While here, use MAXARGS. This brings its 'struct syscall_args' in sync
with most other architectures.
Reviewed by: arichardson, brooks
MFC after: 2 weeks
Sponsored by: EPSRC
Differential Revision: https://reviews.freebsd.org/D26619
There may be additional 64-bit ABIs supported, so use a positive check rather
than a negative check.
Suggested by: imp
MFC after: 1 week
Sponsored by: Juniper Networks, Inc
Summary:
Two bugs:
* Elf32_Auxinfo is broken, using pointers in the union, which are 64-bits not
32.
* freebsd32_sysarch() doesn't update the 'user local' register when handling
MIPS_SET_TLS, leading to a NULL pointer dereference in the 32-bit
application.
Reviewed by: #mips, brooks
MFC after: 1 week
Sponsored by: Juniper Networks, Inc
Differential Revision: https://reviews.freebsd.org/D26556
On Ampere Altra systems, the sparse population of RAM within the
physical address space causes the vm_page_dump bitmap to be much
larger than necessary, increasing the size from ~8 Mib to > 2 Gib
(and overflowing `int` for the size).
Changing the page dump bitmap also changes the minidump file
format, so changes are also necessary in libkvm.
Reviewed by: jhb
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26131
These definitions were repeated by all architectures, with small
variations. Consolidate the common definitons in machine
independent code and use bitset(9) macros for manipulation. Many
opportunities for deduplication remain in the machine dependent
minidump logic. The only intended functional change is increasing
the bit index type to vm_pindex_t, allowing the indexing of pages
with address of 8 TiB and greater.
Reviewed by: kib, markj
Approved by: scottl (implicit)
MFC after: 1 week
Sponsored by: Ampere Computing, Inc.
Differential Revision: https://reviews.freebsd.org/D26129
One problem with the bus_space_read_N() and bus_space_write_N() family of
functions is that they provide no protection against exceptions which can
occur when no physical hardware or device responds to the read or write
cycles. In such a situation, the system typically would panic due to a
kernel-mode bus error. The bus_space_peek_N() and bus_space_poke_N() family
of functions provide a mechanism to handle these exceptions gracefully
without the risk of crashing the system.
Typical example is access to PCI(e) configuration space in bus enumeration
function on badly implemented PCI(e) root complexes (RK3399 or Neoverse
N1 N1SDP and/or access to PCI(e) register when device is in deep sleep state.
This commit adds a real implementation for arm64 only. The remaining
architectures have bus_space_peek()/bus_space_poke() emulated by using
bus_space_read()/bus_space_write() (without exception handling).
MFC after: 1 month
Reviewed by: kib
Differential Revision: https://reviews.freebsd.org/D25371
This allows privileged userspace processes to find information about the
physical page backing a given mapping. It is useful in applications
such as DPDK which perform some of their own memory management.
Reviewed by: kib, jhb (previous version)
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara Inc.
Differential Revision: https://reviews.freebsd.org/D26237
- Clear the current thread's TLS pointer on exec. Previously the TLS
pointer (and register) remain unchanged.
- Explicitly clear the TLS pointer when new threads are created.
- Make md_tls_tcb_offset per-process instead of per-thread.
The layout of the TLS and TCB are identical for all threads in a
process, it is only the TLS pointer values themselves that vary by
thread. This also makes setting md_tls_tcb_offset in
cpu_set_user_tls() redundant with the setting in exec_setregs(), so
only set it in exec_setregs().
Submitted by: Alfredo Mazzinghi (1)
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24957
Match other architectures and print CPU information during
cpu_startup(). In particular, this prints the information after the
message buffer is initialized which allows it to be retrieved after
boot via dmesg(8).
While here, add some extern declarations to <machine/md_var.h> in
place of duplicated declarations in various source files.
Reviewed by: brooks
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24936
Rather than walking all of cpu_switch looking for the sequence of
instructions to patch, add a global label at the location that needs
the patch applied.
Reviewed by: brooks, Alfredo Mazzinghi <alfredo.mazzinghi_cl.cam.ac.uk>
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24931
The use of "int" here caused the compiler to believe that it needs to
insert a "sll $n, $n, 0" to sign extend as part of the implicit cast
to uint64_t.
