This change allows one to set the busy_detect flag
required by the synopsys UART at the loader prompt.
This is needed by the EPYC 3000 SoC.
This will give users a working console up to the point where getty is required:
hw.uart.console="mm:0xfedc9000,rs:2,bd:1"
Reviewed by: imp
MFC after: 4 weeks
Differential Revision: https://reviews.freebsd.org/D16399
The change made in r336593 assumes that the build is happening in a
svn checkout resulting in misleading debug output. Check that we're
actually working in an svn checkout before proceeding to call svn.
Since r336313, TSO support for LEM-class devices is removed again as it
was before the conversion of {l,}em(4) to iflib(4) in r311849 and as a
result, isc_tx_tso_segments_max is 0 for LEM-class devices now. Thus,
inappropriate watermarks were used for this class.
This is really only a band-aid, though, because so far iflib(9) doesn't
fully take into account that DMA engines can support different maxima
of segments for transfers of TSO and non-TSO packets. For example, the
DESC_RECLAIMABLE macro is based on isc_tx_nsegments while MAX_TX_DESC
used isc_tx_tso_segments_max only. For most in-tree consumers that
doesn't make a difference as the maxima are the same for both kinds of
transfers (that is, apart from the fact that TSO may require up to 2
sentinel descriptors but also not with every MAC supported). However,
isc_tx_nsegments is 8 but isc_tx_tso_segments_max is 85 by default
with ixl(4).
tests for avail > 0, avail can never be 0 within that loop. Thus, move
decrementing avail and budget_left into the loop and before the code which
checks for additional descriptors having become available in case all the
previous ones have been processed but there still is budget left so the
latter code works as expected. [1]
- In iflib_{busdma_load_mbuf_sg,parse_header}(), remove dead stores to m
and n respectively. [2, 3]
- In collapse_pkthdr(), ensure that m_next isn't NULL before dereferencing
it. [4]
- Remove a duplicate assignment of segs in iflib_encap().
Reported by: Coverity
CID: 1356027 [1], 1356047 [2], 1368205 [3], 1356028 [4]
- Don't bother calling if_setbaudrate(9) as iflib_link_state_change(9)
takes care of that,
- correctly check for E1000_CTRL_EXT_LINK_MODE_GMII in E1000_CTRL_EXT [1],
- properly convert the uint16_t link_speed to a uint64_t baudrate by
using IF_Mbps() which contains an appropriate cast [2],
- remove the duplicate link down announcement when bootverbose isn't
zero and bring the remaining one in line with the other link state
messages.
o Remove a dead store to rid in em_if_msix_intr_assign(). [3]
o Or in the DMA coalescing Rx threshold so the other bits set in E1000_DMACR
remain intact as intended in igb_init_dmac(). [4]
Reported by: Coverity
CID: 1378464 [1], 1368765 [2], 1381681 [3], 1304929 [4]
Some of the changes are in the libexec/tftpd directory, but to functions that
are only used by tftp(1) (they share some code).
* strcpy => strlcpy (1006793, 1006794, 1006796, 1006741)
* Unchecked return value and TOCTTOU (1009314)
* NULL pointer dereference (1018035, 1018036)
Reported by: Coverity
CID: 1006793, 1006794, 1006796, 1006741, 1009314, 1018035
CID: 1018036
MFC after: 2 weeks
These syscalls were always supposed to have been auditted, but due to
oversights never were.
PR: 228374
Reported by: aniketp
Reviewed by: aniketp
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16388
Now that multiple providers can be attached at once, exit codes and
error messages must be handled correctly if there are failures in on
any of the providers.
Reported by: asomers (Kyua test failures via continuous integration)
Reviewed by: asomers
Approved by: allanjude
Differential Revision: https://reviews.freebsd.org/D16386
This is needed with new u-boot that uses the rpi-firmware dtbs.
Reviewed by: gjb
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16240
This reduce the per-board arm_install_uboot to just install u-boot.
While here remove the installation of rpi.dtb and rpi2.dtb as we load
them from the UFS partition via ubldr.
Reviewed by: gjb, imp (older version)
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D16239
Ensure that the TCP connections are terminated gracefully as expected
by the test. Use appropriate numbers for sent/received packets.
In addition, enable tst.localtcpstate.ksh, which should pass, but
doesn't until https://reviews.freebsd.org/D16369 is committed.
Reviewed by: markj@
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D16288
When ABE was added (rS331214) to NewReno and leak fixed (rS333699) , it now has
a destructor (newreno_cb_destroy) for per connection state. Other congestion
controls may allocate and free cc_data on entry and exit, but the field is
never explicitly NULLed if moving back to NewReno which only internally
allocates stateful data (no entry contstructor) resulting in a situation where
newreno_cb_destory might be called on a junk pointer.
