The interface already guarantees that the number of hypercall pages is
always going to be 1, see the comment in interface/arch-x86/cpuid.h
Sponsored by: Citrix Systems R&D
lock order reversal: (sleepable after non-sleepable)
1st 0xfffffe00357ff538 xnb_softc (xen netback softc lock) @ /usr/src/sys/dev/xen/netback/netback.c:1069
2nd 0xffffffff81fdccb0 intrsrc (intrsrc) @ /usr/src/sys/x86/x86/intr_machdep.c:224
There's no need to hold the lock since the cleaning of the interrupt
cannot happen in parallel due to the XNBF_IN_SHUTDOWN flag being set.
Note that the locking in netback needs some improvement or
clarification.
While there also remove a double newline.
Sponsored by: Citrix Systems R&D
As previously noted, kernel's processing of these means that the first
appearance of a hint/variable wins. Flipping the order of concatenation
means that later variables override earlier variables, as expected when one
does:
hints x
hints y
Where perhaps x is:
hint.aw_sid.0.disable=1
and y is:
hint.aw_sid.0.disable=0
The expectation would be that a later appearing variable would override an
earlier appearing variable, such as with `device`/`nodevice`, device.hints,
and other similarly structured data files.
Previously, only one 'env' file could be specified. Later 'env' directives
would overwrite earlier 'env' directives. This is inconsistent with every
other file-accepting directives which process files in order, including
hints.
A caveat applies to both hints and env that isn't mentioned: they're
concatenated in the order of appearance, so they're not actually applied in
the way one might think by supplying:
hints x
hints y
Hints in x will take precedence over same-name hints in y due to how
the kernel processes them, stopping at the first line that matches the hint
we're searching for. Future work will flip the order of concatenation so
that later files may still properly override earlier files.
In practice, this likely doesn't matter at all due to the nature of the
beast.
The reference counting that's done in the geom_vfs layer to prevent
delivery of requests to defunct devices only works if all requests go
through that layer. UFS was bypassing that layer for BIO_DELETE requests,
sending them to the geom_consumer directly with g_io_request. Allocate
a buf, fill it in, and call strategy on it instead.
Submitted by: Chuck Silvers
Reviewed by: scottl, imp, kirk
Sponsored by: Netflix
Differential: https://reviews.freebsd.org/D15456
the Linuxulator. We need to translate error values onto Linux errno values
and return them to userspace when a syscall fails. We also need to preserve
x1 as all registers are preserved other than the return value.
Reviewed by: emaste
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D16008
Summary: In r220638, stoppcbs started being tracked. This never got exposed to
ddb though, so kdb_thr_ctx() didn't know how to look them up.
This allows switching to threads on stopped CPUs in kdb.
Submitted by: Brandon Bergren <git_bdragon.rkt0.net>
Differential Revision: https://reviews.freebsd.org/D15986
The arm64 linuxulator needs different arguments for the objcopy
invocation used to build the linux VDSO. These arguments are both arch-
and OS-dependent, so I did not try to use some common setting for them.
Reviewed by: imp
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D16011
Rather then combining hardlink creation for the geom(8) binary with
shared library build, move libraries to src/lib/geom so they are
built and installed normally. Create a common Makefile.classes
which is included by both lib/geom/Makefile and sbin/geom/Makefile
so the symlink and libraries stay in sync.
The relocation of libraries allows libraries to be build for 32-bit
compat. This also reduces the number of non-standard builds in
the system.
This commit is not sufficent to run a 32-bit /sbin/geom on a 64-bit
system out of the box as it will look in the wrong place for libraries
unless GEOM_LIBRARY_PATH is set appropriatly in the environment.
Reviewed by: bdrewery
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15360
envvar allows adding individual environment variables to the kernel's static
environment without the overhead of pulling in a full file. envvar in a
config looks like:
envvar some_var=5
All envvar-provided variables will be added after the env file is processed,
so envvar keys that exist in the previous env will be overwritten by
whatever value is set here in the kernel configuration directly.
