The sensor value is formatted similarly to previous models (same
bitfield sizes, same units), but must be read off of the internal
System Management Network (SMN) from the System Management Unit (SMU)
co-processor.
PR: 218264
Reported and tested by: Nils Beyer <nbe AT renzel.net>
Reviewed by: avg (no +1), mjoras, truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12217
AMD Family 17h CPUs have an internal network used to communicate between
the host CPU and the PSP and SMU coprocessors. It exposes a simple
32-bit register space.
Reviewed by: avg (no +1), mjoras, truckman
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12217
This driver supports both NTB-to-NTB and NTB-to-Root Port modes (though
the second with predictable complications on hot-plug and reboot events).
I tested it with PEX 8717 and PEX 8733 chips, but expect it should work
with many other compatible ones too. It supports up to two NT bridges
per chip, each of which can have up to 2 64-bit or 4 32-bit memory windows,
6 or 12 scratchpad registers and 16 doorbells. There are also 4 DMA engines
in those chips, but they are not yet supported.
While there, rename Intel NTB driver from generic ntb_hw(4) to more specific
ntb_hw_intel(4), so now it is on par with this new ntb_hw_plx(4) driver and
alike to Linux naming.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
A follow-up to r322836.
Warnings for the unused declaration were breaking some second tier
architectures, but did not show up in Clang on x86.
Reported by: markj (ddb.4), emaste (declaration)
Sponsored by: Dell EMC Isilon
Remote DMA over Converged Ethernet, RoCE, for the ConnectX-4 series of
PCI express network cards.
There is currently no user-space support and this driver only supports
kernel side non-routable RoCE V1. The krping kernel module can be used
to test this driver. Full user-space support including RoCE V2 will be
added as part of the ongoing upgrade to ibcore from Linux 4.9. Otherwise
this driver is feature equivalent to mlx4ib(4). The mlx5ib(4) kernel
module will only be built when WITH_OFED=YES is specified.
MFC after: 2 weeks
Sponsored by: Mellanox Technologies
during drain operations. When an sbuf is configured to use this feature by way
of the SBUF_DRAINTOEOR sbuf_new() flag, top-level sections started with
sbuf_start_section() create a record boundary marker that is used to avoid
flushing partial records.
Reviewed by: cem,imp,wblock
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D8536
it automatically after it runs.
The config_intrhook mechanism allows a driver to stall the boot process
until device(s) required for booting are available, by not allowing system
inits to proceed until all intrhook functions have been unregistered.
Virtually all existing code simply unregisters from within the hook function
when it gets called.
This new function makes that common usage more convenient. Instead of
allocating and filling in a struct, passing it to a function that might (in
theory) fail, and checking the return code, now a driver can simply call
this cannot-fail routine, passing just the intrhook function and its arg.
Differential Revision: https://reviews.freebsd.org/D11963
geom_bsd, geom_mbr and geom_sunlabel have been obsolete since Marcel
Moolenaar's geom_part was in FreeBSD 7. They haven't been in GENERIC
since FreeBSD 8. Add warning when used.
geom_vol_ffs has been obsolete since ufs support to geom_label was
committed in FreeBSD 5. It hasn't been in GENERIC since FreeBSD 5.
Add warning when used.
geom_fox has been obsolete since gmultipath was committed in FreeBSD 7.
(no warning added, since this is a very obscure class).
These will all be removed in FreeBSD 12.
MFC After: 3 days
Differential Revision: https://reviews.freebsd.org/D11935
Note: Classes will be removed after MFC
New flag 0x4 can be configured in net.enc.[in|out].ipsec_bpf_mask.
When it is set, if_enc(4) additionally captures a packet via BPF after
invoking pfil hook. This may be useful for debugging.
MFC after: 2 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D11804
Implement disk_add_alias to allow aliases to be added to disks. All
disk have a primary name (say "foo") can also have secondary names
(say "bar") such that all instances of "foo" also have a "bar"
alias. So if you have foo0, foo0p1, foo1, foo1s1 and foo1s1a nodes
created by the foo driver and gpart, device nodes bar0, bar0p1, bar1,
bar1s1 and bar1s1a will appear as symlinks back to the original nodes.
This generalizes to multiple aliases. However, since the unit number
follows the primary name, multiple device drivers can't create the
same aliases unless those drives coorinate the unit number space (eg
you couldn't add an alias 'disk' to both 'da' and 'ada' because it's
possible to have da0 and ada0, because 'disk0' is ambiguous).
Differential Revision: https://reviews.freebsd.org/D11873
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
Remove some statements which are no longer correct after ino64, and
clarify other.
The rewording is not in fact specific to ino64 and improvements are
useful on the stable branches.
