the mask of a cpuset. Also, change the cpuset's mask before updating the
masks of all children. Previously changing a cpuset's mask first required
setting the mask to a super-set of both the old and new masks and then
changing it a second time to the new mask.
- Split the bqlock into bqclean and bqdirty locks.
- Only acquire the wakeup synchronization locks when we cross a
threshold requiring them.
- Restructure the way flushbufqueues() targets work so they are more
smp friendly and sane.
Reviewed by: kib
Discussed with: mckusick, attilio
Sponsored by: EMC / Isilon Storage Division
M vfs_bio.c
of a lock within a single thread.
- Fix handling of interlocks in WITNESS by properly requiring the interlock
to be held exactly once if it is specified.
the vnode lock while iterating over the free vnode list. Instead of
yielding, pause for 1 tick. The change is reported to help in some
virtualized environments.
Submitted by: Roger Pau Monn? <roger.pau@citrix.com>
Discussed with: jilles
Tested by: pho
MFC after: 2 weeks
space, fork(2) would cause shadowing of the physical object and
copying of the shared page into private copy, effectively preventing
updates for the exported timehands structure and stopping the clock.
Specify the maximum allowed permissions for the page to be read and
execute, preventing write from the user mode.
Reported and tested by: <huanghwh@yahoo.com>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
used as the estimation of size, to 32GB. This provides around 100K of
buffer headers and corresponding KVA for buffer map at the peak.
Sizing the cache larger is not useful, also resulting in the wasting
and exhausting of KVA for large machines.
Reported and tested by: bdrewery
Sponsored by: The FreeBSD Foundation
requires a pkthdr being present but that's not the case for either
_bus_dmamap_load_mbuf_sg() or bus_dmamap_load_mbuf_sg(9).
Reported by: sbruno
MFC after: 1 week
- Use a shared bufobj lock in getblk() and inmem().
- Convert softdep's lk to rwlock to match the bufobj lock.
- Move INFREECNT to b_flags and protect it with the buf lock.
- Remove unnecessary locking around bremfree() and BKGRDINPROG.
Sponsored by: EMC / Isilon Storage Division
Discussed with: mckusick, kib, mdf
be a GOOD IDEA (TM).
Apparently MOST users set this (e.g. tcp and friends) but there are a few
users that just assume that it is a sensible value but then go on to read it.
These include SCTP, pf and the FLOWTABLE option (and maybe others).
avoid a dangling pointer and eventual panic on system shutdown.
Reported by: Ali <comnetboy at gmail.com>
Tested by: Ali <comnetboy at gmail.com>
MFC after: 1 week
from 1k to 20k The previous value was good 10 years ago, but not
anymore now.
More importantly, lots of good surprises:
polling is incredibly effective under virtualization, and not only
prevents livelock but also saves most of the VM exit overhead in
receive mode.
Using polling, a FreeBSD instance under qemu-kvm remains perfectly
responsive even when bombed with 10 Mpps over an emulated e1000,
and happily processes 1.7 Mpps through ipfw.
Note that some incompatibilities still remain: e.g. polling is not
(yet) compatible with netmap, and seems to freeze the guest when
kern.polling.idle_poll=1
MFC after: 3 days
the right type for the argument in syscalls.master. Also fix the
posix_fallocate(2) and posix_fadvise(2) compat32 syscalls on the
architectures which require padding of the 64bit argument.
Noted and reviewed by: jhb
Pointy hat to: kib
MFC after: 1 week
apply to most jails but do apply to vnet jails. This includes adding
a new sysctl "security.jail.vnet" to identify vnet jails.
PR: conf/149050
Submitted by: mdodd
MFC after: 3 days
with any structure containing a uint64_t index. The tree code
auto-generates type safe wrappers.
- Eliminate the buf splay and replace it with pctrie. This is not only
significantly faster with large files but also allows for the possibility
of shared locking.
Reviewed by: alc, attilio
Sponsored by: EMC / Isilon Storage Division
null_hashget() obtains the reference on the nullfs vnode, which must
be dropped.
- Fix a wart which existed from the introduction of the nullfs
caching, do not unlock lower vnode in the nullfs_reclaim_lowervp().
It should be innocent, but now it is also formally safe. Inform the
nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on
nullfs inode.
- Add a callback to the upper filesystems for the lower vnode
unlinking. When inactivating a nullfs vnode, check if the lower
vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC
on the lower vnode, and reclaim upper vnode if so. This allows
nullfs to purge cached vnodes for the unlinked lower vnode, avoiding
excessive caching.
Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com>
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
locks. To support this, VNODE locks are created with the LK_IS_VNODE
flag. This flag is propagated down using the LO_IS_VNODE flag.
Note that WITNESS still records the LOR. Only the printing and the
optional entering into the kernel debugger is bypassed with the
WITNESS_NO_VNODE option.
all requested data was sent. The reason is that xfsize <= 0 condition
must not be tested at all if space == loopbytes. Otherwise, the done
is set to 1, and sendfile(2) is aborted too early.
Instead of moving the condition to exiting the inner loop after the
xfersize check, directly check for the completed transfer before the
testing of the available space in the socket buffer, and revert item 1
of r248830. It is arguably another bug to sleep waiting for socket
buffer space (or return EAGAIN for non-blocking socket) if all bytes
are already transferred.
Reported by: pho
Discussed with: scottl, gibbs
Tested by: scottl (stable/9 backport), pho
defaults to 1, meaning that it's off.
When read-ahead is enabled on a file, the vfs cluster code deliberately
breaks a read into 2 I/O transactions; one to satisfy the actual read,
and one to perform read-ahead. This makes sense in low-latency
circumstances, but often produces unbalanced i/o transactions that
penalize disks. By setting vfs.read_min, we can tell the algorithm to
fetch a larger transaction that what we asked for, achieving the same
effect as the read-ahead but without the doubled, unbalanced transaction
and the slightly lower latency. This significantly helps our workloads
with video streaming.
Submitted by: emax
Reviewed by: kib
Obtained from: Netflix
kernel-based POSIX semaphore descriptors to userland via procstat(1) and
fstat(1):
- Change sem file descriptors to track the pathname they are associated
with and add a ksem_info() method to copy the path out to a
caller-supplied buffer.
- Use the fo_stat() method of shared memory objects and ksem_info() to
export the path, mode, and value of a semaphore via struct kinfo_file.