As an aside, envvar lines are intentionally tokenized differently from
basically every other line. We used a named state when ENVVAR is encountered
to gobble up the rest of the line, which will later be cleaned and validated
in post-processing by sanitize_envline. This turns out to be the simplest
and cleanest way to allow the flexibility that kenv does while not
compromising on silly hacks.
Reviewed by: ian (also contributor of sanitize_envline rewrite)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D15962
The local hostname was blindly copied into the to the nn_name array.
When the hostname exceeded 16 bytes, it would overflow. Truncate the
hostname to 15 bytes plus a 0 terminator which is the "workstation name"
suffix.
Use defensive strlcpy() when filling nn_name in all cases.
PR: 228354
Reported by: donald.buchholz@intel.com
Reviewed by: jpaetzel, ian (prior version)
Discussed with: Security Officer (gtetlow)
MFC after: 3 days
Security: Stack overflow with the hostname.
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15936
This is sufficient to run Linux arm64 'hello world' and other simple
binaries.
Reviewed by: andrew
Sponsored by: Turing Robotic Industries
Differential Revision: https://reviews.freebsd.org/D15834
without error code. Doing so it mis-aligned the stack.
Since the only consumer of the SSE instructions with the alignment
requirements is AES-NI module, and since the FPU context cannot be
accessed in interrupts, the only situation where the alignment matter
are the compat32 syscalls, as reported in the PR.
PR: 229222
Reported and tested by: dewayne@heuristicsystems.com.au
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
devices present.
On at least one machine where it would matter since the ISA timer is
power gated when booted in the UEFI mode, BIOS still reports that the
legacy devices are present. That is, user still have to manually
disable TSC calibration on such machines. Hopefully it will be more
useful in the future.
Discussed with: Ben Widawsky <benjamin.widawsky@intel.com>
Reviewed by: royger
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D16004
MFC after: 1 week
To workaround buggy firmware that sets this flag when there's actually
a VGA present.
Reported and tested by: Yasuhiro KIMURA <yasu@utahime.org>
Sponsored by: Citrix Systems R&D
Reviewed by: kib
Differential revision: https://reviews.freebsd.org/D16003
A more correct way to modernize code that uses __progname is to just
replace each occurance of it with a call to getprogname(3)
Reported by: ian
Reviewed by: imp
be executed in the if() conditional. If its not supposed to be printed
inside the conditional, then the braces should be removed and the extra
tabs on the fprintf() should be removed.
Noted by cross compilation with gcc-mips.
SVN r280384 updated the maximum password length from 16 bytes to 255. The
manual was not updated to reflect this. Found while working on kern/207069.
MFC after: 3 days
X-MFC-to: stable/11 stable/10
Sponsored by: Smule, Inc.
- add static in a number of places
- initialize __progname rather than rely on magical extern values
- use nitems() instead of manually spelling it out
- unshadow 'idi'
- teach 'error' that it is '__dead2'
- add missing 'break'
Allocation explicitely initialized the 3 leading fields. The rest is an
array which is supposed to be NULL-ed prior to deallocation.
Delegate zeroing to the infrequently called object initializator.
This gets rid of one of the most common memset consumers.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D15989
- remove param: unused since r95357.
- correct definition of usage
- add explicit fallthrough notice. The existing one doesn't work with
our selection of "implicit-fallthrough" strictness.
This results in WARNS=6 building on amd64, but not other arches
It is no longer necessary to specify a -4/-6 flag on any ntp.conf
keyword. The address type is inferred from the address itself as
necessary. "restrict default" statements always apply to both address
families regardless of any -4/-6 flag that may be present.
So this change just tidies up our default config by removing the redundant
restrict -6 statement and comment, and by removing the -6 flag from the
restrict keyword that allows access from localhost.
This change was inspired by the patches provided in PRs 201803 and 210245,
and included some contrib/ntp code inspection to verify that the -4/-6
keywords are basically no-ops in all contexts now.
PR: 201803 210245
Differential Revision: https://reviews.freebsd.org/D15974
and set up the hardware accordingly on each transfer. This replaces the old
configuration done via sysctl, and allows both fdt configuration data and
userland control via the spigen device to work.
Submitted by: Bob Frazier
Differential Revision: https://reviews.freebsd.org/D15031
