Now an interface name can be specified for nptv6 instance instead of
ext_prefix. The module will track if_addr_ext events and when suitable
IPv6 address will be added to specified interface, it will be configured
as external prefix. When address disappears instance becomes unusable,
i.e. it doesn't match any packets.
Reviewed by: 0mp (manpages)
Tested by: Dries Michiels <driesm dot michiels gmail com>
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17765
For example, in case of super-user:
$ sudo ping -s -64 127.0.0.1
PING 127.0.0.1 (127.0.0.1): -64 data bytes
ping: sendto: Invalid argument
For unprivileged user:
$ ping -s -64 127.0.0.1
ping: packet size too large: 18446744073709551552 > 56: Operation not permitted
Fix this by switching from strtoul() to strtol() for integer arguments
and adding explicit checks for negative values.
MFC after: 1 month
It produces incompatibility when rules listing is used again to
restore saved ruleset, because "ip6" keyword produces separate opcode.
The kernel already has the check and only IPv6 packets will be checked
for matching.
PR: 232939
MFC after: 3 days
There is no need to check if capdns is NULL.
If we will build the system without casper all cap_gethostaddr will be
replaced by the standard functions.
Make it clear that ipfw action set for layer2 frames it a bit limited.
PR: 59835
Reviewed by: yuripv
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D17719
The buffer is already zeroed in compile_rule() function, and also it
may contain configured F_NOT flag in o.len field. This fixes the filling
for "not icmp6types" opcode.
PR: 232939
MFC after: 3 days
tcpdump can capture packet traces from the usb bus. usbus[0-9] are
registered as ifnet devices so this can work. When these devices come
up, devd was trying to run pccard_ether on those interfaces, which
didn't exist and generated an error.
program to use the libufs library interface. No functional change
(as for now the libufs library does not do inode check-hashes).
Reviewed by: kib
Sponsored by: Netflix
This change defines the RA "6" (IPv6-Only) flag which routers
may advertise, kernel logic to check if all routers on a link
have the flag set and accordingly update a per-interface flag.
If all routers agree that it is an IPv6-only link, ether_output_frame(),
based on the interface flag, will filter out all ETHERTYPE_IP/ARP
frames, drop them, and return EAFNOSUPPORT to upper layers.
The change also updates ndp to show the "6" flag, ifconfig to
display the IPV6_ONLY nd6 flag if set, and rtadvd to allow
announcing the flag.
Further changes to tcpdump (contrib code) are availble and will
be upstreamed.
Tested the code (slightly earlier version) with 2 FreeBSD
IPv6 routers, a FreeBSD laptop on ethernet as well as wifi,
and with Win10 and OSX clients (which did not fall over with
the "6" flag set but not understood).
We may also want to (a) implement and RX filter, and (b) over
time enahnce user space to, say, stop dhclient from running
when the interface flag is set. Also we might want to start
IPv6 before IPv4 in the future.
All the code is hidden under the EXPERIMENTAL option and not
compiled by default as the draft is a work-in-progress and
we cannot rely on the fact that IANA will assign the bits
as requested by the draft and hence they may change.
Dear 6man, you have running code.
Discussed with: Bob Hinden, Brian E Carpenter
When users mark an interface to not use aliases they likely also don't
want to use the link-local v6 address there.
PR: 201695
Submitted by: Russell Yount <Russell.Yount AT gmail.com>
Differential Revision: https://reviews.freebsd.org/D17633
and runs scripts containing "KEYWORD: resume" with single "resume" argument.
Working example is the port sysutils/cpupdate that defines
extra_commands="resume" to reload CPU microcode cleared
by suspend/resume sequence.
This change does nothing for a system having no scripts with KEYWORD: resume.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D15247
that is already present in a kernel statically.
For example, the command "mount_msdosfs -L ru_RU.KOI8-R" fails with error
"mount_msdosfs: msdosfs_iconv: File exists" for a kernel having
options LIBICONV and MSDOSFS_ICONV. After this change, it mounts successfully.
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D16951
Previously, route returned 1 in case of error properly signalling failure
but "route -q" it returned 0 for same case. Fix it.
PR: 186333
MFC after: 1 month
Start with a short summary and cover the options in a standard list style.
Organize sections by common focus and prioritize more useful information
closer to the top.
