Also centralize and unify checks to enable ASLR stack gap in a new
helper exec_stackgap().
PR: 239873
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Use traditional explicit leading zero format for hex numbers.
Align P2_ hex values.
Wrap long lines by splitting comments.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
rtsock code was build around the assumption that each rtentry record
in the system radix tree is a ready-to-use sockaddr. This assumptions
turned out to be not quite true:
* masks have their length tweaked, so we have rtsock_fix_netmask() hack
* IPv6 addresses have their scope embedded, so we have another explicit
deembedding hack.
Change the code to decouple rtentry internals from rtsock code using
newly-created rtentry accessors. This will allow to eventually eliminate
both of the hacks and change rtentry dst/mask format.
Differential Revision: https://reviews.freebsd.org/D27451
This sysctl node can generate very verbose output, so don't trigger it
for sysctl -a or sysctl vm.pmap.
Reviewed by: markj, kib
Differential Revision: https://reviews.freebsd.org/D27504
These implementation IDs are defined in the SBI spec, so we should print
their name if detected.
Submitted by: Danjel Qyteza <danq1222@gmail.com>
Reviewed by: jhb, kp
Differential Revision: https://reviews.freebsd.org/D27660
Similar to the recent patch to arm's gdb stub in r368414, allow GDB to
update the contents of most general purpose registers.
Reviewed by: cem, jhb, markj
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
NetApp PR: 44
Differential Revision: https://reviews.freebsd.org/D27642
The SRAT may contain multiple distinct entries that together describe a
contiguous region of physical memory. In this case we were not
coalescing the corresponding entries in the memory affinity table, which
led to fragmented phys_avail[] entries. Since r338431 the vm_phys_segs[]
entries derived from phys_avail[] will be coalesced, resulting in a
situation where vm_phys_segs[] entries do not have a covering
phys_avail[] entry. vm_page_startup() will not add such segments to the
physical memory allocator, leaving them unused.
Reported by: Don Morris <dgmorris@earthlink.net>
Reviewed by: kib, vangyzen
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27620
This caused us to write to the low half of the feature word twice, once with
the high bits and once with the low bits. Common legacy device implementations
seem to be fairly lenient about being able to write to the feature bits
multiple times, but Arm's models use a stricter implementation that will ignore
the second write. This fixes using vtnet(4) on those models.
Reported by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Pointy hat: jrtc27
Fix error in extent_try_coalesce_impl(), which could cause abort
to happen when trying to coalesce extents backwards. The error could
happen because of how extent_before_get() function works. This function
gets address of previous extent, by subtracting page size from current
extent address. If current extent is located at PAGE_SIZE offset, this
address resolved to 0x0000. An assertion in rtree_leaf_elm_lookup
then caused the running program to abort.
This problem was discovered when trying to build world on 32-bit
machines with ASLR and PIE enabled. The problem was encountered
on armv7 and i386 machines, but most likely other 32-bit
architectures are affected as well.
While this patch fixes one problem with buildworld on 32-bit platforms
with ASLR, the build still fails, however it happens much later
and due to lack of memory.
The change is aligned with accepted fix in the upstream Jemalloc
repository (https://github.com/jemalloc/jemalloc/pull/1973).
As it doesn't apply on top of Jemalloc tree, its updated version
was eventually merged: https://github.com/jemalloc/jemalloc/pull/2003
PR: 249937
Submitted by: Dawid Gorecki <dgr@semihalf.com>
Obtained from: Semihalf
Sponsored by: Stormshield
Differential Revision: https://reviews.freebsd.org/D27025
Apply upstream fix 08968baec1122a58bb90d8f97ad948a75f8a5d69:
Fix error cases when udp-connect is set and send() returns an error
Obtained from: unbound git
MFC after: 3 days
instead of bailing out with EBUSY if there are any.
If driver module is unloaded, or just device is forcibly detached from
the driver, there is no way for driver to correctly unload otherwise.
Esp. if there are resources dedicated to the VFs which prevent turning
down other resources.
Reviewed by: jhb
Sponsored by: Mellanox Technologies / NVidia Networking
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D27615
- support VNC version 3.3 (macos "Screen Sharing" builtin client)
- wait until client has requested an update prior to sending framebuffer data
- don't send an update if no framebuffer updates detected
- increase framebuffer poll frequency to 30Hz, and double that when
kbd/mouse input detected
- zero uninitialized array elements in rfb_send_server_init_msg()
- fix overly large allocation in rfb_init()
- use atomics for flags shared between input and output threads
- use #defines for constants
This work was contributed by Marko Kiiskila, with reuse of some earlier
work by Henrik Gulbrandsen.
Clients tested :
FreeBSD-current
- tightvnc
- tigervnc
- krdc
- vinagre
Linux (Ubuntu)
- krdc
- vinagre
- tigervnc
- xtightvncviewer
- remmina
MacOS
- VNC Viewer
- TigerVNC
- Screen Sharing (builtin client)
Windows 10
- Tiger VNC
- VNC Viewer (cursor lag)
- UltraVNC (cursor lag)
o/s independent
- noVNC (browser) using websockify relay
PR: 250795
Submitted by: Marko Kiiskila <marko@apache.org>
Reviewed by: jhb (bhyve)
MFC after: 3 weeks
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D27605
The argument is a void * so there's no need to cast it to caddr_t.