- Add a struct semstat to the libprocstat(3) interface along with a
procstat_get_sem_info() to export the mode and value of a semaphore.
- Teach fstat about semaphores and to display their path, mode, and value.
MFC after: 2 weeks
it was being passed down to VOP_IOCTL() where it promptly resulted in
ENOTTY due to a missing else for the past 8 years. While here, use a
shared vnode lock while fetching the current file's size.
MFC after: 1 week
The pipe2() function is similar to pipe() but allows setting FD_CLOEXEC and
O_NONBLOCK (on both sides) as part of the function.
If p points to two writable ints, pipe2(p, 0) is equivalent to pipe(p).
If the pointer is not valid, behaviour differs: pipe2() writes into the
array from the kernel like socketpair() does, while pipe() writes into the
array from an architecture-specific assembler wrapper.
Reviewed by: kan, kib
The accept4() function, compared to accept(), allows setting the new file
descriptor atomically close-on-exec and explicitly controlling the
non-blocking status on the new socket. (Note that the latter point means
that accept() is not equivalent to any form of accept4().)
The linuxulator's accept4 implementation leaves a race window where the new
file descriptor is not close-on-exec because it calls sys_accept(). This
implementation leaves no such race window (by using falloc() flags). The
linuxulator could be fixed and simplified by using the new code.
Like accept(), accept4() is async-signal-safe, a cancellation point and
permitted in capability mode.
A blocking accept (and some other operations) waits on &so->so_timeo. Once
it wakes up, it will detect the SBS_CANTRCVMORE bit.
The error from accept() is [ECONNABORTED] which is not the nicest one -- the
thread calling accept() needs to know out-of-band what is happening.
A spurious wakeup on so->so_timeo appears harmless (sleep retried) except
when lingering on close (SO_LINGER, and in that case there is no descriptor
to call shutdown() on) so this should be fairly safe.
A shutdown() already woke up a blocked accept() for TCP sockets, but not for
Unix domain sockets. This fix is generic for all domains.
This patch was sent to -hackers@ and -net@ on April 5.
MFC after: 2 weeks
the file size, use VOP_GETATTR() instead of accessing vnode vm_object
un_pager.vnp.vnp_size.
Take the shared vnode lock earlier to cover the added VOP_GETATTR()
call and, as consequence, the whole internal sendfile loop. Reduce vm
object lock scope to not protect the local calculations.
Note that this is the last misuse of the vnp_size in the tree, the
others were removed from the ELF image activator by r230246.
Reviewed by: alc
Tested by: pho, bf (previous version)
MFC after: 1 week
instead of kernel_map size to prevent kernel memory exhaustion
by mbufs and a subsequent panic on physical page allocation
failure.
On architectures without a direct map all mbuf memory (except
for jumbo mbufs larger than PAGE_SIZE) comes from kmem_map.
It is the limiting factor hence.
For architectures with a direct map using the size of kmem_map
is a good proxy of available kernel memory as well. If it is
much smaller the mbuf limit may be sub-optimal but remains
reasonable, while avoiding panics under exhaustion.
The overall mbuf memory limit calculation may be reconsidered
again later, however due to the many different mbuf sizes and
different backing KVM maps it is a tricky subject.
Found by: pho's new network stress test
Pointed out by: alc (kmem_map instead of kernel_map)
Tested by: pho
Programs often do not expect an [EINTR] return from sem_wait() and POSIX
only allows it if the signal was installed without SA_RESTART. The timeout
in sem_timedwait() is absolute so it can be restarted normally.
The umtx call can be invoked with a relative timeout and in that case
[ERESTART] must be changed to [EINTR]. However, libc does not do this.
The old POSIX semaphore implementation did this correctly (before r249566),
unlike the new umtx one.
It may be desirable to avoid [EINTR] completely, which matches the pthread
functions and is explicitly permitted by POSIX. However, the kernel must
return [EINTR] at least for signals with SA_RESTART clear, otherwise pthread
cancellation will not abort a semaphore wait. In this commit, only restore
the 8.x behaviour which is also permitted by POSIX.
Discussed with: jhb
MFC after: 1 week
prevents us from creating UMA_ZONE_PCPU zones earlier.
As bandaid shift initialization of counter(9) zone later.
Reviewed by: kib
Reported & tested by: Lytochkin Boris <lytboris gmail.com>
signal.
- Fix the old ksem implementation for POSIX semaphores to not restart
sem_wait() or sem_timedwait() if interrupted by a signal.
MFC after: 1 week
The notes format is a header of sizeof(int), which stores the size of
the corresponding data structure to provide some versioning, and data
in the format as it is returned by a related sysctl call.
The userland tools (procstat(1)) will be taught to extract this data,
providing additional info for postmortem analysis.
PR: kern/173723
Suggested by: jhb
Discussed with: jhb, kib
Reviewed by: jhb (initial version), kib
MFC after: 1 month
LK_EXCLOTHER. LK_EXCLOTHER is only used to acquire a
usecount on a vnode during NFSv4 recovery from an
expired lease.
Reported and tested by: pho
MFC after: 2 weeks
is starting. This is in line with practice in OpenSolaris.
Note that this change is only in ULE and not in the 4BSD scheduler.
Once this change settles in (MFC timeout has expired) we'll try it out
on 4BSD as well.
PR: 177706
Submitted by: Tiwei Bie
MFC after: 1 month
and kern_proc_vmmap_out() functions to output process kinfo structures
to sbuf, to make the code reusable.
The functions are going to be used in the coredump routine to store
procstat info in the core program header notes.
Reviewed by: kib
MFC after: 3 weeks
function is provided, which is used either to calculate the note size
or output it to sbuf. On the first pass the notes are registered in a
list and the resulting size is found, on the second pass the list is
traversed outputing notes to sbuf. For the sbuf a drain routine is
provided that writes data to a core file.
The main goal of the change is to make coredump to write notes
directly to the core file, without preliminary preparing them all in a
memory buffer. Storing notes in memory is not a problem for the
current, rather small, set of notes we write to the core, but it may
becomes an issue when we start to store procstat notes.
Reviewed by: jhb (initial version), kib
Discussed with: jhb, kib
MFC after: 3 weeks
In some cases, kern_envp is set by the architecture code and env_pos does
not contain the length of the static kernel environment. In these cases
r249408 causes the kernel to discard the environment.