Flesh out authors, history, caveats, and security considerations sections.
Reviewed by: markj, eadler (previous version)
Differential Revision: https://reviews.freebsd.org/D17679
The premise of dumpon -k foo.pem is that dump contents will be confidential
except to anyone holding the corresponding RSA private key.
This guarantee breaks down when weak RSA keys are used. Small RSA keys
(e.g. 512 bits) can be broken on a single personal computer in tractible
time. Marginal RSA keys (768 bits) can be broken by EC2 and a few dollars.
Even 1024 bit keys can probably be broken by sophisticated and wealthy
attackers.
NIST SP800-57 (2016) recommends a minimum of 2048 bit RSA keys, and
estimates this provides 112 bits of security.
It would also be good to protect users from weak values of 'e' (i.e., 3) and
perhaps sanity check that their public key .pem does not accidentally
contain their private key as well. These considerations are left as future
work.
Reviewed by: markj, darius AT dons.net.au (previous version)
Discussed with: bjk
Differential Revision: https://reviews.freebsd.org/D17678
check hash to the superblock. If a check hash fails when an attempt
is made to mount a filesystem, the mount fails with EINVAL (Invalid
argument). This avoids a class of filesystem panics related to
corrupted superblocks. The hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Reviewed by: kib
Tested by: Peter Holm
Sponsored by: Netflix
to switch the output method in run-time. Also document some sysctl
variables that can by changed for NAT64 module.
NAT64 had compile time option IPFIREWALL_NAT64_DIRECT_OUTPUT to use
if_output directly from nat64 module. By default is used netisr based
output method. Now both methods can be used, but they require different
handling by rules.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D16647
that was added using "new rule format". And then, when the kernel
returns rule with this flag, ipfw(8) can correctly show it.
Reported by: lev
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17373
for already existing interface.
It appeared, that ifconfig(8) assumes `create` keyword as hostname and
tries to resolve it, when `ifconfig ifname create` invoked for already
existing interface. This can produce some unexpected results, when hostname
resolving has successfully happened. This patch adds check for such case.
When an interface is already exists, and create is only one argument,
return error message. But when there are some other arguments, just remove
create keyword from the arguments list.
Obtained from: Yandex LLC
MFC after: 3 weeks
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17171
Exiting with a signal should not be treated the same as successful exit with
zero status.
Return signal exit information to the callers via negative integers, to
enable distinction from normal exit statuses. (All consumers that check for
errors don't care what the exact non-zero exit value is -- in such a case
they print a diagnostic message and either continue or bail.)
Additionally, check for unexpected sources of waitpid() wakeup and bail if
we encounter them.
Reported by: lev@
Reviewed by: kib, lev, markj (earlier version)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D17035
When we set the ifname we have to copy the string, rather than just keep
the pointer.
PR: 231323
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D17507
The reasons for this are forward looking to pkgbase:
* /sbin/init is a special binary; try not to replace it with
every package update because an rc script was touched.
(a follow-up commit will make init its own package)
* having rc in its own place will allow more easy replacement
of the rc framework with alternatives, such as openrc.
Discussed with: brd (during BSDCam), kmoore
Requested by: cem, bz
PR: 231522
Approved by: re (gjb)
mips64 supports COMPAT_FREEBSD32 (for o32 binaries), so run the 32-bit
compat ldconfig on it as well.
Reported by: brooks
Reviewed by: brooks, kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17342
Since r154114 which introduced ldconfig_local32_dirs, ldconfig -32 was
called with -m. This means that ld-elf32.so.hints paths set is not
cleared for compat32 on boot, unlike ld,so,hints. Same -m was used in
r294295 for ld-elf-soft.so.hints on arm. The patch fixes the
asymmetry.
Noted by: Andreas Longwitz <longwitz@incore.de>
Reviewed by: brooks, emaste, imp
Discussed with: bdrewery
Sponsored by: The FreeBSD Foundation
Approved by: re (gjb)
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D17331
when `ifconfig ipsec create reqid N` command invoked without interface
unit number. The "name" global variable is updated after interface
cloning in the ifclonecreate() and contains actual interface name.
Reported by: lev
Approved by: re (kib)
MFC after: 1 week
Don't add it. This should fix when we do regepx matches against
variables we've set and fix wifi bring up.
