r341812 enabled only arm target support in LLVM on arm and armv6,
because ld.bfd 2.17.50 lacked support for range extensions required for
linking such large binaries/libraries. r341812 indicated that the
workaround should be removed once the userland can be linked by lld.
r354289 switched armv6 to use lld by default, so remove the workaround
on armv6. The workaround remains in place for arm (v5), and will
presumably be removed when arm is retired.
Sponsored by: The FreeBSD Foundation
This change makes it possible to use a POWER Hypervisor virtual
terminal device (phyp vty) as a GDB debug port.
Similar to the uart debug port, it has to be enabled by setting
the hw.uart_phyp.dbgport variable to the vty node of the device
tree.
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D22205
The header is abused for inclusion into userspace, and on stable
branches neither device_t nor bool types are not defined when used
from userspace.
Sponsored by: The FreeBSD Foundation
X-MFC after: now
Regression from r352174. In the vm_page_rename() failure case we forgot
to unlock the vm object locks before sleeping and reacquiring them.
Reviewed by: jeff
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22542
Several sysctl sysctls output to a user buffer while holding a
non-sleepable lock that protects the sysctl topology. They need to wire
the output buffer, or else they may try to sleep on a page fault.
Reviewed by: cem, markj
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D22528
'entry'. Where 'entry' is used to identify the starting point for
iteration, use 'first_entry'. These are the naming conventions used in
most of the vm_map.c code. Where VM_MAP_ENTRY_FOREACH can be used, do
so. Squeeze a few lines to fit in 80 columns. Where lines are being
modified for these reasons, look to remove style(9) violations.
Reviewed by: alc, markj
Differential Revision: https://reviews.freebsd.org/D22458
r297816 added some bpf magic for VIMAGE unconditionally which no longer
allows kernels to compile without bpf (but with other networking).
Add the missing ifdef checks and allow a kernel to compile without bpf
again.
PR: 242136
Reported by: dave mischler.com
MFC after: 2 weeks
loaded modules (pass 0/false for the can_lock arg). Searching the unwind
info in modules acquires an exclusive sxlock, and the stack(9) functions can
be called in a context where unbounded sleeps are forbidden (such as from
the witness checkorder code).
Just ignoring the existence of modules in stack_save() is not ideal, so I'm
looking for a better solution, but this commit will make it possible to boot
an ARM kernel with WITNESS enabled again, until I get something better.
PR: 242200
Linux epoll allow passing of any negative timeout value to epoll_wait()
to cause unbound blocking
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22517
Such an events are legal and should be interpreted as EPOLLERR | EPOLLHUP.
Register a disabled kqueue event in that case as we do not support EPOLLHUP yet.
Required by Linux Steam client.
PR: 240590
Reported by: Alex S <iwtcex@gmail.com>
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22516
Linux epoll EPOLL_CTL_ADD op handler should always check registration
of both EVFILT_READ and EVFILT_WRITE kevents to deceide if supplied
file descriptor fd is already registered with epoll instance.
Reviewed by: emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22515
Linux epoll does not remove descriptor after one-shot event has been triggered.
Set EV_DISPATCH kqueue flag rather then EV_ONESHOT to get the same behavior.
Required by Linux Steam client.
PR: 240590
Reported by: Alex S <iwtcex@gmail.com>
Reviewed by: emaste, imp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22513
Note that the change in vm_object_collapse() is arguably a correctness
fix. We must not collapse into content-identity carrying objects.
Reviewed by: jeff
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22467
Record as much bits from curthread into busy_lock as fits. Low bits
for struct thread * representation are zero due to struct and zone
alignment, and they leave space for busy flags (perhaps except
statically allocated thread0). Upper bits are not very interesting
for assert, and in most practical situations recorded value should
allow to manually identify the owner with certainity.
Assert that unbusy is performed by the owner, except few places where
unbusy is done in io completion handler. For this case, add
_unchecked variants of asserts and unbusy primitives.
Reviewed by: markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D22298
Top-level kern_renameat() increases the writecount on the mount point,
which, together with tmpfs unmount suspending the mount, already
ensures that unmount cannot proceed while rename unlocks and relocks
all operated vnodes.