Fix this by updating the check for empty static env to *kern_envp != '\0'
Reported by: np@
In case where there are no static kernel environment entries, the
function init_dynamic_kenv() adds an incorrect entry at position 0 of
the dynamic kernel environment. This in turn causes kenv(1) to print
and empty list even though there are dynamic entries added later.
Fix this by checking env_pos in init_dynamic_kenv() and adding dynamic
entries only if there are static entries.
reside on their own cache line to prevent false sharing with other
nearby structures, especially for those in the .bss segment.
NB: Those mutexes and rwlocks with variables next to them that get
changed on every invocation do not benefit from their own cache line.
Actually it may be net negative because two cache misses would be
incurred in those cases.
Introduce counter(9) API, that implements fast and raceless counters,
provided (but not limited to) for gathering of statistical data.
See http://lists.freebsd.org/pipermail/freebsd-arch/2013-April/014204.html
for more details.
In collaboration with: kib
Reviewed by: luigi
Tested by: ae, ray
Sponsored by: Nginx, Inc.
Although native word padding (i.e. 8-byte on 64bit arch) looks to be
in agreement with standards, other parts of our code and other OSes
use 4-byte alignment.
This is not expected to change alignment for currently generated core
dump notes, as the notes look to consist of structures with sizes
multiple of 8 on 64-bit archs. But there are plans to add additional
notes, where 4-byte vs 8-byte alignment makes difference.
Discussed with: kib
Reviewed by: kib
MFC after: 2 weeks
POSIX mqueue, compatibility ksem and POSIX shm create a file descriptor that
has close-on-exec set. However, they do this incorrectly, leaving a window
where a thread may fork and exec while the flag has not been set yet. The
race is easily reproduced on a multicore system with one thread doing
shm_open and close and another thread doing posix_spawnp and waitpid.
Set UF_EXCLOSE via falloc()'s flags argument instead. This also simplifies
the code.
MFC after: 1 week
- Don't insert BKGRDMARKER bufs into the splay or dirty/clean buf lists.
No consumers need to find them there and it complicates the tree.
These flags are all FFS specific and could be moved out of the buf
cache.
- Use pbgetvp() and pbrelvp() to associate the background and journal
bufs with the vp. Not only is this much cheaper it makes more sense
for these transient bufs.
- Fix the assertions in pbget* and pbrel*. It's not safe to check list
pointers which were never initialized. Use the BX flags instead. We
also check B_PAGING in reassignbuf() so this should cover all cases.
Discussed with: kib, mckusick, attilio
Sponsored by: EMC / Isilon Storage Division
the handler address. Add a mark to distinguish between filter and
handler.
Note that the arguments for both filter and handler are same.
Sponsored by: The FreeBSD Foundation
Reviewed by: jhb
MFC after: 1 week
Allow boothowto and bootverbose to be set via kernel options, which
is useful on architectures that are unable to rely on a boot loader
to pass configuration variables to the kernel.
Submitted by: rwatson
extattr_set_{fd,file,link} is logically a write(2)-like operation and
should return ssize_t, just like extattr_get_*. Also, the user-space
utility was using an int for the return value of extattr_get_* and
extattr_list_*, both of which return an ssize_t.
MFC after: 1 week
vnode could be reclaimed while lock upgrade was performed.
Sponsored by: The FreeBSD Foundation
Reported and tested by: pho
Diagnosed and reviewed by: rmacklem
MFC after: 1 week
clear its pointer to next record, since next record
belongs to the buffer, and shouldn't be leaked.
The ng_ksocket(4) used to clear this pointer itself,
but the correct place is here.
Sponsored by: Nginx, Inc
1. If we wanted to send exactly as many bytes as the socket buffer is
sized for, the inner loop of kern_sendfile() would see that the
socket is full before seeing that it had no more bytes left to send.
This would cause it to return EAGAIN to the caller instead of
success. Fix by changing the order that these conditions are tested.
2. Simplify the calculation for the bytes to send in each iteration of
the inner loop of kern_sendfile()
3. Fix some calls with bogus arguments to sf_buf_ext(). These would
only trigger on mbuf allocation failure, but would be hilariously
bad if they did trigger.
Submitted by: gibbs(3), andre(2)
Reviewed by: emax, andre
Obtained from: Netflix
MFC after: 1 week
the thread reference on the vp->v_rdev and use the returned struct
cdev *dev instead of using vp->v_rdev. Call dev_strategy_csw()
instead of dev_strategy(), since we now own the reference.
Since the csw was already calculated, test d_flags to avoid mapping
the buffer if the driver supports unmapped requests [*].
Suggested by: kan [*]
Reviewed by: kan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
but assumes that a thread reference was already obtained on the passed
device. Use the function from physio(), to avoid two extra dev_mtx
lock and unlock. Note that physio() is always used as the cdevsw
method, or is called from a cdevsw method, and the caller already owns
the reference.
dev_strategy() is left to keep KPI intact, but now it is implemented
as a wrapper around dev_strategy_csw().
Do some style cleanup in physio().
Requested and reviewed by: kan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
maxbcache size fixed, the auto-tuned transient map is too small for
real-world load on i386.
Tested by: David Wolfskill
Sponsored by: The FreeBSD Foundation
In physio, check if device can handle unmapped IO and pass an
appropriately mapped buffer to the driver strategy routine. The
only driver in the tree that can handle unmapped buffers is one
exposed by GEOM, so mark it as such with the new flag in the
driver cdevsw structure.
This fixes insta-panics on hosts, running dconschat, as /dev/fwmem
is an example of the driver that makes use of physio routine, but
bypasses the g_down thread, where the buffer gets mapped normally.
Discussed with: kib (earlier version)
for migrating callouts to new CPU. This value is passed to
callout_cc_add() in order to update properly precision field in case of
rescheduling/migration.
Reviewed by: mav
The scope of these callbacks is primarily to support actions that affect the
taskqueue's thread environments. They are entirely optional, and
consequently are introduced as a new API: taskqueue_set_callback().
This interface allows the caller to specify that a taskqueue requires a
callback and optional context pointer for a given callback type.
The callback types included in this commit can be used to register a
constructor and destructor for thread-local storage using osd(9). This
allows a particular taskqueue to define that its threads require a specific
type of TLS, without the need for a specially-orchestrated task-based
mechanism for startup and shutdown in order to accomplish it.
