pr_comment() did avoid adding surplus space character when a comment
contained it at the end. Now it's also paying attention to tabs.
Taken from: Piotr Stefaniak
indent.c has a special loop that stores tokens from between an if () and
the next statement into a buffer. The loop ignored all newlines, but that
resulted in not calling dump_line() when it was needed to produce the
final line of the buffered up comment.
Taken from: Piotr Stefaniak
Work-around a somewhat complex interaction within the code. From
Piotr's commit [1]:
When pr_comment() calls dump_line() for the first line of a multiline
comment, it doesn't include any indentation - it starts with the "/*".
This is consistent for both boxed and not boxed comments. Where the logic
diverges is in how it treats the rest of the lines of the comment. For box
comments indent assumes that it must not change anything, so lines are
dumped as they were, including the indentation where it exists. For the
rest of comments, it will first remove the indentation to store plain text
of the comment and then add it again where indent thinks it's appropriate
-- this is part of comment re-indenting process.
For continuations of multi-line comments, the code that handles comments
in dump_line() will use pad_output() to create indentation from the
beginning of the line (what indent calls the first column) and then write
string pointed by s_com afterwards. But if it's a box comment, the string
will include original indentation, unless it's the first line of the
comment. This is why tab characters from s_com have to be considered when
calculating how much padding is needed and the "while (*com_st == '\t')
com_st++, target += 8;" does that.
In dump_line(), /target/ is initially set to ps.com_col, so it always
assumes that indentation needs to be produced in this function, regardless
of which line of a box comment it is. But for the first line of a box
comment it is not true, so pr_comment() signals it by setting
ps.n_comment_delta, the negative comment delta, to a negative number which
is then added to /target/ in dump_line() on all lines except the first
one, so that the function produces adequate indentation in this special
case.
The bug was in how that negative offset was calculated: pr_comment() used
count_spaces() on in_buffer, which pr_comment() expected to contain
non-null terminated sequence of characters, originating from whatever
originally was on the left side of the comment. Understanding that
count_spaces() requires a string, pr_comment() temporarily set buf_ptr[-2]
to 0 in hope that it would nul-terminate the right thing in in_buffer and
calling count_spaces() would be safe and do the expected thing. This was
false whenever buf_ptr would point into save_com, an entirely different
char array than in_buffer.
The short-term fix is to recognize whether buf_ptr points into in_buffer
or save_com.
Reference:
[1]
ea486a2aa3
Taken from: Piotr Stefaniak
Fix ioat_release to only set is_completion_pending if DMAs were actually
queued. Otherwise, the spurious flag could trigger an assert in the
reset path on INVARIANTS kernels.
Reviewed by: bdrewery, Suraj Raju @ Isilon
Sponsored by: Dell EMC Isilon
Any .debug or .symbols files under /usr/lib/debug which correspond to
OLD_FILES entries in ObsoleteFiles.inc are also automatically cleaned up
by the delete-old target. Make this also apply to any OLD_DIRS entries.
Reviewed by: emaste
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D8683
This was needed on stable/10. Apparently, sys/param.h supplies CHAR_MAX
on head. Include limits.h anyway, for consistency, and because C says so.
Sponsored by: Dell EMC
when au_user_mask() fails, it's not a failure to set the audit mask,
but to calculate the audit mask -- and hence a condfiguration-file
issue (of some sort).
MFC after: 3 days
Sponsored by: DARPA, AFRL
This allows the driver to be built in a kernel with no FDT support, e.g.
on arm64 with just ACPI.
Obtained from: ABT Systems Ltd
Sponsored by: The FreeBSD Foundation
It is quite specific mode of operation without storing on-disk metadata.
It can be useful in some cases in combination with some external control
tools handling mirror creation and disks hot-plug.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
to create a repo during 'make packages'
This would have been useful for a situation I found myself in where
pkg(8) had been upgraded to a version that wanted the FBSD_1.5 ABI
version but libc.so.7 had not been upgraded, and only provided
FBSD_1.4. I found I needed to update libc in order to run pkg, and I
also needed to use pkg to update libc... Which is why pkg-static
exists, but there's currently no way to tell the build system to use
pkg-static instead of pkg.
This creates a variable PKG_CMD, default value 'pkg', that can be
overridden from the command line.
