This code was trying to use a pointer value for st_dev, which is definitely
not a pointer. Instead, cast to uintptr_t so it becomes a non-pointer value
before casting it.
Tested: mips-gcc cross compile, mips32 build
On my Dell Latitude 7390 laptop, the brightness hotkeys
(Fn+<up/down arrow>) send ACPI notifications which acpi_video
handles by adjusting its brightness setting; but ACPI does not
actually do anything with the backlight.
Announcing brightness changes via devd makes it possible to close
the loop by triggering the intel_backlight utility to perform the
required backlight adjustment.
Reviewed by: imp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D24424
Use AUXARGS_ENTRY_PTR to export these pointers. This is a followup to
r359987 and r359988.
Reviewed by: jhb
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24446
mb_reclaim() calls the protocol drain routines for each protocol in each
domain. Some protocols exist in more than one domain and share drain
routines. In the case of SCTP, it also uses the same drain routine for
its SOCK_SEQPACKET and SOCK_STREAM entries in the same domain.
On systems with INET, INET6, and SCTP all defined, mb_reclaim() calls
sctp_drain() four times. On systems with INET and INET6 defined,
mb_reclaim() calls tcp_drain() twice. mb_reclaim() is the only in-tree
caller of the pr_drain protocol entry.
Eliminate this duplication by ensuring that each pr_drain routine is only
specified for one protocol entry in one domain.
Reviewed by: tuexen
MFC after: 2 weeks
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D24418
Name each pcib driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/pcib from kernel; already loaded from kernel
One of the goals of the new routing KPI defined in r359823 is to
entirely hide`struct rtentry` from the consumers. It will allow to
improve routing subsystem internals and deliver more features much faster.
This change is one of the ongoing changes to eliminate direct
struct rtentry field accesses.
Additionally, with the followup multipath changes, single rtentry can point
to multiple nexthops.
With that in mind, convert rti_filter callback used when traversing the
routing table to accept pair (rt, nhop) instead of nexthop.
Reviewed by: ae
Differential Revision: https://reviews.freebsd.org/D24440
Name each ehci driver uniquely.
This remove the warning printed at each arm boot :
module_register: cannot register simplebus/ehci from kernel; already loaded from kernel
A similar fix was done in r333074 but imx_ehci wasn't renamed and generic_ehci wasn't
present at that time.
Permit instruction decoding logic to be compiled outside of the kernel for
rapid iteration and validation.
Reviewed by: grehan
Differential Revision: https://reviews.freebsd.org/D24439
While here, add a makefile in sys/modules/allwinner so it is built.
Also add the PNP info so devmatch will load this module automatically.
MFC after: 1 month
prison0's hostuuid will get set by the hostid rc script, either after
generating it and saving it to /etc/hostid or by simply reading /etc/hostid.
Some things (e.g. arbitrary MAC address generation) may use the hostuuid as
a factor in early boot, so providing a way to read /etc/hostid (if it's
available) and using it before userland starts up is desirable. The code is
written such that the preload doesn't *have* to be /etc/hostid, thus not
assuming that there will be newline at the end of the buffer or even the
exact shape of the newline. White trailing whitespace/non-printables
trimmed, the result will be validated as a valid uuid before it's used for
early boot purposes.
The preload can be turned off with hostuuid_load="NO" in /boot/loader.conf,
just as other preloads; it's worth noting that this is a 37-byte file, the
overhead is believed to be generally minimal.
It doesn't seem necessary at this time to be concerned with kern.hostid.
One does wonder if we should consider validating hostuuids coming in
via jail_set(2); some bits seem to care about uuid form and we bother
validating format of smbios-provided uuid and in-fact whatever uuid comes
from /etc/hostid.
Reviewed by: karels, delphij, jamie
MFC after: 1 week (don't preload by default, probably)
Differential Revision: https://reviews.freebsd.org/D24288
Stop attempting to use FADT legacy hardware flag, it is almost always
a lie.
Instead, unless user explicitly disabled the calibration, calibrate
against 8254 ISA clock. Then, obtain the rough value of the expected
TSC frequency from CPUID leafs 0x15/0x16 or even from the CPU
marketing name string. If calibration results look unbelievably bogus
comparing with CPUID leafs report, use CPUID one.
Intel does not recommend to use CPUID leaf 0x16 for the value of the
system time frequency, indeed the error there might be up to 1% which
e.g. makes ntpd give up. If ISA clock is present, we win, if not, we
get some frequency that allows the machine to boot without enormous
delay.
Next improvement would be to use HPET for re-calibration if we decided
that ISA clock gives bogus results, after HPETs are enumerated. This
is a much bigger change since we probably would need to re-evaluate
some constants depending on TSC frequency.