Two callback types are supported at this point:
- TASKQUEUE_CALLBACK_TYPE_INIT, called by every thread when it starts, prior
to processing any tasks.
- TASKQUEUE_CALLBACK_TYPE_SHUTDOWN, called by every thread when it exits,
after it has processed its last task but before the taskqueue is
reclaimed.
While I'm here:
- Add two new macros, TQ_ASSERT_LOCKED and TQ_ASSERT_UNLOCKED, and use them
in appropriate locations.
- Fix taskqueue.9 to mention taskqueue_start_threads(), which is a required
interface for all consumers of taskqueue(9).
Reviewed by: kib (all), eadler (taskqueue.9), brd (taskqueue.9)
Approved by: ken (mentor)
Sponsored by: Spectra Logic
MFC after: 1 month
not every time an intermediate root (including the first devfs) is
mounted.
This is also consistent with waking up via root_mount_complete.
Reviewed by: jhb
MFC after: 13 days
u_long. Before this change it was of type int for syscalls, but prototypes
in sys/stat.h and documentation for chflags(2) and fchflags(2) (but not
for lchflags(2)) stated that it was u_long. Now some related functions
use u_long type for flags (strtofflags(3), fflagstostr(3)).
- Make path argument of type 'const char *' for consistency.
Discussed on: arch
Sponsored by: The FreeBSD Foundation
UMTX_PROFILING should really analyze the distribution of locks as they
index entries in the umtxq_chains hash-table.
However, the current implementation does add/dec the length counters
for *every* thread insert/removal, measuring at all really userland
contention and not the hash distribution.
Fix this by correctly add/dec the length counters in the points where
it is really needed.
Please note that this bug brought us questioning in the past the quality
of the umtx hash table distribution.
To date with all the benchmarks I could try I was not able to reproduce
any issue about the hash distribution on umtx.
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff, davide
MFC after: 2 weeks
SIGSTOP if stop signals are currently deferred. This can occur if a
process is stopped via SIGSTOP while a thread is running or runnable
but before it has set TDF_SBDRY.
Tested by: pho
Reviewed by: kib
MFC after: 1 week
bufobj counter of the writes in progress is incremented. Other thread
inspecting the bufobj would consider it clean.
For the regular vnodes, the vnode lock is typically held both by the
thread performing the bufwrite() and an other thread doing syncing,
which prevents the situation. On the other hand, writes to the VCHR
vnodes are done without holding vnode lock.
Increment the write ref counter for the buffer object before calling
bundirty().
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks
becoming too low, the softdep flush thread processes the workitems,
which frees the space in journal, and then unsuspends the fs. The
softdep_flush() and other workitem processing functions busy the
filesystem before iterating over the worklist, to prevent the parallel
unmount from freeing the mount data. The vfs_busy() is called with
MBF_NOWAIT flag.
Now, if the unmount is already started and the filesystem is suspended
due to low journal space, the journal is never flushed and filesystem
is never unsuspended, because vfs_busy(MBF_NOWAIT) call cannot succeed
for the unmounting fs, and softdep_flush() does not process the
workitems. Unmount needs to write metadata, where it hangs in the
"suspfs" state.
Move the vn_start_write() call in the dounmount() before setting the
MNTK_UNMOUNT flag. This practically ensures that softdep_flush()
processed the pending journal writes by making dounmount() wait for
the lift of the suspension.
Sponsored by: The FreeBSD Foundation
Reported and tested by: pho
MFC after: 2 weeks
we need to call ufs_checkpath() to walk from our new location to
the root of the filesystem to ensure that we do not encounter
ourselves along the way. Until now, we accomplished this by reading
the ".." entries of each directory in our path until we reached
the root (or encountered an error). This change tries to avoid the
I/O of reading the ".." entries by first looking them up in the
name cache and only doing the I/O when the name cache lookup fails.
Reviewed by: kib
Tested by: Peter Holm
MFC after: 4 weeks
This change allows creating file descriptors with close-on-exec set in some
situations. SOCK_CLOEXEC and SOCK_NONBLOCK can be OR'ed in socket() and
socketpair()'s type parameter, and MSG_CMSG_CLOEXEC to recvmsg() makes file
descriptors (SCM_RIGHTS) atomically close-on-exec.
The numerical values for SOCK_CLOEXEC and SOCK_NONBLOCK are as in NetBSD.
MSG_CMSG_CLOEXEC is the first free bit for MSG_*.
The SOCK_* flags are not passed to MAC because this may cause incorrect
failures and can be done later via fcntl() anyway. On the other hand, audit
is expected to cope with the new flags.
For MSG_CMSG_CLOEXEC, unp_externalize() is extended to take a flags
argument.
Reviewed by: kib
buffer, transparently handling mapped or unmapped buffers. Its intent
is to replace the use of bzero(bp->b_data) in cases where the buffer
might be unmapped, to avoid unneeded upgrades.
Sponsored by: The FreeBSD Foundation
Tested by: pho
do not map the b_pages pages into buffer_map KVA. The use of the
unmapped buffers eliminate the need to perform TLB shootdown for
mapping on the buffer creation and reuse, greatly reducing the amount
of IPIs for shootdown on big-SMP machines and eliminating up to 25-30%
of the system time on i/o intensive workloads.
The unmapped buffer should be explicitely requested by the GB_UNMAPPED
flag by the consumer. For unmapped buffer, no KVA reservation is
performed at all. The consumer might request unmapped buffer which
does have a KVA reserve, to manually map it without recursing into
buffer cache and blocking, with the GB_KVAALLOC flag.
When the mapped buffer is requested and unmapped buffer already
exists, the cache performs an upgrade, possibly reusing the KVA
reservation.
Unmapped buffer is translated into unmapped bio in g_vfs_strategy().
Unmapped bio carry a pointer to the vm_page_t array, offset and length
instead of the data pointer. The provider which processes the bio
should explicitely specify a readiness to accept unmapped bio,
otherwise g_down geom thread performs the transient upgrade of the bio
request by mapping the pages into the new bio_transient_map KVA
submap.