Submitted by: Nathaniel Filardo <nwf20@cl.cam.ac.uk>
Reviewed by: brooks, arichardson
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24457
This is a lock-based emulation of 64-bit atomics for kernel use, split off
from an earlier patch by jhibbits.
This is needed to unblock future improvements that reduce the need for
locking on 64-bit platforms by using atomic updates.
The implementation allows for future integration with userland atomic64,
but as that implies going through sysarch for every use, the current
status quo of userland doing its own locking may be for the best.
Submitted by: jhibbits (original patch), kevans (mips bits)
Reviewed by: jhibbits, jeff, kevans
Differential Revision: https://reviews.freebsd.org/D22976
This is a 32-bit structure embedded in each vm_page, consisting mostly
of page queue state. The use of a structure makes it easy to store a
snapshot of a page's queue state in a stack variable and use cmpset
loops to update that state without requiring the page lock.
This change merely adds the structure and updates references to atomic
state fields. No functional change intended.
Reviewed by: alc, jeff, kib
Sponsored by: Netflix, Intel
Differential Revision: https://reviews.freebsd.org/D22650
o Remove All Rights Reserved from my notices
o imp@FreeBSD.org everywhere
o regularize punctiation, eliminate date ranges
o Make sure that it's clear that I don't claim All Rights reserved by listing
All Rights Reserved on same line as other copyright holders (but not
me). Other such holders are also listed last where it's clear.
Most of this diff is refactoring to reduce duplication between the different
acq_ and rel_ variants.
Differential Revision: https://reviews.freebsd.org/D21822
For ll/sc architectures, atomic(9) allows failure modes where *old == val
due to write failure and callers should compensate for this. Do not retry on
failure, just leave 0 in ret and fail the operation if we couldn't sc it.
This lets the caller determine if it should retry or not.
Reviewed by: kib
Looks ok: imp
Differential Revision: https://reviews.freebsd.org/D21836
This is derived from similar work done in r310481 for i386 and r312610 for
armv6/armv7. Additionally, use a critical section to keep the thread
pinned for per-CPU operations instead of completely disabling local interrupts.
No objections from: adrian, jmallett, imp
Differential Revision: https://reviews.freebsd.org/D18593
The symbol version for _mcount was removed 12 years ago in r169525 from
gmon/Symbol.map, to be added to the per-arch Symbol.map. mips was overlooked
in this, so _mcount has no symver. Add it back to where it should have been,
rather than where it would go if it were added today, since we're correcting
a historical mistake.
Additionally, _mcount is getting thrown into .mdebug.abi32 in the llvm80/90
world as it's not getting explicitly thrown into .text, so do this now. This
fixes the libc build that was previously failing due to relocations in
.mdebug.abi32. This is specifically due to the way clang's integrated AS
works and that they emit the .mdebug.abiNN section early in the process. An
LLVM bug has been submitted[0] and an agreement has been made that the
mips backend should switch to .text following .mdebug.abiNN for
compatibility.
[0] https://bugs.llvm.org/show_bug.cgi?id=43119
Reviewed by: imp, arichardson
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21435
Many extern struct pcpu <something>__pcpu declarations were
copied/pasted in sources. The issue is that the definition is MD, but
it cannot be provided by machine/pcpu.h due to actual struct pcpu
defined in sys/pcpu.h later than the inclusion of machine/pcpu.h.
This forced the copying when other code needed direct access to
__pcpu. There is no way around it, due to machine/pcpu.h supplying
part of struct pcpu fields.
To work around the problem, add a new machine/pcpu_aux.h header, which
should fill any needed MD definitions after struct pcpu definition is
completed. This allows to remove copies of __pcpu spread around the
source. Also on x86 it makes it possible to remove work arounds like
OFFSETOF_CURTHREAD or clang specific warnings supressions.
Reported and tested by: lwhsu, bcran
Reviewed by: imp, markj (previous version)
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D21418
machine/regnum.h ends up being included by sys/procfs.h and sys/ptrace.h via
machine/reg.h. Many of the regnum definitions are too short and too generic
to be exposing to any userland application including one of these two
headers. Moreover, these actively cause build failures in googletest
(template <typename T1 ...> expanding to template <typename 9 ...>).
Hide the definitions behind _KERNEL or _WANT_MIPS_REGNUM, and patch all of
the userland consumers to define as needed.