- NULL out cc_data in the framework after calling {cc}_cb_destroy
- free(9) checks for NULL so there is no need to perform not NULL checks
before calling free.
- Improve a comment about NewReno in tcp_ccalgounload
This is the result of a debugging session from Jason Wolfe, Jason Eggleston,
and mmacy@ and very helpful insight from lstewart@.
Submitted by: Kevin Bowling
Reviewed by: lstewart
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D16282
This code was originally written for NetBSD. r306031 tried to adapt it to
FreeBSD, but didn't correctly handle the case that tmpfs was available, but
not already loaded. Fix the logic to load the module if necessary. The
tmpfs tests shouldn't be skipped anymore.
Also, fix a comment that was dislocated by r306031.
Reported by: Jenkins
MFC after: 2 weeks
and revision number announced in SNS notifications about new EC2 AMIs.
While I'm here, incorporate that information into the AMI "description"
fields, since it's more useful than simply echoing the information
already provided via the AMI "name".
Approved by: gjb
We've got a set of probably damaged hard disks, reporting 0x04,0x02
("Logical unit not ready, initializing command required") in response
to READ CAPACITY(16), where attempts to use START STOP UNIT for recovery
results in 0x44,0x00 ("Internal target failure") after ~1 second delay.
As result of all recovery retries, device open attempt took ~3 seconds
before finally reporting to GEOM that device is opened, but has no media.
If the open was for writing and since it hasn't formally failed, following
close triggered GEOM retaste, opening device few more times with respective
delays.
This change reduces whole time of this cycle from ~12 seconds to ~3 by
giving up on recovery after the first failure.
Reviewed by: ken
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
In r321967 ngie "fixed" these tests by changing their expectations to match
the device numbers produced by the new ino64 code. But it wasn't the tests
that were broken, it was the kernel. bde fixed the kernel in r335053.
Reported by: Jenkins
MFC after: Never (only applies to >= 12)
tftpd(8) should flush a newly written file to disk before ACKing the final DATA
packet. Otherwise there is a narrow race window when a subsequent read may not
see the file. This is somewhat related to r330710, but the race window is much
smaller. Hopefully this will fix the intermittent tests in Jenkins.
Reported by: Jenkins
MFC after: 2 weeks
It turns out that my username (0mp) is not a valid ID in the DOT language
because it starts with a digit. The easiest way to fix it is to put my
username in double quotes.
Reported by: pstef
Reviewed by: krion (mentor)
Approved by: krion (mentor)
Differential Revision: https://reviews.freebsd.org/D16372
linux(4) explicitly states that it is not an emulator.
While here, pet mandoc and igor.
Reviewed by: mat (mentor), rpokala
Approved by: manpages (rpokala), mat (mentor)
Differential Revision: https://reviews.freebsd.org/D16375
Fix two failing makefs test cases by adding "-M 1m", which was already used
for every other FFS test case. Add a new test case for the underlying
issue: with no -M, -m, or -s options, makefs can underestimate image size.
PR: 229929
Reported by: Jenkins
MFC after: 2 weeks
These three syscalls aren't currently audited correctly, so the tests are
marked as expected failures.
PR: 228374
Submitted by: aniketp
MFC after: 2 weeks
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D16379
auditon(2) is an ioctl-like syscall with several different variants, each of
which has a distinct audit event. This commit tests the remaining variants
that weren't tested in r336564.
Submitted by: aniketp
MFC after: 2 weeks
X-MFC-With: 336564
Sponsored by: Google, Inc. (GSoC 2018)
Differential Revision: https://reviews.freebsd.org/D16381
This fixes usage/report size calculation of Microsoft`s "Touch Hardware
Quality Assurance" certificate blob found in many touchscreens.
While here, join several "c->flags = dval" lines in to single line.
Reviewed by: hselasky
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D16357
Use CLSET_TIMEOUT to set the timeout for connections to DSs instead of
specifying a timeout on each RPC. This is done so that SO_SNDTIMEO
is set on the TCP socket as well as specifying a time limit when
waiting for an RPC reply. Useful if the send queue for the TCP
connection has become constipated, due to a failed DS.
The choice of lease_duration / 4 is fairly arbitrary, but seems to work
ok, with a lower bound of 10sec.
For client connections to a DS, set the retry limit to vfs.nfsd.dsretries,
which is 2 by default.
This patch should only affect pNFS connections to DSs.
This patch requires r336542.
MFC after: 2 weeks