The bio_transient_map submap claims up to 10% of the buffer map, and
the total buffer_map + bio_transient_map KVA usage stays the
same. Still, it could be manually tuned by kern.bio_transient_maxcnt
tunable, in the units of the transient mappings. Eventually, the
bio_transient_map could be removed after all geom classes and drivers
can accept unmapped i/o requests.
Unmapped support can be turned off by the vfs.unmapped_buf_allowed
tunable, disabling which makes the buffer (or cluster) creation
requests to ignore GB_UNMAPPED and GB_KVAALLOC flags. Unmapped
buffers are only enabled by default on the architectures where
pmap_copy_page() was implemented and tested.
In the rework, filesystem metadata is not the subject to maxbufspace
limit anymore. Since the metadata buffers are always mapped, the
buffers still have to fit into the buffer map, which provides a
reasonable (but practically unreachable) upper bound on it. The
non-metadata buffer allocations, both mapped and unmapped, is
accounted against maxbufspace, as before. Effectively, this means that
the maxbufspace is forced on mapped and unmapped buffers separately.
The pre-patch bufspace limiting code did not worked, because
buffer_map fragmentation does not allow the limit to be reached.
By Jeff Roberson request, the getnewbuf() function was split into
smaller single-purpose functions.
Sponsored by: The FreeBSD Foundation
Discussed with: jeff (previous version)
Tested by: pho, scottl (previous version), jhb, bf
MFC after: 2 weeks
calls to toggle TDF_SBDRY rather than passing PBDRY to individual sleep
calls.
- Remove the stop_allowed parameters from cursig() and issignal().
issignal() checks TDF_SBDRY directly.
- Remove the PBDRY and SLEEPQ_STOP_ON_BDRY flags.
In other words we don't require CAP_SEEK if either O_APPEND or O_TRUNC flag is
given, because O_APPEND doesn't allow to overwrite existing data and O_TRUNC
requires CAP_FTRUNCATE already.
Sponsored by: The FreeBSD Foundation
will not smash the M_EXT and data pointer, so it is safe to
pass an mbuf with external storage procuded by m_getcl() to
m_move_pkthdr().
Reviewed by: andre
Sponsored by: Nginx, Inc.
the filesystem VOP_READ() and VOP_WRITE() implementations in the same
way as vn_io_fault_uiomove() over the unmapped buffers. Helper
provides the convenient wrapper over the pmap_copy_pages() for struct
uio consumers, taking care of the TDP_UIOHELD situations.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks
PBDRY (which simply doesn't make any sense) nor PCATCH (which could
be used by a malicious process to work around the PCPU limit).
Submitted by: Rudo Tomori
Reviewed by: kib
cluster_write() and cluster_wbuild() functions. The flags to be
allowed are a subset of the GB_* flags for getblk().
Sponsored by: The FreeBSD Foundation
Tested by: pho
buffers directly, use pmap_zero_page_area(9) for each zeroing page
region instead.
Sponsored by: The FreeBSD Foundation
Tested by: pho
MFC after: 2 weeks
the first page:
1. Cast uint16_t operands in a multiplication to unsigned int because
otherwise the implicit promotion to int results in a signed
multiplication that can overflow and the behaviour on integer
overflow is undefined.
2. Replace (offset + size > PAGE_SIZE) with (size > PAGE_SIZE - offset)
because the sum may overflow.
- Use the same tests to see if the path to the interpreter is on the first
page. There's no overflow here because size is already limited by
MAXPATHLEN, but the compiler optimises the new tests better. Also fix an
off-by-one error.
- Simplify tests to see if an ELF note program header is on the first page.
This also fixes an off-by-one error.
Reviewed by: kib
MFC after: 1 week
and that can drive someone crazy. While m_get2() is young and not
documented yet, change its order of arguments to match m_getm2().
Sorry for churn, but better now than later.
appropriate wait argument and checking return value. Before this change
m_extadd() could fail, and kern_sendfile() ignored that.
Sponsored by: Nginx, Inc.
- Make it return int, not void.
- Add wait parameter.
- Update MEXTADD() macro appropriately, defaults to M_NOWAIT, as
before this change.
Sponsored by: Nginx, Inc.
Change size requested to malloc(9) now that callwheel buckets are
callout_list and not callout_tailq anymore. This change was already
there but it seems it got lost after code churn in r248032.
Reported by: alc, kib
- Use u_int values for length and max_length values
- Add a way to reset the max_length heuristic in order to have the
possibility to reuse the mechanism consecutively without rebooting
the machine
- Add a way to quick display top5 contented buckets in the system for
the max_length value.
This should give a quick overview on the quality of the hash table
distribution.
Sponsored by: EMC / Isilon storage division
Reviewed by: jeff, davide
response to an rtprio_thread() call, when the priority is different
than the old priority, and either the old or the new priority class is
not RTP_PRIO_NORMAL (timeshare).
The reasoning for the second half of the test is that if it's a change in
timeshare priority, then the scheduler is going to adjust that priority
in a way that completely wipes out the requested change anyway, so
what's the point? (If that's not true, then allowing a thread to change
its own timeshare priority would subvert the scheduler's adjustments and
let a cpu-bound thread monopolize the cpu; if allowed at all, that
should require priveleges.)
On the other hand, if either the old or new priority class is not
timeshare, then the scheduler doesn't make automatic adjustments, so we
should honor the request and make the priority change right away. The
reason the old class gets caught up in this is the very reason for this
change: when thread A changes the priority of its child thread B from
idle back to timeshare, thread B never actually gets moved to a
timeshare-range run queue unless there are some idle cycles available
to allow it to first get scheduled again as an idle thread.
Reviewed by: jhb@
using callout_reset_sbt() instead of callout_reset(). We can't remove
lower limit completely in this case because of significant processing
overhead, caused by unability to use direct callout execution due to using
process mutex in callout handler for sending SEGALRM signal. With support
of periodic events that would allow unprivileged user to abuse the system.
Reviewed by: davide
- Rewrite kevent() timeout implementation to allow sub-tick precision.
- Make the interval timings for EVFILT_TIMER more accurate. This also
removes an hack introduced in r238424.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Fix kern_select() and sys_poll() so that they can handle sub-tick
precision for timeouts (in the same fashion it was done for nanosleep()
in r247797).
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Specify that precision of 0.5s is enough for resource limitation.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Specify that syslog doesn't need exactly 5 wakeups per second.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
kern_nanosleep() is now converted to use tsleep_sbt(). With this change
nanosleep() and usleep() can handle sub-tick precision for timeouts.