PR: 231441
Approved by: re@ (kib)
Differential Revision: https://reviews.freebsd.org/D17267
This leverages CONFS to handle the install.
Approved by: re (blanket, pkgbase), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17217
This is being done a separate step to ease importing into other VCSes.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D17160
fasthalt has behaved like reboot, instead of like halt, since r228408
(2011, 10.0-RELEASE). Fix it. One wonders if anyone will notice.
Approved by: re (kib)
MFC after: 3 days
Sponsored by: Dell EMC Isilon
Sample output:
% geom -t
Geom Class Provider
da0 DISK da0
da0 PART da0s1
da0s1 PART da0s1a
ffs.da0s1a VFS
da0s1a DEV
da0s1 DEV
da0 DEV
da1 DISK da1
swap SWAP
da1 DEV
cd0 DISK cd0
cd0 DEV
Reviewed by: oshogbo
Approved by: re (kib)
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17151
It completely unnecessarily iterates over all filesystems and happens
to be executed a lot e.g. by synth.
Reviewed by: kib
Approved by: re (gjb)
Differential Revision: https://reviews.freebsd.org/D17143
dhclient and ping normally use libcasper services. These are not
available in statically-linked binaries, so when WITHOUT_DYNAMICROOT is
set disable libcasper use, as with rescue builds. Also emit a warning
as it's undesirable to build this way.
Reported by: Michael Dexter
Reviewed by: rgrimes
Tested by: Michael Dexter
Approved by: re (kib)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D17074
Use nitems(), do not assume EFI_MD_TYPE_ contiguous allocation, in
particular, switch to use designated array initializers.
Reviewed by: jhb (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Approved by: re (gjb)
Add PersistentMemory to the list of sysctl's known memory types
when decoding an EFI memory map.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
MFC after: 1 week
Approved by: re (rgrimes)
And simplify this a little by flattening the directory structure.
Approved by: re (gjb), will (mentor)
Differential Revision: https://reviews.freebsd.org/D16955
In the conversion, the newline got stripped. It worked fine when there
was only one module, but not when there are many. Add back the missing
newline.
Approved by: re@ (kib)
PR: 230868
Differential Revision: https://reviews.freebsd.org/D16895
vermaden (maintainer of beadm) points out the following inconsistencies:
- "missing command" is not printed prior to usage if the error is simply a
missing command; this should be obvious from the context
- "bectl rename" isn't using the "don't unmount" flag (zfs rename -u), so
the active BE can't be renamed. It doesn't make sense in our context to
*not* use -u, so use it.
Documentation updates reflect the above and note an inconsistency with the
'destroy' command that is consistent with other parts of the base system.
A fix for libbe(3) not properly being installed to /lib is included.
SHLIBDIR should have been added when it was moved in r337995.
Approved by: re (kib)
In order to build on a Linux host we need to bootstrap md5 since the Linux
md5sum command produces output in a different format.
Reviewed By: emaste
Approved By: brooks (mentor)
Differential Revision: https://reviews.freebsd.org/D16846
higher bandwidth interfaces. The new value is used above 2.5 Gbps,
which is the highest standard rate that could be used prior to
r338209, so the default behavior for all existing systems should
remain the same.
The value of 128 chosen is a balance between being big enough to
reduce potential precision/quantization effects stemming from frequent
bucket refills over small time intervals and being small enough to
prevent a greedy driver from burst dequeuing more packets than it has
available hardware ring slots for whenever altq transitions from idle
to backlogged.
Reviewed by: jmallett, kp
MFC after: 2 weeks
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D16852
devmatch_blacklist is a space separated list of modules (w/o the .ko
or full path) to exclude from devmatch's processing.
Differential Revision: https://reviews.freebsd.org/D16735
up the device described by the nomatch event in the device tree. If we
find it, then if the device is marked as have already attached to a
device once, then ignore the device.
This keeps us from reloading the device driver when it has just been
manually unloaded. All devies that have had a driver attach to them at
least once no longer participate in pnp-based autoloading.
Differential Revision: https://reviews.freebsd.org/D16735
This flag is set once the device has been successfully attached. When
set, it inhibits devmatch from trying to match the device. This in
turn allows kldunload to work as expected. Prior to the change, the
driver would immediately reload because devmatch had no notion that
the driver had once been attached, and therefore shouldn't participate
in further matching.
