: <Vulnerability reference (one per line) or description.>
# Sponsored by: <If the change was sponsored by an organization.>
# Pull Request: <https://github.com/freebsd/<repo>/pull/###>
# Differential Revision: <https://reviews.freebsd.org/D###>
#
# "Pull Request" and "Differential Revision" require the *full* GitHub or
# Phabricator URL. The commit author should be set appropriately, using
# `git commit --author` if someone besides the committer sent in the change.
#
# Uncomment and complete these metadata fields, as appropriate:
#
# PR:
# Reported by: <If someone else reported the issue.>
# Reviewed by: <If someone else reviewed your modification.>
# Approved by: <If you needed approval for this commit.>
# Obtained from: <If the change is from a third party.>
# MFC after: <N [day[s]|week[s]|month[s]]. Request a reminder email>
# MFH: <Ports tree branch name. Request approval for merge.>
# Relnotes: <Set to 'yes' for mention in release notes.>
# Security: <Vulnerability reference (one per line) or description.>
# Sponsored by: <If the change was sponsored by an organization.>
# Pull Request: <https://github.com/freebsd/<repo>/pull/###>
# Differential Revision: <https://reviews.freebsd.org/D###>
#
# "Pull Request" and "Differential Revision" require the *full* GitHub or
# Phabricator URL. The commit author should be set appropriately, using
# `git commit --author` if someone besides the committer sent in the change.
#
Use ISS for SEG.SEQ when sending a SYN-ACK segment in response to
an SYN segment received in the SYN-SENT state on a socket having
the IPPROTO_TCP level socket option TCP_NOOPT enabled.
Reviewed by: rscheff
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D28656
The only place where in6_ifawithifp() is used is ip6_output(),
which uses the returned ifa to bump traffic counters.
Given ifa stability guarantees is provided by epoch, do not refcount ifa.
This eliminates 2 atomic ops from IPv6 fast path.
Reviewed By: rstone
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28649
defined by hardware rather than cached one to match HIDIOCGRDESC ioctl.
This fixes errors reported by hid-tools being run against /dev/hidraw#
device node belonging to driver which overloads report descriptor.
MFC after: 1 week
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
Ignore fantom keyboard state reports entirelly rather than ignore
RollOver states for each key separatelly. Latter results in spurious
release/push pairs of events on each fantom keyboard state report.
Reported by: Jan Martin Mikkelsen <janm_AT_transactionware_DOT_com>
Submitted by: Jan Martin Mikkelsen (initial version)
PR: 253249
MFC after: 1 week
Previously bsd.compiler.mk was not able to detect the compiler type for
Ubuntu's /usr/bin/cc unless we were invoking the /usr/bin/gcc symlink.
This problem has been fixed by 9c6954329a
so we can drop the workaround from make.py.
Reviewed By: jrtc27
Differential Revision: https://reviews.freebsd.org/D28323
The POSIX sh case statement does not allow for pattern matching using the
regex + qualifier so this case statement never matches. Instead just check
for a string starting with a digit followed by any character.
While touching these files also fix various shellcheck warnings.
`kyua -v parallelism=4 test` failed before, succeeds now.
Reviewed By: imp
Differential Revision: https://reviews.freebsd.org/D28480
The rpc_control() API does not accept the CLCR_SET_RPCB_TIMEOUT command,
it only accepts RPC_SVC_CONNMAXREC_GET/RPC_SVC_CONNMAXREC_SET, so it was
not doing anything.
Instead of incorrectly calling this API, use clnt_create_timed() instead.
I noticed this because the test was timing out after 120s in the CheriBSD CI.
Reviewed By: ngie
Differential Revision: https://reviews.freebsd.org/D28478
summary of changes, or for a more thorough overview:
https://subversion.apache.org/docs/release-notes/1.14
NOTE 1: There is no need to dump and reload repositories, and the
working copy format is still the same as Subversion 1.8 through 1.13.
NOTE 2: The upstream release also contains a fix for a security issue in
mod_dav_svn (CVE-2020-17525), but since we do not build or use any
Apache modules, it is not an issue for the FreeBSD base system.
Relnotes: yes
MFC after: 3 days
nmtree is derived from fmtree, and has been the default mtree(8) since
6adfbbbf16, a little over a year after its introduction.
fmtree has not seen any substantial work since then, except for build
fixes and runtime issues that were diagnosed in nmtree and backported
because this was still in the tree.