Also, try to help coalesce of events passing as argument to tsleep_bt()
a precision value calculated as a percentage of the sleep time.
This percentage is default 5%, but it can tuned according to users
need via the sysctl interface.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Introduce sbt variants of msleep(), msleep_spin(), pause(), tsleep() in
the KPI, allowing to specify timeout in 'sbintime_t' rather than ticks.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Extend condvar(9) KPI introducing sbt variant of cv_timedwait. This
rely on the previously committed sleepq_set_timeout_sbt().
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Convert sleepqueue(9) bits to the new callout KPI. Take advantage of
the possibility to run callback directly from hw interrupt context.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, markj, Fabian Keil
Make loadavg calculation callout direct. There are several reasons for it:
- it is very simple and doesn't worth context switch to SWI;
- since SWI is no longer used here, we can remove twelve years old hack,
excluding this SWI from from the loadavg statistics;
- it fixes problem when eventtimer (HPET) shares interrupt with some other
device, and that interrupt thread counted as permanent loadavg of 1; now
loadavg accounted before that interrupt thread is scheduled.
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo, marius, ian, Fabian Keil, markj
precise time event generation. This greatly improves granularity of
callouts which are not anymore constrained to wait next tick to be
scheduled.
- Extend the callout KPI introducing a set of callout_reset_sbt* functions,
which take a sbintime_t as timeout argument. The new KPI also offers a
way for consumers to specify precision tolerance they allow, so that
callout can coalesce events and reduce number of interrupts as well as
potentially avoid scheduling a SWI thread.
- Introduce support for dispatching callouts directly from hardware
interrupt context, specifying an additional flag. This feature should be
used carefully, as long as interrupt context has some limitations
(e.g. no sleeping locks can be held).
- Enhance mechanisms to gather informations about callwheel, introducing
a new sysctl to obtain stats.
This change breaks the KBI. struct callout fields has been changed, in
particular 'int ticks' (4 bytes) has been replaced with 'sbintime_t'
(8 bytes) and another 'sbintime_t' field was added for precision.
Together with: mav
Reviewed by: attilio, bde, luigi, phk
Sponsored by: Google Summer of Code 2012, iXsystems inc.
Tested by: flo (amd64, sparc64), marius (sparc64), ian (arm),
markj (amd64), mav, Fabian Keil
pointers to the file structure receiving descriptors stopped to work when also
at least few kilobytes of data is being send. In the kernel the
soreceive_generic() function doesn't see control mbuf as the first mbuf and
unp_externalize() is never called, first 6(?) kilobytes of data is missing as
well on receiving end.
This breaks for example tmux.
I don't know yet why going from 8 bytes to sizeof(struct filedescent) per
descriptor (or even to 16 bytes per descriptor) breaks things, but to
work-around it for now use 8 bytes per file descriptor at the cost of memory
allocation.
Reported by: flo, Diane Bruce, Jan Beich <jbeich@tormail.org>
Simple testcase provided by: mjg
int bindat(int fd, int s, const struct sockaddr *addr, socklen_t addrlen);
int connectat(int fd, int s, const struct sockaddr *name, socklen_t namelen);
which allow to bind and connect respectively to a UNIX domain socket with a
path relative to the directory associated with the given file descriptor 'fd'.
- Add manual pages for the new syscalls.
- Make the new syscalls available for processes in capability mode sandbox.
- Add capability rights CAP_BINDAT and CAP_CONNECTAT that has to be present on
the directory descriptor for the syscalls to work.
- Update audit(4) to support those two new syscalls and to handle path
in sockaddr_un structure relative to the given directory descriptor.
- Update procstat(1) to recognize the new capability rights.
- Document the new capability rights in cap_rights_limit(2).
Sponsored by: The FreeBSD Foundation
Discussed with: rwatson, jilles, kib, des
on the target directory descriptor, but only if this is renameat(2) and real
target directory descriptor is given (not AT_FDCWD). Without this fix regular
rename(2) fails if the target file already exists.
Reported by: Michael Butler <imb@protected-networks.net>
Reported by: Larry Rosenman <ler@lerctr.org>
Sponsored by: The FreeBSD Foundation
- Capability is no longer separate descriptor type. Now every descriptor
has set of its own capability rights.
- The cap_new(2) system call is left, but it is no longer documented and
should not be used in new code.
- The new syscall cap_rights_limit(2) should be used instead of
cap_new(2), which limits capability rights of the given descriptor
without creating a new one.
- The cap_getrights(2) syscall is renamed to cap_rights_get(2).
- If CAP_IOCTL capability right is present we can further reduce allowed
ioctls list with the new cap_ioctls_limit(2) syscall. List of allowed
ioctls can be retrived with cap_ioctls_get(2) syscall.
- If CAP_FCNTL capability right is present we can further reduce fcntls
that can be used with the new cap_fcntls_limit(2) syscall and retrive
them with cap_fcntls_get(2).
- To support ioctl and fcntl white-listing the filedesc structure was
heavly modified.
- The audit subsystem, kdump and procstat tools were updated to
recognize new syscalls.
- Capability rights were revised and eventhough I tried hard to provide
backward API and ABI compatibility there are some incompatible changes
that are described in detail below:
CAP_CREATE old behaviour:
- Allow for openat(2)+O_CREAT.
- Allow for linkat(2).
- Allow for symlinkat(2).
CAP_CREATE new behaviour:
- Allow for openat(2)+O_CREAT.
Added CAP_LINKAT:
- Allow for linkat(2). ABI: Reuses CAP_RMDIR bit.
- Allow to be target for renameat(2).
Added CAP_SYMLINKAT:
- Allow for symlinkat(2).
Removed CAP_DELETE. Old behaviour:
- Allow for unlinkat(2) when removing non-directory object.
- Allow to be source for renameat(2).
Removed CAP_RMDIR. Old behaviour:
- Allow for unlinkat(2) when removing directory.
Added CAP_RENAMEAT:
- Required for source directory for the renameat(2) syscall.
Added CAP_UNLINKAT (effectively it replaces CAP_DELETE and CAP_RMDIR):
- Allow for unlinkat(2) on any object.
- Required if target of renameat(2) exists and will be removed by this
call.
Removed CAP_MAPEXEC.