Differential Revision: https://reviews.freebsd.org/D16735
This backs out the hack we added in r329458. Now that we can freeze /
thaw probing, this is a much better solution to that problem. Revert
to simply printing the results as we find them, and relying on an
external sort | uniq to clean up the list.
Differential Revision: https://reviews.freebsd.org/D16735
Use devctl freeze / thaw to allow us to laod multiple modules before
doing the probe/attach so they all get a bite at the apple.
Differential Revision: https://reviews.freebsd.org/D16735
- Some overly-long lines
- Consistently using .Brq ({})
- Consistently using .Cm
- Not using .Ao/.Ac around .Ar
PR: 230576
Submitted by: Yuri Pankov (with a fair amount of rebasing pre-commit)
Add a -U flag to get back the old behavior. The new behavior is a little
more friendly to the common use cases, jail the BE and execute a script.
Having the jail torn down automatically when the script is finished, or when
you exit the shell, is a little more friendly than having to remember to
`bectl ujail`.
Batch mode (-b) will continue to leave the jail up, as it's assumed the
caller has other intentions.
Submitted by: Shawn Webb (partially)
2^32 bps or greater to be used. Prior to this, bandwidth parameters
would simply wrap at the 2^32 boundary. The computations in the HFSC
scheduler and token bucket regulator have been modified to operate
correctly up to at least 100 Gbps. No other algorithms have been
examined or modified for correct operation above 2^32 bps (some may
have existing computation resolution or overflow issues at rates below
that threshold). pfctl(8) will now limit non-HFSC bandwidth
parameters to 2^32 - 1 before passing them to the kernel.
The extensions to the pf(4) ioctl interface have been made in a
backwards-compatible way by versioning affected data structures,
supporting all versions in the kernel, and implementing macros that
will cause existing code that consumes that interface to use version 0
without source modifications. If version 0 consumers of the interface
are used against a new kernel that has had bandwidth parameters of
2^32 or greater configured by updated tools, such bandwidth parameters
will be reported as 2^32 - 1 bps by those old consumers.
All in-tree consumers of the pf(4) interface have been updated. To
update out-of-tree consumers to the latest version of the interface,
define PFIOC_USE_LATEST ahead of any includes and use the code of
pfctl(8) as a guide for the ioctls of interest.
PR: 211730
Reviewed by: jmallett, kp, loos
MFC after: 2 weeks
Relnotes: yes
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D16782
This is related to pkgbase as it uses CONFS to properly tag these as config
files.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16785
Rely on the kernel to appropriately mark group members as skipped.
Once a group is skipped we can clear the update flag on all the members.
PR: 229241
Submitted by: Andreas Longwitz <longwitz AT incore.de>
MFC after: 1 week
The original NVMe API used bit-fields to represent fields in data
structures defined by the specification (e.g. the op-code in the command
data structure). The implementation targeted x86_64 processors and
defined the bit fields for little endian dwords (i.e. 32 bits).
This approach does not work as-is for big endian architectures and was
changed to use a combination of bit shifts and masks to support PowerPC.
Unfortunately, this changed the NVMe API and forces #ifdef's based on
the OS revision level in user space code.
This change reverts to something that looks like the original API, but
it uses bytes instead of bit-fields inside the packed command structure.
As a bonus, this works as-is for both big and little endian CPU
architectures.
Bump __FreeBSD_version to 1200081 due to API change
Reviewed by: imp, kbowling, smh, mav
Approved by: imp (mentor)
Differential Revision: https://reviews.freebsd.org/D16404
This helps with pkgbase as it switches these to using CONFS so they are
properly tagged as config files.
Approved by: will (mentor), imp
Differential Revision: https://reviews.freebsd.org/D16781
Instead of always running /bin/sh, allow the user to specify the command
to run. The jail is not removed when the command finishes. Meaning,
`bectl unjail` will still need to be run.
For example:
```
bectl jail newBE pkg upgrade
bectl ujail newBE
```
Submitted by: Shawn Webb
Obtained from: HardenedBSD (8b451014ab)
Adding batch mode to the jail `bectl(8)` subcommand enables jailing of
ZFS Boot Environments in a scriptable fashion.