Noted and reviewed by: bde
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
- Store the symbol table contents in an anonymous swap-backed object. Have
mmap(/dev/ksyms) map that object, and stop mapping the symbol table into
the calling process in ksyms_open(). Previously we would cache a pointer
to the pmap of the opening process, and mmap(/dev/ksyms) would create a
mapping using the physical address found by a pmap lookup at the initial
mapping address. However, this assumes that the cached pmap is valid,
which may not be the case. [1]
- Remove the ksyms ioctl interface. It appears to have been added to work
around a limitation in libelf that no longer exists; see r321842.
Moreover, the interface is difficult to support and isn't present in
illumos. Since ksyms was added specifically to support lockstat(1), it
is expected that this removal won't have any real impact.
- Simplify ksyms_read() to avoid unnecessary copying.
- Don't call the device handle destructor if we fail to capture a snapshot
of the kernel's symbol table. devfs will do that for us.
Reported by: Ilja van Sprundel <ivansprundel@ioactive.com> [1]
Reviewed by: kib (previous revision)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11789
Linux specific things to the native fdescfs file system.
Unlike FreeBSD, the Linux fdescfs is a directory containing a symbolic
links to the actual files, which the process has open.
A readlink(2) call on this file returns a full path in case of regular file
or a string in a special format (type:[inode], anon_inode:<file-type>, etc..).
As well as in a FreeBSD, opening the file in the Linux fdescfs directory is
equivalent to duplicating the corresponding file descriptor.
Here we have mutually exclusive requirements:
- in case of readlink(2) call fdescfs lookup() method should return VLNK
vnode otherwise our kern_readlink() fail with EINVAL error;
- in the other calls fdescfs lookup() method should return non VLNK vnode.
For what new vnode v_flag VV_READLINK was added, which is set if fdescfs has beed
mounted with linrdlnk option an modified kern_readlinkat() to properly handle it.
For now For Linux ABI compatibility mount fdescfs volume with linrdlnk option:
mount -t fdescfs -o linrdlnk null /compat/linux/dev/fd
Reviewed by: kib@
MFC after: 1 week
Relnotes: yes
over the scheduling precision than 'ticks' can offer, and because sometimes
you're already working with sbintime_t units and it's dumb to convert them
to ticks just so they can get converted back to sbintime_t under the hood.
- Remove 'if_rtwn_load="YES"' line from loader.conf; the module was
renamed in r319733 + it will be loaded automatically as a dependency.
- Move new sentence to new line.
- Add short description for dev.rtwn.%d.rx_buf_size tunable.
If ipfw_netflow_fib, the ipfw rule will only match packets in that FIB.
While here correct some value in rc.conf(5) to be int and not str.
Sponsored by: Gandi.net
The benefit of BIT_FLS() is that ffsl() can be implemented with a
count leading zeros instruction which is more widespread available.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 1 week
- Address most of the post-commit comments on D11128.[1]
- Reference the man pages for the lock types supported by the provider.
- Add a BUGS section.
- Eliminate some redundancy by describing similar probes in the same
paragraph.
- Fix several inaccuracies, particularly in the probe argument
descriptions.
Submitted by: wblock [1]
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11293
Instead of using GID_FT SNS request to get list of registered FCP ports,
use GID_PT to get list of all Nx_Ports, and then use GFF_ID and/or GFT_ID
requests to find whether they are FCP and target capable.
The problem with old approach is that GID_FT does not report ports without
FC-4 type registered. In particular it was impossible to boot OS from
FreeBSD FC target using QLogic FC BIOS, since one does not register FC-4
type even on new cards and so ignored by old code as incompatible.
As a side bonus this allows initiator to skip pointless logins to other
initiators by fetching that information from SNS instead.
In case some switches do not implement GFF_ID/GFT_ID correctly, add sysctls
to disable that functionality. I handled broken GFF_ID of my Brocade 200E,
but there may be other switches with different bugs.
Linux also uses GID_PT, but GFF_ID is disabled by default there, and GFT_ID
is not supported.
Sponsored by: iXsystems, Inc.
AKA Make time_t 64 bits on powerpc(32).
PowerPC currently (until now) was one of two architectures with a 32-bit time_t
on 32-bit archs (the other being i386). This is an ABI breakage, so all ports,
and all local binaries, *must* be recompiled.
Tested by: andreast, others
MFC after: Never
Relnotes: Yes
Add a make.conf DTC variable that control which DTC (Device Tree Compiler)
to use.
Reviewed by: bdrewery, imp
Differential Revision: https://reviews.freebsd.org/D9577
Zap trailing white and double spaces
Remove extra coma which is not required.
Bump date.
Reviewed by: gnn
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D11142
