Looking pretty good; this mostly works now. New code includes:
* Read cached entropy at startup, both from files and from loader(8) preloaded entropy. Failures are soft, but announced. Untested.
* Use EVENTHANDLER to do above just before we go multiuser. Untested.
been tested. With all sources turned on, this unlocks itself in
a couple of seconds! That is no my box, and there is no guarantee
that this will be the case everywhere.
* Cut debug prints.
* Use the same locks/mutexes all the way through.
* Be a tad more conservative about entropy estimates.
Simplify the malloc pools; We only need one for this device.
Simplify the harvest queue.
Marginally improve the entropy pool hashing, making it a bit faster in the process.
Connect up the hardware "live" source harvesting. This is simplistic for now, and will need to be made rate-adaptive.
All of the above passes a compile test but needs to be debugged.
these.
The mux-vcpus option may return at some point, given it's utility
in finding bhyve (and FreeBSD) bugs.
Approved by: re@ (blanket)
Discussed with: neel@
Sort the filenames to get a consistent result between machines of the same
architecture.
Also, sort FTS_D entries after other entries so kldxref -R works properly in
the uncommon case that a directory contains both subdirectories and modules.
Previously, this may have happened to work, depending on the order of files
in the directory.
PR: bin/182098
Submitted by: Derek Schrock (original version)
Tested by: Derek Schrock
Approved by: re (delphij)
MFC after: 1 week
https://wiki.freebsd.org/SummerOfCode2013/bhyveAHCI
This provides ICH8 SATA disk and ATAPI ports, selectable
via the bhyve slot command-line parameter:
SATA
-s <slot>,ahci-hd,<image-file>
ATAPI
-s <slot>,ahci-cd,<image-file>
Slight modifications by: grehan@
Approved by: re@ (blanket)
Obtained from: FreeBSD GSoC'13
architectures where they are known not to work. For SVN itself, use
the least common denominator and disable them across the board. This
allows svnlite to build and run on all FreeBSD architectures.
Approved by: re (gjb)
The changes are to:
* Use contigmalloc/contigfree which handling microcode buffer
* Use a different buffer to send microcode to each engine
* Swap microcode in little-endian compilation
* Fix freeback message queue id field
* Simplify xlp_get_rsa_opsize() to remove unnecessary checks
* Fix NULL check after use in xlp_free_cmd_params()
* Do better error handling when the hardware returns error
* Fix error codes in few cases
Submitted by: Vekatesh J. V. <venkatesh.vivekanandan@broadcom.com>
Approved by: re (hrs)
Updates to the Netlogic XLP on-chp RSA block driver. The changes are
to follow style(9) guidelines, to improve readability and to remove
unnecessary initialization.
No changes to logic have been introduced by this commit.
Submitted by: Venkatesh J. V. <venkatesh.vivekanandan@broadcom.com>
Approved by: re (hrs)
Contains:
* Refactor the hardware RNG CPU instruction sources to feed into
the software mixer. This is unfinished. The actual harvesting needs
to be sorted out. Modified by me (see below).
* Remove 'frac' parameter from random_harvest(). This was never
used and adds extra code for no good reason.
* Remove device write entropy harvesting. This provided a weak
attack vector, was not very good at bootstrapping the device. To
follow will be a replacement explicit reseed knob.
* Separate out all the RANDOM_PURE sources into separate harvest
entities. This adds some secuity in the case where more than one
is present.
* Review all the code and fix anything obviously messy or inconsistent.
Address som review concerns while I'm here, like rename the pseudo-rng
to 'dummy'.
Submitted by: Arthur Mesh <arthurmesh@gmail.com> (the first item)
noafif() is true. The following warning message was displayed when
pflog0 interface existed, for example:
ifconfig: ioctl(SIOCGIFINFO_IN6): Protocol family not supported
Reported by: bz
Approved by: re (gjb)
as "epair0" in $cloned_interfaces and "epair0[ab]" in the others in
rc.conf like the following:
cloned_interfaces="epair0"
ifconfig_epair0a="inet 192.168.1.1/24"
ifconfig_epair0b="inet 192.168.2.1/24"
/etc/rc.d/netif now accepts both "netif start epair0" and "netif start
epair0a".
Approved by: re (kib)
not strlen as they are *not* strings.
Discovered by GSOC student, Mike Ma <mikemandarine@gmail.com> during his
fuse.glusterfs port to FreeBSD.
Final patch from mckusick@
Submitted by: mckusick@
Approved by: re (hrs)
MFC after: 2 weeks
Add ms_abi and sysv_abi attribute handling.
Based on a patch by Benno Rice!
This will help to develop EFI support.
Approved by: re (kib)
Verified by: benno
MFC after: 1 week
Remove invalid assert in DAGTypeLegalizer::RemapValue
There is a comment at the top of DAGTypeLegalizer::PerformExpensiveChecks
which, in part, says:
// Note that these invariants may not hold momentarily when processing a node:
// the node being processed may be put in a map before being marked Processed.
Unfortunately, this assert would be valid only if the above-mentioned invariant
held unconditionally. This was causing llc to assert when, in fact,
everything was fine.
Thanks to Richard Sandiford for investigating this issue!
Fixes PR16562.
This fixes assertions which could occur in the multimedia/ffmpeg1 and
multimedia/ffmpeg2 ports.
Approved by: re (hrs)
Reported by: Matthias Apitz <guru@unixarea.de>
MFC after: 3 days
input path. These probes get some of the fields in host order, whereas the
output probes get them in network order, so a single translator isn't
enough. This workaround ensures that the problem is essentially invisble
to users: none of the probe arguments or their fields have changed.
Approved by: re (hrs)
is no sense to walk the whole dirty buffer queue. We are only
interested in, and can operate on, the buffers owned by the current
vnode [1]. Instead of calling generic queue flush routine, do
VOP_FSYNC() if possible.
Holding the dirty buffer queue lock in the bufdaemon, without dropping
it, can cause starvation of buffer writes from other threads. This is
esp. easy to reproduce on the big memory machines, where large files
are written, causing almost all dirty buffers accumulating in several
big files, which vnodes are locked by writers. Bufdaemon cannot flush
any buffer, but is iterating over the whole dirty queue
continuously. Since dirty queue mutex is not dropped, bufdone() in
g_up thread is starved, usually deadlocking the machine [2]. Mitigate
this by dropping the queue lock after the vnode is locked, allowing
other queue lock contenders to make a progress.
Discussed with: Jeff [1]
Reported by: pho [2]
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Approved by: re (hrs)
On MIPS the .dynamic section is read-only, so the pointer to rtld
information for debuggers cannot be stored there (in DT_DEBUG).
Instead, a special section .rld_map is used.
Sponsored by: DARPA, AFRL
Approved by: re (delphij)
On MIPS .dynamic is read-only and so a special section .rld_map is used
to store the pointer to the rtld information for debuggers. This
section had a hard coded size of 4 bytes which is not correct for
mips64. (Note that FreeBSD's rtld does not yet populate .rld_map.)
Sponsored by: DARPA, AFRL
Approved by: re (delphij)