Submitted by: Shawn Webb
Obtained from: HardenedBSD (9e72d1c59a and ef7b6d9e1c with minor edit)
Previous iteration of this assumed that these won't fail because we've
already setup the jail param to this point, but the allocations could still
fail in pretty bad conditions.
Admit that it's possible and return (ENOENT, EINVAL, ENOMEM, or 0) when
deleting arguments. EINVAL shouldn't happen since we're passing optarg;
which may satisfy *optarg == '\0' but never optarg == NULL.
CID: 1394885, 1394901
after opening the console, replacing init as PID 1.
From the user point of view, it makes it possible to run eg the
shell as PID 1, using 'set init_exec=/bin/sh' at the loader(8)
prompt.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16625
These were previously necessary because the libnvpair and libzfs_core
includes were not installed into the SYSROOT, being a part of the copies
target in include/Makefile rather than being installed with the library.
This was fixed in r337696 and the headers are now installed properly, so we
may let go of the cruft.
Deleting the temp snapshot isn't immediately possible because it's the
origin of the newly imported boot environment. However, this is trivially
solved by opening the new boot environment and promoting it. The roles are
now reversed and the temp snapshot/dataset may be completely destroyed.
Remove the BUGS from libbe(3) and bectl(8).
bectl(8) is an administrative interface for working with ZFS boot
environments, intended to provide a superset of the functionality provided
by sysutils/beadm.
libbe(3) is the back-end library that the required functionality has been
pulled out into for later reuse.
These were originally written for GSoC 2017 under the mentorship of
allanjude@.
bectl(8) has proven pretty stable in my testing, with the known bug
documented in the man page.
Relnotes: yes
- Missing include path
- Fully specify libzfs's dependencies (except for deps pulled in by other
deps) in Makefile.inc1
- Drop WARNS back down to 2 for libbe(3). I do this with much hesitation,
but the libzfs headers are apparently a hot warning-filled mess as far as
GCC 4.2 is concerned.
Fix bug introduced in r98542: previously to this revision the byte-swapped
value was compared at this place. The current check is in a conditional
section where the non-byte-swapped value was already checked to be not
the value which is checked again. As byte-swapping is activated afterwards,
it only makes sense if the byte-swapped value is checked.
Submitted by: Keith White <kwhite@site.uottawa.ca>
PR: 200059
MFC after: 1 month
Sponsored by: Essen Hackathon
This helps with pkgbase to tag this config file as a config file.
Approved by: allanjude (mentor), will (mentor)
Differential Revision: https://reviews.freebsd.org/D16559
This helps pkgbase as this config file will now be tagged as a config file.
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D16675
Regardless if a verbose scan is required or not, we'd still want to display the
full SSID name by default so use the IEE80211_NWID_LEN constant to set the
value to use instead.
Tested on rene@'s laptop.
Reviewed by: kp
Sponsored by: Essen Hackathon
Differential Revision: https://reviews.freebsd.org/D16566
It's useful for how to mount an iso file via loopback.
Reviewed by: jilles
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D16067
The mostly-undocumented 'add' functionality, from initial read-through, is
intended for construction of deep ("bdrewery style") boot environments.
However, it's mostly broken at this point. `#if SOON` it out on both sides
so that we're not exposing a broken API/feature.
Work will resume on it in due time.
returns error.
Now -q option only makes it quiet. And when -f flag is specified, the
command will ignore errors and continue executing with next batched
command.
MFC after: 2 weeks
nonexistent NAT instance or nonexistent rule.
This allows execute batched `delete` commands and do not fail when
found nonexistent rule.
Obtained from: Yandex LLC
MFC after: 2 weeks
Sponsored by: Yandex LLC
getfsstat(2) system call using the MNT_NOWAIT flag to indicate that
it wants to use the statfs information cached in the mount structure.
When the -v (verbose) flag is specified, we need to use the MNT_WAIT
flag to getfsstat(2) so that kernel will call VFS_STATFS to get the
current statfs statistics from each filesystem.
Sponsored by: Netflix
The _Noreturn is a function-specifier (like inline) which must preceed
the declarator.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 1 week
This is needed to be able to chroot in the fallback case where
Capsicum is not available.