Discussed with: imp, jhb
Reviewed by: imp, jhb
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D21330
doing so adds more flexibility with less redundant code.
Reviewed by: jhb, markj, kib
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D21250
Add the infrastructure to allow MD procctl(2) commands, and use it to
introduce amd64 PTI control and reporting. PTI mode cannot be
modified for existing pmap, the knob controls PTI of the new vmspace
created on exec.
Requested by: jhb
Reviewed by: jhb, markj (previous version)
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D19514
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
fcmpset returns true/false as a int, so make the return types and
variables match the int to be consistent with other arch.
Reviewed by: cognet@
Differential Revision: https://reviews.freebsd.org/D18557
MIPS64 has 64-bit longs, so use uint64_t for it, otherwise uint32_t.
sizeof(long) == sizeof(ptr) for all platforms, so define
atomic_swap_ptr in terms of atomic_swap_long.
Submitted by: hps@
Replace a call to DELAY(1) with a new cpu_lock_delay() KPI. Currently
cpu_lock_delay() is defined to DELAY(1) on all platforms. However,
platforms with a DELAY() implementation that uses spin locks should
implement a custom cpu_lock_delay() doesn't use locks.
Reviewed by: kib
MFC after: 3 days
All platforms except powerpc use the same values and powerpc shares a
majority of them.
Go ahead and declare AT_NOTELF, AT_UID, and AT_EUID in favor of the
unused AT_DCACHEBSIZE, AT_ICACHEBSIZE, and AT_UCACHEBSIZE for powerpc.
Reviewed by: jhb, imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D17397
Move definitions from cpuregs.h into the cca.h, and include cca.h into vm.h.
This is required to make MIPS MD memattr definitions usable in userspace.
Sponsored by: The FreeBSD Foundation, Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D15583
- Change pcpu zone consumers to use a stride size of PAGE_SIZE.
(defined as UMA_PCPU_ALLOC_SIZE to make future identification easier)
- Allocate page from the correct domain for a given cpu.
- Don't initialize pc_domain to non-zero value if NUMA is not defined
There are some misconceptions surrounding this field. It is the
_VM_ NUMA domain and should only ever correspond to valid domain
values as understood by the VM.
The former slab size of sizeof(struct pcpu) was somewhat arbitrary.
The new value is PAGE_SIZE because that's the smallest granularity
which the VM can allocate a slab for a given domain. If you have
fewer than PAGE_SIZE/8 counters on your system there will be some
memory wasted, but this is obviously something where you want the
cache line to be coming from the correct domain.
Reviewed by: jeff
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15933
Note that GDB at least implements single stepping for MIPS using software
breakpoints explicitly rather than using PT_STEP, so this has only been
tested via tests in ptrace_test which now pass rather than fail.
- Fix several places to use uintptr_t instead of int for virtual addresses.
- Check for errors from ptrace_read_int() when setting a breakpoint for a
step.
- Properly check for errors from ptrace_write_int() as it returns non-zero,
not negative values on failure.
- Change the error returns for ptrace_read_int() and ptrace_write_int() from
ENOMEM to EFAULT.
- Clear a single step breakpoint when it traps rather than waiting for it
to be cleared from ptrace(). This matches the behavior of the arm port
and in general seems a bit more reliable than waiting for ptrace() to
clear it via FIX_SSTEP.
- Drop the PROC_LOCK around ptrace_write_int() in ptrace_clear_single_step()
since it can sleep.
- Reorder the breakpoint handler in trap() to only read the instruction if
the address matches the current thread's breakpoint address.
- Replace various #if 0'd debugging printfs with KTR_PTRACE traces.
Tested on: mips64
opt_compat.h is mentioned in nearly 180 files. In-progress network
driver compabibility improvements may add over 100 more so this is
closer to "just about everywhere" than "only some files" per the
guidance in sys/conf/options.
Keep COMPAT_LINUX32 in opt_compat.h as it is confined to a subset of
sys/compat/linux/*.c. A fake _COMPAT_LINUX option ensure opt_compat.h
is created on all architectures.
Move COMPAT_LINUXKPI to opt_dontuse.h as it is only used to control the
set of compiled files.
Reviewed by: kib, cem, jhb, jtl
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14941