CAP_MMAP old behaviour:
- Allow for mmap(2) with any combination of PROT_NONE, PROT_READ and
PROT_WRITE.
CAP_MMAP new behaviour:
- Allow for mmap(2)+PROT_NONE.
Added CAP_MMAP_R:
- Allow for mmap(PROT_READ).
Added CAP_MMAP_W:
- Allow for mmap(PROT_WRITE).
Added CAP_MMAP_X:
- Allow for mmap(PROT_EXEC).
Added CAP_MMAP_RW:
- Allow for mmap(PROT_READ | PROT_WRITE).
Added CAP_MMAP_RX:
- Allow for mmap(PROT_READ | PROT_EXEC).
Added CAP_MMAP_WX:
- Allow for mmap(PROT_WRITE | PROT_EXEC).
Added CAP_MMAP_RWX:
- Allow for mmap(PROT_READ | PROT_WRITE | PROT_EXEC).
Renamed CAP_MKDIR to CAP_MKDIRAT.
Renamed CAP_MKFIFO to CAP_MKFIFOAT.
Renamed CAP_MKNODE to CAP_MKNODEAT.
CAP_READ old behaviour:
- Allow pread(2).
- Disallow read(2), readv(2) (if there is no CAP_SEEK).
CAP_READ new behaviour:
- Allow read(2), readv(2).
- Disallow pread(2) (CAP_SEEK was also required).
CAP_WRITE old behaviour:
- Allow pwrite(2).
- Disallow write(2), writev(2) (if there is no CAP_SEEK).
CAP_WRITE new behaviour:
- Allow write(2), writev(2).
- Disallow pwrite(2) (CAP_SEEK was also required).
Added convinient defines:
#define CAP_PREAD (CAP_SEEK | CAP_READ)
#define CAP_PWRITE (CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_R (CAP_MMAP | CAP_SEEK | CAP_READ)
#define CAP_MMAP_W (CAP_MMAP | CAP_SEEK | CAP_WRITE)
#define CAP_MMAP_X (CAP_MMAP | CAP_SEEK | 0x0000000000000008ULL)
#define CAP_MMAP_RW (CAP_MMAP_R | CAP_MMAP_W)
#define CAP_MMAP_RX (CAP_MMAP_R | CAP_MMAP_X)
#define CAP_MMAP_WX (CAP_MMAP_W | CAP_MMAP_X)
#define CAP_MMAP_RWX (CAP_MMAP_R | CAP_MMAP_W | CAP_MMAP_X)
#define CAP_RECV CAP_READ
#define CAP_SEND CAP_WRITE
#define CAP_SOCK_CLIENT \
(CAP_CONNECT | CAP_GETPEERNAME | CAP_GETSOCKNAME | CAP_GETSOCKOPT | \
CAP_PEELOFF | CAP_RECV | CAP_SEND | CAP_SETSOCKOPT | CAP_SHUTDOWN)
#define CAP_SOCK_SERVER \
(CAP_ACCEPT | CAP_BIND | CAP_GETPEERNAME | CAP_GETSOCKNAME | \
CAP_GETSOCKOPT | CAP_LISTEN | CAP_PEELOFF | CAP_RECV | CAP_SEND | \
CAP_SETSOCKOPT | CAP_SHUTDOWN)
Added defines for backward API compatibility:
#define CAP_MAPEXEC CAP_MMAP_X
#define CAP_DELETE CAP_UNLINKAT
#define CAP_MKDIR CAP_MKDIRAT
#define CAP_RMDIR CAP_UNLINKAT
#define CAP_MKFIFO CAP_MKFIFOAT
#define CAP_MKNOD CAP_MKNODAT
#define CAP_SOCK_ALL (CAP_SOCK_CLIENT | CAP_SOCK_SERVER)
Sponsored by: The FreeBSD Foundation
Reviewed by: Christoph Mallon <christoph.mallon@gmx.de>
Many aspects discussed with: rwatson, benl, jonathan
ABI compatibility discussed with: kib
directory entry, matched by the inode number, is ".".
NFSv4 client might instantiate the distinct vnodes which have the same
inode number, since single v4 export can be combined from several
filesystems on the server. For instance, a case when the nested
server mount point is exactly one directory below the top of the
export, causes directory and its parent to have the same inode number
2. The vop_stdvptocnp() algorithm then returns "." as the name of the
lower directory.
Filtering out the "." entry with ENOENT works around this behaviour,
the error forces getcwd(3) to fall back to usermode implementation,
which compares both st_dev and st_ino.
Based on the submission by: rmacklem
Tested by: rmacklem
MFC after: 1 week
Switch eventtimers(9) from using struct bintime to sbintime_t.
Even before this not a single driver really supported full dynamic range of
struct bintime even in theory, not speaking about practical inexpediency.
This change legitimates the status quo and cleans up the code.
When CPU becomes idle, cpu_idleclock() calculates time to the next timer
event in order to reprogram hw timer. Return that time in sbintime_t to
the caller and pass it to acpi_cpu_idle(), where it can be used as one
more factor (quite precise) to extimate furter sleep time and choose
optimal sleep state. This is a preparatory change for further callout
improvements will be committed in the next days.
The commmit is not targeted for MFC.
intact if getblk() is done on the already owned buffer. Exit from
brelse() early when the lock recursion is detected, otherwise brelse()
might prematurely destroy the buffer under some circumstances.
Sponsored by: The FreeBSD Foundation
Noted by: mckusick
Tested by: pho
MFC after: 2 weeks
changes in r246417 were incomplete as they did not add explicit calls to
sigdeferstop() around all the places that previously passed SBDRY to
_sleep(). In addition, nfs_getcacheblk() could trigger a write RPC from
getblk() resulting in sigdeferstop() recursing. Rather than manually
deferring stop signals in specific places, change the VFS_*() and VOP_*()
methods to defer stop signals for filesystems which request this behavior
via a new VFCF_SBDRY flag. Note that this has to be a VFC flag rather than
a MNTK flag so that it works properly with VFS_MOUNT() when the mount is
not yet fully constructed. For now, only the NFS clients are set this new
flag in VFS_SET().
A few other related changes:
- Add an assertion to ensure that TDF_SBDRY doesn't leak to userland.