Remove vfs_busy() call from tmpfs_rename() which was done while
holding a vnode lock, creating the deadlock. The only intent of the
busy operation seems to be the prevention of unmount, which is already
ensured.
Reported and tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Also, Giant isn't required to busy / unbusy a device, so drop that too while I'm
here. It's not done elsewhere in the tree and in the future will likely be
handled by a node lock to ensure consistency. Leave Giant in place for attach
and removing childing, as that's actually still needed, even if imperfect.
Remove stale comment about contigmalloc taking Giant and calling w/o the lock
held. Neither of these is still true.
Move the locking back into the ioctl handler. This "fixes" the race where we hve
a hot plug event just after the dropping of Giant in pci_find_dbsf, assuming the
driver doesn't then call anything that drops and picks up Giant again... It's a
little safer since don't think it doesn't, but we lack the tools to know for
sure.
When we get a device departed message from the firmware, we send a TARGET_REST
to the device to let the firmware know we're done and as part of the recovery
process. This will abort all the commands. While the documentation says the IOC
is responsible for writing the completion message for all the commands pending
with an aborted status, we sometimes have queued commands for the target that
haven't been completed so are in the INQUEUE state. So, when we later complete
the pending CCB as aborted, these commands are freed and we hit the "state not
busy" panic.
Elsewhere where we dequeue commands, we move the state to BUSY from INQUEUE. Do
that here as well. In talking to Ken, Scott and Justin, they recommended a
series of tests to see if this is 100% safe. Those tests are ongoing, but
preliminary tests suggest this is safe as we see no duplicate completions when
we hit this case at work. We have a machine that has a dodgy powersupply which
usually doesn't apply power to a few drives, but sometimes does when the machine
is under heavy load so we get a rash of the connect / disconnect messages over
half an hour. Without this change, we'd see state not busy panic. With this
change, the drives just annoyingly come and go without affecting the rest of the
machine, but without a complete error injection test suite, it's hard to know if
all edge cases are now covered or not.
Discussed with: scottl, ken, gibbs
We have -Werror=strict-overflow so gcc complains:
In file included from /tmp/obj/workspace/src/amd64.amd64/tmp/usr/include/bitstring.h:36:0,
from /workspace/src/tests/sys/sys/bitstring_test.c:34:
/workspace/src/tests/sys/sys/bitstring_test.c: In function 'bit_ffc_at_test':
/workspace/src/sys/sys/bitstring.h:239:5: error: assuming signed overflow does not occur when assuming that (X + c) >= X is always true [-Werror=strict-overflow]
if (_start >= _nbits) {
^
Disable assuming overflow of signed integer will never happen by specifying
-fno-strict-overflow
Sponsored by: The FreeBSD Foundation
Four bytes of padding are needed in the regular powerpc case to bring the
stack frame size up to a multiple of 16 bytes to meet ABI requirements.
Fixes odd hangs I was encountering during testing.
This allows the driver to be updated for the next firmware without
waiting for it to be released.
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Summary:
We need to save off the full 64-bit register, not just the low 32 bits,
of all registers getting saved off in _rtld_bind_start. Additionally,
we need to save off the other SPE registers (SPEFSCR and accumulator),
so that their program state is not affected by the PLT resolver.
Reviewed by: bdragon
Differential Revision: https://reviews.freebsd.org/D22520
Add a warning when a device registers with devfs and requests
D_NEEDGIANT. The warning says the device will go away before
13.0. This is needed to flush out the devices in the tree that are
still Giant locked. This warning, or some variant of it, should have
gone into the tree a long time ago...
The intention is to require all devices be converted to not use
automatic giant in this way, or remove any such devices that remain
that we don't have the hardware to test a conversion of.
kbd so far is the only device that can't leave the tree, yet needs
something sensible done to avoid the auto giant lock (even if it is
just doing the wrapping itself). There may be others added to this
list... Any discussions of this topic will take place on arch@.
to geom, and nothing we call requires it to be held. It's left over
from a time when the latter wasn't the case. Retire it.