Update documentation to match function decleration.
Reviewed by: freqlabs
Obtained from: CheriBSD
MFC after: 1 week
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27093
Similar to r366897, this uses the .incbin directive to pull in a
firmware file's contents into a .fwo file. The same scheme for
computing symbol names from the filename is used as before to maximize
compatiblity and not require rebuilding existing .fwo files for
NO_CLEAN builds. Using ld -o binary requires extra hacks in linkers
to either specify ABI options (e.g. soft- vs hard-float) or to ignore
ABI incompatiblities when linking certain objects (e.g. object files
with only data). Using the compiler driver avoids the need for these
hacks as the compiler driver is able to set all the appropriate ABI
options.
Reviewed by: imp, markj
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27579
- Use [u]intptr_t casts to convert pointers to integers.
- Change IS_ERR* to return bool instead of long.
Reviewed by: manu
Obtained from: CheriBSD
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D27577
Start with a slightly modified version of the SVN commit template, to
allow developers to experiment. This will be updated in the future as
our process and techniques evolve.
This can be installed by copying or symlinking into the .git/hooks/
directory.
Feedback from: cem, jhb
Reviewed by: imp
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D27633
Since we do not own the session lock, a parallel killjobc() might
reset s_leader to NULL after we checked it. Read s_leader only once
and ensure that compiler is not allowed to reload.
While there, make access to t_session somewhat more pretty by using
local variable.
PR: 251915
Submitted by: Jakub Piecuch <j.piecuch96@gmail.com>
MFC after: 1 week
luacheck rightfully complains that i is unused in the show-module-options
loop at the end (it was used for some debugging in the process).
We've added a new pager module that's compiled in, so declare that as an
acceptable global.
This effectively dumps everything lualoader knows about to the console using
the libsa pager; that particular lua interface was added in r368591.
A pager stub implementation has been added that just dumps the output as-is
as a compat shim for older loader binaries that do not have lpager. This
stub should be moved into a more appropriate .lua file if we add anything
else that needs the pager.
This is just a minor optimization, but it's sensitive. This gives an improvement of 30-50 kpps.
Reviewed by: kp, markj, glebius, lutz_donnerhacke.de
Approved by: vmaffione (mentor)
Sponsored by: vstack.com
Differential Revision: https://reviews.freebsd.org/D27382
Add capability to SPIBUS to have child device with IRQ.
For example many ADC chip have a dedicated pin to signal "data ready"
and the host can just wait for a interrupt to go out and read the result.
It is the same code as in R282674 and R282702 for IICBUS by Michal Meloun
Submitted by: Oskar Holmund <oskar.holmlund@ohdata.se>
Differential Revision: https://reviews.freebsd.org/D27396
Remove the exynos SoC support, this haven't been updated in a while,
isn't present in GENERIC and nobody is motivated to resurect it.
Differential Revision: https://reviews.freebsd.org/D24444
Third-party code tests for strerror_l(3) without specifying
_POSIX_SOURCE, and then expects that the function is prototyped with
_POSIX_SOURCE set to 200112.
Reported and tested by: antoine
Sponsored by: The FreeBSD Foundation
MFC after: 13 days
Enforce the requirement that the RX callback cannot be called after a reset until the features have been negotiated.
This fixes a race condition where the receive callback is called during a device reset.
Reviewed by: vmaffione, grehan
Approved by: vmaffione (mentor)
Sponsored by: vstack.com
Differential Revision: https://reviews.freebsd.org/D27381
Now that sparc64 has been removed, there are no kernels built with
support for the VTOC8 partitioning scheme by default. Remove the option
from the installer, as it is unsupported on all installer images
produced by re@.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D27641
The existing logic is nice in theory, but in practice freebsd-update will
not preserve the timestamps on these files. When doing a major upgrade, e.g.
from 12.1-RELEASE -> 12.2-RELEASE, pwd.mkdb et al. appear in the INDEX and
we clobber the timestamp several times in the process of packaging up the
existing system into /var/db/freebsd-update/files and extracting for
comparisons. This leads to these files not getting regenerated when they're
most likely to be needed.
Measures could be taken to preserve timestamps, but it's unclear whether
the complexity and overhead of doing so is really outweighed by the marginal
benefit.
I observed this issue when pkg subsequently failed to install a package that
wanted to add a user, claiming that the user was removed in the process.
bapt@ pointed to this pre-existing bug with freebsd-update as the cause.
PR: 234014, 232921
Reviewed by: bapt, emaste
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D27635
This is the final half of splitting r358153 in two, in order to avoid a build
system bugs and being able to merge an earlier change to previous releases.
Add a note to UPDATING to avoid people building from very old systems from
having issues with mergemaster
MFC after: 3 days (only 12-stable)
Differential Revision: https://reviews.freebsd.org/D23621
Although it is not often needed, the nfscbd(8) should be running when
NFSv4 mounts are done if callback functionality is required.
Callback functionality is required for the NFSv4 server to issue
delegations or pNFS layouts.
This patch adds nfscbd to the mountcritremote's REQUIRED line
to ensure it is started before NFS mounts specified in /etc/fstab
are done.
Reviewed by: 0mp
Differential Revision: https://reviews.freebsd.org/D27506