Reviewed by: emaste, jhb, scottl
Tested by: scottl
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D24426
I missed the "atomic" field of the RemoveExtendedAttribute operation's
reply when I implemented it. It worked between FreeBSD client and server,
since it was missed for both, but it did not conform to RFC 8276.
This patch adds the field for both client and server.
Thanks go to Frank for doing interoperability testing of the extended
attribute support against patches for Linux.
Submitted by: Frank van der Linden <fllinden@amazon.com>
Reported by: Frank van der Linden <fllinden@amazon.com>
Fix bots after a9ad65a2b34f
In the last commit, I neglected to initialize the new subtarget
feature I added which caused failures on a few bots. This should fix
that.
This unbreaks the build after r359981, which reverted upstream commit
a9ad65a2b34f.
Reported by: jhibbits (and jenkins :)
MFC after: 6 weeks
X-MFC-With: 358851
Default moea64_bpvo_pool_size 327680 was insufficient for initial
memory mapping at boot time on systems with, for example, 64G and
no huge pages enabled.
Submitted by: Andre Silva <afscoelho@gmail.com>
Reviewed by: jhibbits, alfredo
Approved by: jhibbits (mentor)
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D24102
This saves a system call and avoids one of the (relatively rare) cases
of the kernel exporting pointers via sysctl.
As a temporary measure, keep the sysctl support to allow limited
compatability with old kernels.
Fail gracefully if ps_strings can't be found (should never happen).
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24407
This will be used by setproctitle().
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24407
This simplifies discovery of these values, potentially with reducing the
number of syscalls we need to make at runtime. Longer term, we wish to
convert the startup process to pass an auxargs pointer to _start() and
use that rather than walking off the end of envv. This is cleaner,
more C-friendly, and for systems with strong bounds (e.g. CHERI)
necessary.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24407
As the name implys, it uses the a_ptr member of the auxarg entry (except
in compat32 where it uses a_val). This is more correct and required for
systems where a_val is not the same size or hardware type as a_ptr (e.g.
CHERI).
This is a prepratory commit for D24407.
Reviewed by: kib
Obtained from: CheriBSD
Sponsored by: DARPA
KTLS uses the flowid to distribute software encryption tasks among its
pool of worker threads. Without this change, all software KTLS
requests for TOE sockets ended up on the first worker thread.
Note that the flowid for TOE sockets created via connect() is not a
hash of the 4-tuple, but is instead the id of the TOE pcb (tid). The
flowid of TOE sockets created from TOE listen sockets do use the
4-tuple RSS hash as the flowid since the firmware provides the hash in
the message containing the original SYN.
Reviewed by: np (earlier version)
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24348
This fixes a panic when unloading and reloading t4_tom.ko since the
old pointer is still stored when t4_tom_load tries to set it.
Reviewed by: np
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D24358
[PowerPC] Change default for unaligned FP access for older subtargets
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=40554
Some CPU's trap to the kernel on unaligned floating point access and
there are kernels that do not handle the interrupt. The program then
fails with a SIGBUS according to the PR. This just switches the
default for unaligned access to only allow it on recent server CPUs
that are known to allow this.
Differential revision: https://reviews.llvm.org/D71954
This upstream commit causes a compiler hang when building certain ports
(e.g. security/nss, multimedia/x264) for powerpc64. The hang has been
reported in https://bugs.llvm.org/show_bug.cgi?id=45186, but in the mean
time it is more convenient to revert the commit.
Requested by: jhibbits
MFC after: 6 weeks
X-MFC-With: 358851
This makes the naming annoyance (validate_uuid vs. parse_uuid) less of an
issue and centralizes all of the functionality into the new KPI while still
making the extra validation optional. The end-result is all the same as far
as hostuuid validation-only goes.
This pattern is used in callbacks with void * data arguments and seems
both relatively uncommon and relatively harmless. Silence the warning
by casting through uintptr_t.
This warning is on by default in Clang 11.
Reviewed by: arichardson
Obtained from: CheriBSD (partial)
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24425
Rather then using the racy useracc() followed by direct access to
userspace memory, perform a copyin() and use the result if it succeeds.
Reviewed by: jhb
MFC after: 3 weeks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24410
The sshd service is using ssh-keygen to generate missing SSH keys.
If ssh-keygen is missing, it prints the following message:
> /etc/rc.d/sshd: WARNING: /usr/bin/ssh-keygen does not exist.
It makes sense when the key is not generated yet and
cannot be created because ssh-keygen is missing.
The problem is that even if the key is present on the host,
the sshd service would still warn about missing ssh-keygen
(even though it does not need it).
Reviewed by: emaste
Approved by: emaste (src)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D23911