- When a lookup request uses VOP_READLINK() to follow a symlink, mark
the request as being on behalf of the thread performing the lookup
(cnp_thread) rather than using a NULL thread pointer. This causes
NFS to properly handle signals during this VOP on an interruptible
mount.
PR: kern/176179
Reported by: Russell Cattelan (sigdeferstop() recursion)
Reviewed by: kib
MFC after: 1 month
* VM_OBJECT_LOCK and VM_OBJECT_UNLOCK are mapped to write operations
* VM_OBJECT_SLEEP() is introduced as a general purpose primitve to
get a sleep operation using a VM_OBJECT_LOCK() as protection
* The approach must bear with vm_pager.h namespace pollution so many
files require including directly rwlock.h
write is a disk write request that tells the disk that the buffer
being written must be committed to the media along with any writes
that preceeded it before any future blocks may be written to the drive.
Barrier writes are provided by adding the functions bbarrierwrite
(bwrite with barrier) and babarrierwrite (bawrite with barrier).
Following a bbarrierwrite the client knows that the requested buffer
is on the media. It does not ensure that buffers written before that
buffer are on the media. It only ensure that buffers written before
that buffer will get to the media before any buffers written after
that buffer. A flush command must be sent to the disk to ensure that
all earlier written buffers are on the media.
Reviewed by: kib
Tested by: Peter Holm
blocking modes described in section 3.4.3 of RFC 2783, allowing the caller
to retrieve the most recent values without blocking, to block for a specified
time, or to block forever.
Reviewed by: discussion on hackers@
now disables read-ahead. It used to effectively restore the system default
readahead hueristic if it had been changed; a negative value now restores
the default.
Reviewed by: kib
every architecture's busdma_machdep.c. It is done by unifying the
bus_dmamap_load_buffer() routines so that they may be called from MI
code. The MD busdma is then given a chance to do any final processing
in the complete() callback.
The cam changes unify the bus_dmamap_load* handling in cam drivers.
The arm and mips implementations are updated to track virtual
addresses for sync(). Previously this was done in a type specific
way. Now it is done in a generic way by recording the list of
virtuals in the map.
Submitted by: jeff (sponsored by EMC/Isilon)
Reviewed by: kan (previous version), scottl,
mjacob (isp(4), no objections for target mode changes)
Discussed with: ian (arm changes)
Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris),
amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
Older entries should be 'before' newer entries in the new buffer too
and there should be no zero-filled gap between them.
Pointed out by: jhb
MFC after: 3 days
X-MFC with: r246282
until child performs exec(). The behaviour is reasonable when a
debugger is the real parent, because the parent is stopped until
exec(), and sending a debugging event to the debugger would deadlock
both parent and child.
On the other hand, when debugger is not the parent of the vforked
child, not sending debugging signals makes it impossible to debug
across vfork.
Fix the issue by declining generating debug signals only when vfork()
was done and child called ptrace(PT_TRACEME). Set a new process flag
P_PPTRACE from the attach code for PT_TRACEME, if P_PPWAIT flag is
set, which indicates that the process was created with vfork() and
still did not execed. Check P_PPTRACE from issignal(), instead of
refusing the trace outright for the P_PPWAIT case. The scope of
P_PPTRACE is exactly contained in the scope of P_PPWAIT.
Found and tested by: zont
Reviewed by: pluknet
MFC after: 2 weeks
Posix requires that open(2) is restartable for SA_RESTART.
For non-posix objects, in particular, devfs nodes, still disable
automatic restart of the opens. The open call to a driver could have
significant side effects for the hardware.
Noted and reviewed by: jilles
Discussed with: bde
MFC after: 2 weeks
cpuset mask for the associated interrupt thread.
The text used above is verbatim from r195249 and the code should now be
in line with the intent of that commit.
195702, 195703, and 195821 prevented a thread from suspending while holding
locks inside of NFS by forcing the thread to fail sleeps with EINTR or
ERESTART but defer the thread suspension to the user boundary. However,
this had the effect that stopping a process during an NFS request could
abort the request and trigger EINTR errors that were visible to userland
processes (previously the thread would have suspended and completed the
request once it was resumed).
This change instead effectively masks stop signals while in the NFS client.
It uses the existing TDF_SBDRY flag to effect this since SIGSTOP cannot
be masked directly. Also, instead of setting PBDRY on individual sleeps,
the NFS client now sets the TDF_SBDRY flag around each NFS request and
stop signals are masked for all sleeps during that region (the previous
change missed sleeps in lockmgr locks). The end result is that stop
signals sent to threads performing an NFS request are completely
ignored until after the NFS request has finished processing and the
thread prepares to return to userland. This restores the behavior of
stop signals being transparent to userland processes while still
preventing threads from suspending while holding NFS locks.
Reviewed by: kib
MFC after: 1 month
Only during very early boot, before malloc(9) is functional (SI_SUB_KMEM),
the static ktr_buf_init is used. Size of the static buffer is determined
by a new kernel option KTR_BOOT_ENTRIES. Its default value is 1024.
This commit builds on top of r243046.
Reviewed by: alc
MFC after: 17 days
And provide kernel compiler version as a sysctl as well.
This is useful while we have gcc and clang cohabitation.
This could be even more useful when we have support
for external toolchains.
In cooperation with: mjg
MFC after: 13 days
in kern_wait6(), which is called by kern_wait(). Remove the redundand
check, introduced in r243136, and add a comment noting this, to make
the code less confusing.
The blank lines are added to properly delineate the scope of the
preceeding comments.
Noted by: "Jukka A. Ukkonen" <jau@iki.fi>
MFC after: 1 week
tunable_mbinit() where it is next to where it is used later.
Change the sysinit level of tunable_mbinit() from SI_SUB_TUNABLES
to SI_SUB_KMEM after the VM is running. This allows to use better
methods to determine the effectively available physical and virtual
memory available to the kernel.
Update comments.
In a second step it can be merged into mbuf_init().
When maxusers was unrestricted and maxfiles was allowed to autotune
much higher the result was that ncallout which was based on maxfiles
and maxproc grew much higher than was needed.
To fix this clip autotuning to the same number we would get with
the old maxusers algorithm which would stop scaling at 384
maxusers.
Growing ncalout higher is not likely to be needed since most consumers
of timeout(9) are gone and any higher value for ncallout causes the
callwheel hashes to be much larger than will even be needed for
most applications.
MFC after: 1 month
Reviewed by: mav