Reported by: Daniel Braniss <danny@cs.huji.ac.il>
X-MFC with: r337382
Sponsored by: The FreeBSD Foundation
- File names don't necessarily need to be repeated
- Add SPDX tags
- Add a missing copyright for Kyle Kneitinger in bectl.8, originally written
by him in GSoC 2017; his standard copyright notice has been copied from
other files within the same directory to remain consistent with how he
clearly wished to portray it
This makes the be_exists behavior match the comments that assert that we've
already checked that the dataset derived from the BE name is set to mount at
/.
Other changes of note:
- bectl_list sees another change; changing mountpoint based on mount status
turns out to be a bad idea, so instead make the mounted property of the
returned nvlist the path that it's mounted at
- Always return the "mountpoint" property in "mountpoint" if it's ste
This is to accomodate a later change in libbe(3) that will always return the
mountpoint, whether it be the directory the dataset is actively mounted at
or the "mountpoint" property.
The main dhclient process is Capsicumized but also chroots to
restrict filesystem access. With r322369, pidfile(3) maintains a
directory descriptor for the pidfile, which can cause the chroot
to fail in certain cases. To minimize the problem, only chroot
if we fail to enter capability mode, and store dhclient pidfiles
in a subdirectory of /var/run, thus restricting access via
pidfile(3)'s directory descriptor.
PR: 223327
Reviewed by: cem, oshogbo
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D16584
While here:
- Remove deprecated ".Tn" macros.
- Improve formatting and fix typos in the description of
the -t option.
Reviewed by: bcr
Approved by: mat (mentor)
Differential Revision: https://reviews.freebsd.org/D16541
- Support passing arbitrary jail arguments via -o
- Split the related (and rewritten since the GSoC) jail bits out into a new
bectl_jail.c file, to reduce clutter in bectl.c
- Don't use RFC 1918 IP space [0]; we'll instead set no default IPv4 and let
the user pass in any address options they wish via -o
Reported by: rgrimes [0], Shawn Webb [0]
be_get_dataset_snapshots has been added to libbe(3), effectively returning
the same information as be_get_bootenv_props but for snapshots of the given
dataset. The assumption is that one will have the BE dataset name before
wanting to grab snapshots.
This also accomplishes the following:
- Proxy through zfs_nicenum as be_nicenum, because it looks better than
humanize_number and would presumably be useful to other libbe consumers.
- Rename be_get_snapshot_props to be_get_dataset_props, make it more useful
-H is for a scripted format, where all fields are tab-delimited and the
headers go away. We accomplish this by splitting out pad printing to a
separate function that'll take into account whether we're supposed to be
scripted or not.
This has the nice side effect of maintaining positive column sizes again.
scripts. This means one should be able to eg rewrite their /etc/rc
in Python.
Reviewed by: kib
MFC after: 2 weeks
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16565
While it could be preferred to do this at insert in libbe(3), there's no
convenient way to insert at the head of an nvlist. Instead, we'll make two
passes over- once to print anything active either now or at nextboot, and
another to print everything else.
This doesn't actually impact performance in a significant way here, so we'll
worry about further optimizations if the need actually arises.
bectl list -a should show the boot environment, its relevant dataset, and
the snapshot it was created from. The header also changes to indicate the
rough order in which these things will show.
While here, start doing a little bit of spring cleaning and splitting
different bits out.
The timespecadd(3) family of macros were imported from NetBSD back in
r35029. However, they were initially guarded by #ifdef _KERNEL. In the
meantime, we have grown at least 28 syscalls that use timespecs in some
way, leading many programs both inside and outside of the base system to
redefine those macros. It's better just to make the definitions public.
Our kernel currently defines two-argument versions of timespecadd and
timespecsub. NetBSD, OpenBSD, and FreeDesktop.org's libbsd, however, define
three-argument versions. Solaris also defines a three-argument version, but
only in its kernel. This revision changes our definition to match the
common three-argument version.
Bump _FreeBSD_version due to the breaking KPI change.
Discussed with: cem, jilles, ian, bde
Differential Revision: https://reviews.freebsd.org/D14725
from being installed in the correct directory.
Resurrect a few rc.d scripts that were prematurely deleted from the
Makefile by r336845.
Reviewed by: brd
This keeps most startup scripts as CONFS per discussion on src-committers from
back during BSDCan.
Approved by: will (mentor)
Differential Revision: https://reviews.freebsd.org/D16466