Add the machine-specific definitions for configuring the new physical
memory allocator.
Set the size of phys_avail[] and dump_avail[] using one of these
definitions.
which support a 2.5Gbps mode over fiber using next page extensions during
autonegotiation. Typically only found in blade systems which also include
a Broadcom 2.5Gbps capable switch.
MFC after: 2 weeks
oldthread should point at before we return.
- When cpu_switch() is called the td_lock pointer in the old thread may
point at the blocked lock. This prevents other processors from
switching into this thread while we're still switching out. Wait
until we're done deactivating the vmspace before we release the
thread by assigning to td_lock.
- Before we can activate the new vmspace we must make sure that the new
thread is not assigned to the blocked lock. It may be in the process
of switching out on another cpu. Spin until the new thread is
available.
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Add a new parameter to cpu_switch() that is used to release the lock on
the outgoing thread and properly acquire the lock on the incoming
thread. This parameter is not required for schedulers that don't do
per-cpu locking and architectures which do not support it may continue
to use the 4BSD scheduler. This feature is presently not supported
on ia64
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- There is no globally visible scheduler lock any longer. For now the
watchdog can only check Giant. This model of checking particular locks
is flawed and should be revisited. Other metrics should be considered.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Use sched_throw() rather than replicating the same cpu_throw() code for
each architecture. This also allows the scheduler to use any locking it
may want to.
- Use the thread_lock() rather than sched_lock when preempting.
- The scheduler lock is not required to synchronize release_aps.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Add new spinlocks to support thread_lock() and adjust ordering.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Attempt to return the ttyinfo() selection algorithm to something sane
as it has been broken and disabled for some time. Adapt this algorithm
in such a way that it does not conflict with per-cpu scheduler locking.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Use a global umtx spinlock to protect the sleep queues now that there
is no global scheduler lock.
- Use thread_lock() to protect thread state.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
- Use a global kse spinlock to protect upcall and thread assignment. The
per-process spinlock can not be used because this lock must be acquired
via mi_switch() where we already hold a thread lock. The kse spinlock
is a leaf lock ordered after the process and thread spinlocks.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
- Replace the tail-end of fork_exit() with a scheduler specific routine
which can do the appropriate lock manipulations.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Protect the cp_time tick counts with atomics instead of a global lock.
There will only be one atomic per tick and this allows all processors
to execute softclock concurrently.
- In softclock, protect access to rusage and td_*tick data with the
thread_lock(), expanding the scope of the thread lock over the whole
function.
- Do some creative re-arranging in hardclock() to avoid excess locking.
- Protect the p_timer fields with the per-process spinlock.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Use thread_lock() rather than sched_lock for per-thread scheduling
sychronization.
- Use the per-process spinlock rather than the sched_lock for per-process
scheduling synchronization.
- Move some common code into thread_suspend_switch() to handle the
mechanics of suspending a thread. The locking here is incredibly
convoluted and should be simplified.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Add a per-turnstile spinlock to solve potential priority propagation
deadlocks that are possible with thread_lock().
- The turnstile lock order is defined as the exact opposite of the
lock order used with the sleep locks they represent. This allows us
to walk in reverse order in priority_propagate and this is the only
place we wish to multiply acquire turnstile locks.
- Use the turnstile_chain lock to protect assigning mutexes to turnstiles.
- Change the turnstile interface to pass back turnstile pointers to the
consumers. This allows us to reduce some locking and makes it easier
to cancel turnstile assignment while the turnstile chain lock is held.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Adapt sleepqueues to the new thread_lock() mechanism.
- Delay assigning the sleep queue spinlock as the thread lock until after
we've checked for signals. It is illegal for a thread to return in
mi_switch() with any lock assigned to td_lock other than the scheduler
locks.
- Change sleepq_catch_signals() to do the switch if necessary to simplify
the callers.
- Simplify timeout handling now that locking a sleeping thread has the
side-effect of locking the sleepqueue. Some previous races are no
longer possible.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
- Move all scheduler locking into the schedulers utilizing a technique
similar to solaris's container locking.
- A per-process spinlock is now used to protect the queue of threads,
thread count, suspension count, p_sflags, and other process
related scheduling fields.
- The new thread lock is actually a pointer to a spinlock for the
container that the thread is currently owned by. The container may
be a turnstile, sleepqueue, or run queue.
- thread_lock() is now used to protect access to thread related scheduling
fields. thread_unlock() unlocks the lock and thread_set_lock()
implements the transition from one lock to another.
- A new "blocked_lock" is used in cases where it is not safe to hold the
actual thread's lock yet we must prevent access to the thread.
- sched_throw() and sched_fork_exit() are introduced to allow the
schedulers to fix-up locking at these points.
- Add some minor infrastructure for optionally exporting scheduler
statistics that were invaluable in solving performance problems with
this patch. Generally these statistics allow you to differentiate
between different causes of context switches.
Tested by: kris, current@
Tested on: i386, amd64, ULE, 4BSD, libthr, libkse, PREEMPTION, etc.
Discussed with: kris, attilio, kmacy, jhb, julian, bde (small parts each)
Now, we assume no more sched_lock protection for some of them and use the
distribuited loads method for vmmeter (distribuited through CPUs).
Reviewed by: alc, bde
Approved by: jeff (mentor)
- Rename PCPU_LAZY_INC into PCPU_INC
- Add the PCPU_ADD interface which just does an add on the pcpu member
given a specific value.
Note that for most architectures PCPU_INC and PCPU_ADD are not safe.
This is a point that needs some discussions/work in the next days.
Reviewed by: alc, bde
Approved by: jeff (mentor)
sysctl_handle_int is not sizeof the int type you want to export.
The type must always be an int or an unsigned int.
Remove the instances where a sizeof(variable) is passed to stop
people accidently cut and pasting these examples.
In a few places this was sysctl_handle_int was being used on 64 bit
types, which would truncate the value to be exported. In these
cases use sysctl_handle_quad to export them and change the format
to Q so that sysctl(1) can still print them.
value into a variable of the right type and then printing it via
an intmax_t. This makes avoids some duplication and makes it easy
to add a new integer format Q for printing things of type CTLTYPE_QUAD.
- In the ioctl path let command get queued up and return
when complete _without_ blocking the driving waiting for
the response. This way the driver doesn't "lock up" for
~30s during a flash command. Submitted by scottl.
- Add a guard so that if a DCMD of 0 is sent down the ioctl
path don't send it to the controller. Return with a
status of OK. This is a little strange since MegaCli
doesn't seem to like something and will issue some DCMD
of 0. This doesn't happen under Linux. So the emulation
needs to be improved but I'm not sure what. Another strange
thing is that when a DCMD of 0 gets issued under i386 the
controller returns OK but in amd64 the context is messed
up.
- Add a guard so the context has to be with-in the legal
limit so we get a reasonable error assertion versus random
panic.
It's going to be a challenge to figure out why MegaCli is not totally
happy and then sends some bogus commands. This means that flashing
firmware via the Linux tool won't work since it generates a DCMD of
0 when it should be opening the firmware for a flash update. Without
this problem flashing works fine. This means there is no publicly
available tool to upgrade the RAID firmware under FreeBSD right now.
I plan to MFC all of the mfi changes to 6.X shortly. This might not
include the SCSI pass-through changes.
Submitted by: scottl
Reviewed by: scottl
MFC after: 3 days