Turn it off by default.
Reviewed by: bdrewery, brooks, cy, emaste
Differential Revision: https://reviews.freebsd.org/D28573
Note that this mtree(8) is actually installed as fmtree(8), while
mtree(8) is located in ^/contrib/mtree -- thus, the reference to
mtree(8) makes a lot more sense in the context in which folks would
actually notice it. Shout-out to Ravi for pointing out that this may
not be an obvious fact.
MFC after: 3 days
Reviewed by: bdrewery, brooks, cy, emaste
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D28573
This allows d_off to be used with lseek to position the file so that
getdirentries(2) will return the next entry. It is not used by
readdir(3).
PR: 253411
Reported by: John Millikin <jmillikin@gmail.com>
Reviewed by: cem
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28605
Add manual page based on the usage in the script with a few changes and
hook it up to the build.
Reviewed by: 0mp, markj
Differential Revision: https://reviews.freebsd.org/D28519
Rather than putting revision metadata in .git/arc/create-message, create
a tmpfile and use that. Otherwise arc diff always prompts about it and
in some cases complains because its standard input is piped.
Reported by: imp
Differential Revision: https://reviews.freebsd.org/D28614
The case of adding interface route by specifying interface
address as the gateway was missed during code refactoring.
Re-add it back by copying non-AF_LINK gateway data when RTF_GATEWAY
is not set.
Reviewed by: donner
MFC after: 3 days
unsz was always exactly '1' here due to an unfortunate mispositioning
of closing parenthesis. While it's generally irrelevant because bind(2)
is passed the (accurate) sep->se_ctrladdr_size instead, it's not very
helpful for anything locally that wants to use it rather than assuming
that sep->se_ctrladdr_size perfectly fits the end of sun_path.
Just drop unsz entirely and use the result of SUN_LEN() for it.
MFC-after: 3 days
The "source" variable was introduced in r26072, probably as the
traditional counterpart to "target". But the "source"/"target" names
suggest the opposite of their actual meaning. With ln, for example, the
source is the real file and the target is the newly created link. In
mount_nullfs the meaning is the opposite: the target is the existing
file system and the source is the newly created mountpoint. Better to
use "target"/"mountpoint" terminology, which matches the man page.
MFC after: 6 weeks
Sponsored by: Axcient
This was introduced in 8998619212, and left behind when the hpn-ssh
patches were removed in 60c59fad88. Although Being able to log
SO_RCVBUF in debug mode might have some small value on its own, it's
not worth carrying an extra diff against upstream.
Reviewed by: kevans
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28610
The panic reported in 253158 arises because the /mnt/.snap/.factory
snapshot allocated the last block in the filesystem. The snapshot
code allocates the last block in the filesystem as a way of setting
its length to be the size of the filesystem. Part of taking a
snapshot is to remove all the earlier snapshots from the image of
the newest snapshot so that newer snapshots will not claim the blocks
of the earlier snapshots. The panic occurs when the new snapshot
finds that both it and an earlier snapshot claim the same block.
The fix is to set the size of the snapshot to be one block after
the last block in the filesystem. This block can never be allocated
since it is not a valid block in the filesystem. This extra block
is used as a place to store the initial list of blocks that the
snapshot has already copied and is used to avoid a deadlock in and
speed up the ffs_copyonwrite() function.
Reported by: Harald Schmalzbauer
Tested by: Peter Holm
PR: 253158
Sponsored by: Netflix
This was introduced in 03f6c5cd93, which added use of
sysctl net.inet.ip.portrange.reservedhigh instead of IPPORT_RESERVED,
but it appears the rest of that change was lost in some subsequent
update.
The change should probably be restored, but until then there is no
reason to leave an unused variable around.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
In particular, replace a note that reload through vget() is obsoleted,
with explanation why this code is required.
Reviewed by: chs, mckusick
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This catches both missed processing of IN_ENDOFF and missed application
of VOP_VPUT_PAIR() after VOP that created an entry in the directory.
Reviewed by: chs, mckusick
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Such vnodes prevent inode reuse, and should be force-cleared when ffs_valloc()
is unable to find a free inode.
Reviewed by: chs, mckusick
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
if we noted a parallel request is active and declined to overflow the
system with parallel redundant sync of the vnodes. But we need to wait
for the flush to finish to see if there are any freed resources.
Reviewed by: chs, mckusick
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