Reviewed in concept: scottl@
The /dev/pci device doesn't need GIANT, per se. However, one routine
that it calls, pci_find_dbsf implicitly does. It walks a list that can
change when PCI scans a new bus. With hotplug, this means we could
have a race with that scanning. To prevent that, take out Giant around
scanning the list.
However, given that we have places in the tree that drop giant, if
held when we call into them, the whole use of Giant to protect newbus
may be less effective that we desire, so add a comment about why we're
talking it out, and we'll address the issue when we lock newbus with
something other than Giant.
Theoretically, this was breaking the size calculation for the symbol.
Noticed when doing a readthrough.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D22525
Switch from "evaddumiaaw 0,0" to "evmwumiaa 0,0,0" when persisting the
accumulator. This has the benefit of actually being implemented in QEMU
as it is the form Linux uses for the same task.
Both instructions are functionally equivilent, as we are using them for
their side effect of copying the accumulator to GPRs rather than for the
actual math operation that they are performing.
Reviewed by: jhibbits
Summary:
Enable on powerpc64 and in lib/libclang_rt/Makefile change
MACHINE_CPUARCH to MACHINE_ARCH because on powerpc64
MACHINE_ARCH==MACHINE_CPUARCH so the 32-bit library overwrites 64-bit
library during installworld.
This patch doesn't enable any other libclang_rt libraries because they
need to be separately ported.
I have verified that games/julius (which fails on powerpc64 elfv2
without this change because of no libclang_rt profiling library) builds.
Test Plan: Ship it, test on powerpc and powerpcspe
Submitted by: pkubaj
Reviewed by: dim, jhibbits
Differential Revision: https://reviews.freebsd.org/D22425
MFC after: 1 month
X-MFC-With: r353358
should identify accurately which function exhibited the bug.
Reviewed by: asomers
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D22519
This should have been done back when it was added, but it was not. It only
really adds an extra entry for memory mapping bits in bcm2835_vcbus.c, so
nothing too extensive yet.
Now that it works for the Raspberry Pi 4, we can discontinue our workarounds
that were put in place to at least get a bootable kernel for other testing.
According to the documentation I have, DREQ pacing should be required here.
The DREQ# hasn't changed since the BCM2835. As soon as we attempt to setup
DREQ, DMA stalls and there's no clear reason why as of yet. Setting this
back to NONE seems to work just as well, though it's yet to be determined if
this is a sustainable model in high-throughput scenarios.
Add explicit SI_SUB_EPOCH, after SI_SUB_TASKQ and before SI_SUB_SMP
(EARLY_AP_STARTUP). Rename existing "SI_SUB_TASKQ + 1" to SI_SUB_EPOCH.
epoch(9) consumers cannot epoch_alloc() before SI_SUB_EPOCH:SI_ORDER_SECOND,
but likely should allocate before SI_SUB_SMP. Prior to this change,
consumers (well, epoch itself, and net/if.c) just open-coded the
SI_SUB_TASKQ + 1 order to match epoch.c, but this was fragile.
Reviewed by: mmacy
Differential Revision: https://reviews.freebsd.org/D22503
I have some disks reporting "Logical unit is in process of becoming ready"
for about half an hour before finally reporting failure. During that time
CAM waits for the readiness during ~2 minutes for each request, that makes
system boot take very long time.
This change reduces wait times for the following requests to ~1 second if
previously long wait for that device has timed out.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The internal datastructures do not need to be visible outside of
random_harvestq, and this helps ensure they are not misused.
No functional change.
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22485
There's no need to dynamically populate them; the SYSCTL_ macros take care
of load/unload appropriately already (and random_harvestq is 'standard' and
cannot be unloaded anyway).
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22484
Break random_harvestq_prime up into some logical subroutines. The goal
is that it becomes easier to add other early entropy sources.
While here, drop pre-12.0 compatibility logic. loader default configuration
should preload the file as expeced since 12.0.
Approved by: csprng(delphij, markm)
Differential Revision: https://reviews.freebsd.org/D22482