Reviewed by: gjb
Approved by: gjb
Differential Revision: https://reviews.freebsd.org/D8120
It was an experimental tunable, and is now deemed to be road blocker
for further changes. Time to retire it.
MFC after: 1 week
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D8654
Bring in the most recent copy of NetBSD's db_disasm, to fix bugs and add more
instructions.
* Fix several bugs in the disassembler, most notably the disassembly of the
rlwi* instructions, the original reason for bringing in this change.
* Add more registers to the SPR list
* Add more instructions to the opcode table
Obtained from: NetBSD
MFC after: 2 weeks
Attempt to fix powerpc64 LINT kernel broken by r308000. Netmap's use of
a uint64_t wchan seems odd, but in the interest of minimizing this
change just cast through uintptr_t to silence the compiler warning.
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8669
Sync libarchive with vendor.
Important vendor bugfixes (relevant to FreeBSD):
#821: tar -P cannot extract hardlinks through symlinks
#825: Add sanity check of tar "uid, "gid" and "mtime" fields
PR: 213255
Reported by: Tijl Coosemans <tilj@FreeBSD.org>
MFC after: 1 week
Important vendor bugfixes (relevant to FreeBSD):
#821: tar -P cannot extract hardlinks through symlinks
#825: Add sanity check of tar "uid, "gid" and "mtime" fields
These symbols already appear in the common lib/msun/Symbol.map.
Duplicate entries produce an error with LLVM's LLD linker.
Reviewed by: br
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D8627
- On control request update all status pages, since they may also be
affected if user enables/disables enclosure slots.
- Periodically update element descriptors too, since there is some
hardware where they are changed dynamically.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
The TCP server implementation in dbgport does not track clients, so it
may try to write to a disconected socket resulting in SIGPIPE.
Avoid that by setting SO_NOSIGPIPE socket option.
Because dbgport emulates an I/O port to guest, the communication is done
byte by byte. Reduce latency of the TCP/IP transfers by using
TCP_NODELAY option. In my tests that change improves performance of
kgdb commands with lots of output (e.g. info threads) by two orders of
magnitude.
A general note. Since we have a uart emulation in bhyve, that can be
used for the console and gdb access to guests. So, bvmconsole and bvmdebug
could be de-orbited now. But there are many existing deployments that
still dependend on those.
Discussed with: julian, jhb
MFC after: 2 weeks
Sponsored by: Panzura
passing it to firmware for all Gen3 controllers.
For Thunderbolt controller, keep the legacy behavior i.e. return the SYNCHRONIZE_CACHE command with success status from driver itself.
There is Sysctl parameter 'block_sync_cache' is provided to enable customers either to block/unblock these commands to facilitate
legacy behavior if there is a compatibility issue. Default value for module parameter is to unblock this command.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
and return without processing event in AEN thread, if controller reset is in progress.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
If a SCSI IO times out, then before initiating OCR, now the driver will try to send a
target reset to the particular target for which the IO is timed out. If that also fails,
then the driver will initiate OCR.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
Did the same by setting sc->aen_cmd = NULL when aborting AEN is successful.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
MFI linked list in megaraid_sas driver is used for mfi-mpt pass-through commands.
This list can be corrupted due to many possible race conditions in driver and
eventually we may see kernel panic.
One example -
MFI frame is freed from calling process as driver send command via polling method and interrupt
for that command comes after driver free mfi frame (actually even after some other context reuse
the mfi frame). When driver receive MPT frame in ISR, driver will be using the index of MFI and
access that MFI frame and finally in-used MFI frames list will be corrupted.
High level description of new solution -
Free MFI and MPT command from same context.
Free both the command either from process (from where mfi-mpt pass-through was called) or from
ISR context. Do not split freeing of MFI and MPT, because it creates the race condition which
will do MFI/MPT list.
Submitted by: Sumit Saxena <sumit.saxena@broadcom.com>
Reviewed by: Kashyap Desai <Kashyap.Desai@broadcom.com>
MFC after: 3 days
Sponsored by: Broadcom Limited/AVAGO Technologies
Clear the interrupt state before reading the input char from the
input FIFO. In the current code there is a window between the read
to the data register and the write to the the ICR, during which an
input char will not cause an interrupt.
This fixes the issue by which the serial port input on QEMU freezes
when using the emulated pl011 serial port.
