to this pmap.c. This new r/w lock is used primarily to synchronize access
to the PV lists. However, it will be used in a somewhat unconventional
way. As finer-grained PV list locking is added to each of the pmap
functions that acquire this r/w lock, its acquisition will be changed from
write to read, enabling concurrent execution of the pmap functions with
finer-grained locking.
Reviewed by: kib
X-MFC after: r235598
The generic ELF loading code maps the kernel into low memory
by subtracting KERN_BASE. So the copyin/copyout/readin functions
are always called with low addresses. This code finds the largest
DRAM block from the U-Boot memory map and adds that base to
the addresses.
In particular, this fixes ubldr on AM3358, which has DRAM
mapped to 0x80000000 at power-on.
disabled or the system is in shutdown procedure.
This should fix the problem which kernel never response to the sleep
button press events after the message `suspend request ignored (not
ready yet)'.
MFC after: 3 days
range operations like pmap_remove() and pmap_protect() as well as allowing
simple operations like pmap_extract() not to involve any global state.
This substantially reduces lock coverages for the global table lock and
improves concurrency.
casted to structs by getting rid of these buffers entirely. In r169832, it
was tried to paper over this issue by 32-bit aligning the buffers. Depending
on compiler optimizations that still was insufficient for 64-bit architectures
with strong alignment requirements though.
While at it, add comments regarding the total lack of locking in this area.
Tested by: bz
Reviewed by: bz (slightly earlier version), yongari (earlier version)
MFC after: 1 week
There's some TX path TDMA code in if_ath_tx.c which should be migrated
out, but first I should likely try and verify/fix/repair the TDMA support
in 9.x and -HEAD.
* migrate the rx processing out into if_ath_rx.c
* migrate the TSF functions into if_ath_tsf.h, as inlines
This is in prepration for supporting the EDMA RX routines, required to
support the AR93xx series NICs.
TODO:
* ath_start() shouldn't be private, but it's called as part of
the RX path. I should likely migrate ath_rx_tasklet() back into
if_ath.c and then return this to be 'static'. The RX code really
shouldn't need to see TX routines (and vice versa.)
* ath_beacon_* should be in if_ath_beacon.[ch].
* ath_tdma_* should be in if_ath_tdma.[ch] ...
Allow tso4 and tso6 be set individually given we have the bits.
This will help with drivers not working as expected during the
transition time and later.
Sponsored by: The FreeBSD Foundation
Sponsored by: iXsystems
Reviewed by: gnn
MFC After: 1 week
The configuration is:
* RGMII, both ports
* arge0 - connected to PHY4 as a dedicated port (CPU port)
* arge1 - connected to the switch ports
I've verified this on my routerstation pro board.
Introduce dirfd() libc exported symbol replacing macro with same name,
preserve _dirfd() macro for internal use.
Replace dirp->dd_fd with dirfd() call. Avoid using dirfd as variable
name to prevent shadowing global symbol.
Sponsored by: Google Summer Of Code 2011
the GCC 4.1 branch and are available under GPLv2.
2007-11-07 Eric Botcazou <ebotcazou@libertysurf.fr>
PR rtl-optimization/33822
* rtl.h (REG_OFFSET): Fix comment.
* var-tracking.c (INT_MEM_OFFSET): New macro.
(var_mem_set): Use it.
(var_mem_delete_and_set): Likewise.
(var_mem_delete): Likewise.
(vt_get_decl_and_offset): Likewise.
(offset_valid_for_tracked_p): New predicate.
(count_uses): Do not track locations with invalid offsets.
(add_uses): Likewise.
(add_stores): Likewise.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=129972
2007-11-16 Richard Guenther <rguenther@suse.de>
PR middle-end/34030
* fold-const.c (fold_binary): Use correct types for folding
1 << X & Y to Y >> X & 1.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=130242
2008-01-14 Eric Botcazou <ebotcazou@adacore.com>
PR rtl-optimization/31944
* cse.c (remove_pseudo_from_table): New function.
(merge_equiv_classes): Use above function to remove pseudo-registers.
(invalidate): Likewise
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=131524
2008-01-24 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
Backport:
2007-11-07 Kenneth Zadeck <zadeck@naturalbridge.com>
PR middle-end/33826
* ipa-pure-const (static_execute): Added code to keep recursive
functions from being marked as pure or const.
* ipa-utils (searchc): Fixed comment.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=131807
2008-02-01 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
Backport:
2007-08-02 Nathan Froyd <froydnj@codesourcery.com>
PR middle-end/25445
* varasm.c (default_binds_local_p_1): Consult flag_whole_program
if we are compiling with -fPIC.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=132061
2008-02-04 Richard Guenther <rguenther@suse.de>
PR middle-end/33631
* expr.c (count_type_elements): Give for unions instead of
guessing.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=132101
2008-02-14 Alan Modra <amodra@bigpond.net.au>
PR target/34393
* config/rs6000/rs6000.md (restore_stack_block): Force operands[1]
to a reg.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=132309
2008-03-25 Richard Guenther <rguenther@suse.de>
Backport from mainline:
2008-02-12 Richard Guenther <rguenther@suse.de>
PR middle-end/35163
* fold-const.c (fold_widened_comparison): Use get_unwidened in
value-preserving mode. Disallow final truncation.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=133509
2008-11-30 Eric Botcazou <ebotcazou@adacore.com>
PR target/38287
* config/sparc/sparc.md (divsi3 expander): Remove constraints.
(divsi3_sp32): Add new alternative with 'K' for operand #2.
(cmp_sdiv_cc_set): Factor common string.
(udivsi3_sp32): Add new alternative with 'K' for operand #2.
Add TARGET_V9 case.
(cmp_udiv_cc_set): Factor common string.
http://gcc.gnu.org/viewcvs?root=gcc&view=rev&rev=142298
Reviewed by: mm
Approved by: jhb (mentor)
MFC after: 1 week
Most part is merged from amd64.
- i386/acpica/acpi_wakecode.S
Replaced with amd64 code (from realmode to paging enabling code).
- i386/acpica/acpi_wakeup.c
Replaced with amd64 code (except for wakeup_pagetables stuff).
- i386/include/pcb.h
- i386/i386/genassym.c
Added PCB new members (CR0, CR2, CR4, DS, ED, FS, SS, GDT, IDT, LDT
and TR) needed for suspend/resume, not for context switch.
- i386/i386/swtch.s
Added suspendctx() and resumectx().
Note that savectx() was not changed and used for suspending (while
amd64 code uses it).
BSP and AP execute the same sequence, suspendctx(), acpi_wakecode()
and resumectx() for suspend/resume (in case of UP system also).
- i386/i386/apic_vector.s
Added cpususpend().
- i386/i386/mp_machdep.c
- i386/include/smp.h
Added cpususpend_handler().
- i386/include/apicvar.h
- kern/subr_smp.c
- sys/smp.h
Added IPI_SUSPEND and suspend_cpus().
- i386/i386/initcpu.c
- i386/i386/machdep.c
- i386/include/md_var.h
- pc98/pc98/machdep.c
Moved initializecpu() declarations to md_var.h.
MFC after: 3 days
to the build system. FreeBSD written scripts are stored in
src/share and the toolkit scripts are brought from the cddl directory
into a working tree via install.
MFC after: 2 weeks
