Instead, reverse the order of the testing, so if a symbolic name starts with
a digit, we'll see if we can make a network address out of it first. If
that fails, then we'll call getnet...
the connection after an unexpected loss of carrier:
set reconnect timer ntries
The man page warns against using this command when your
timeout value is slightly more than the other sides :{}
Suggested by: burton@bsampley.vip.best.com (Burton Sampley)
Delete bogus local versions of mount*.[ch] and nfs_prot*.[ch].
Use v3 protocol by default for NFS mounts. If v3 is not supported, v2 is
used automatically. Add a new mount options for NFS, 'nfsv2' to allow the
administrator to force the use of the older protocol.
Document the new mount options and fix a couple of markup problems.
pppd now creates /var/run/ttyXn.if file containing the interface name;
check that a 'login' user is not listed in /etc/ppp/ppp.disabled;
check that a 'login' user's shell is listed in /etc/ppp/ppp.shells;
make sure that passwordless 'login' logins are recorded in wtmp and
utmp.
and chap-secrets files. This allows specific users
to have pre-allocated IP numbers while others get
assigned dynamically.
Submitted by: David Nugent <davidn@unique.usn.blaze.net.au>
list has been dialed. Alternate number dialing has no "pause".
Suggested by: joerg
Document this behaviour. Document that the number of dial attempts
applies to the number of phone calls rather than the number of times
each number is dialed. Add a missing .El. Give a decent description
of how to connect to an ISP.
in the transfer request actually exist. Technically ypxfr can do this too,
but why waste the cycles getting ypxfr off the ground for a transfer we
already know is going to fail.
Also apply stricter access control rules; ypproc_xfr_2_svc() is in a
different class than the normal map access procedures procedures.
nfs requests from non-privileged ports.
Change mountd such that it does never set this variable, but only clears
it when run with -n. Also document this in the man page.
and quitting telnet immediately (while phone number dialed)
Log client connection/disconnection with PHASE_BIT now.
Add more error recovery on client disconnection
(presumably because the kernel is old). Moved the declaration of a
variable realated to this sysctl outside of an unrelated ifdef.
Not fixed:
- this sysctl is badly named (nfs occurs twice).
- it's silly to have for FreeBSD in FreeBSD code, especially when
only half of the FreeBSD-dependent code is ifdefed.
in uu_lock(). Add uu_lockerr() for turning the results of
uu_lock into something printable. Remove bogus section in man page
about race conditions allowing both processes to get the lock.
Include libutil.h and use uu_lock() correctly where it should.
Suggested by: ache@freebsd.org
in the Lite2 merge to not export some nfs constants. It started causing
warnings when I added a kernel-only #define for DIRBLKSIZ.
Removed `#define NFS'. This was an old, bad interface for telling
<sys/mount.h> to export nfs stuff.
it's done for pci. This is so that systat and vmstat can get at the
interrupt counts for the Inter-Processor Interrupts when running a smp
kernel. This doesn't affect the normal kernel, but makes life easier for
the smp people who don't have to track two versions of config.
vnconfig doesn't seem to be in Lite2, although dev/vn is. The Lite2
merge in userland has converted all mount calls except this one and
one for devfs in init, so we can drop support for old mount args soon.
Vnconfig probably shouldn't support mounting - it only supports ufs.
non-standard and not used. "port auto" is equal to "port?" or missing "port"
keyword now. "port none" is really probe routine task (return -1 for
no ports).
I suspect it was because the child exec code's parent was doing the
initial lookups, then forking, then doing other things (possibly trashing
the static data in the getpw*() buffer), then attempting to dereference
*pwd and *lc. Also, no error checking appeared to be done - I've allowed
it to fall back to the old "become user" code on critical failure rather than
risk running a user's cron jobs as root.
Accept SIGHUP as a "re-open logfile" signal. As ppp
doesn't set it's serial line to it's controlling terminal,
we can use HUP :)
This is a candidate for 2.2. The log.[ch] changes won't
conflict, but the main.c changes will. We just want to change the
kill(...,SIGHUP) to a SIGTERM and change the signal(SIGHUP,Hangup)
to a pending_signal(SIGHUP,LogReOpen).
These changes should fix the signal "problems" in ppp.
The signal changes should really be put into 2.2 too !
The following patches should do it. There were some other
changes made by Andrey recently that havn't been brought
into 2.2, it may be worth doing them now.
2. fix a potential buffer oflow,
3. makes watch(8) conform to sysexits(3).
Not a strong 2.2 candidate even if it would be nice.
Reviewed by: joerg, imp
was not setting the version number in the nfs_args data to mount(2), so it
was returning EFAULT. Perhaps the nfs_args version number was something
we added at some point?
to try and work around the nfsv3 headers in the post-lite2-kernel era.
This program somehow manages to make just about every #include conflict
with everything else. :-(
This puts it on the same footing as cvsup. It's been suggested on
numerous occasions that I shouldn't have imported it in the first place,
and now that sup has outlived it's usefulness..... Boom!
we need now.
Don't assume that file descriptor can't be 0 (many places)
Protect FD_* macros from being used with negative descriptors
Shorten MS EXT show help to fit 80 cols
dangerous! Signal handlers themself must be fixed to not call malloc,
but no pended handlers, it will be correct fix. In finite case each signal
handler can set some variable which will be analized later, but calling
handler functions manually is too dangerous (f.e. signals not blocked while
the handler or handlers switch executed in this case). Of course this
code can be fixed instead of removing, but it not worth fixing in any case.
Should go into 2.2
In addition sig.c code shows following dangerous fragments (there can be more,
but I stop after two):
This fragment
if (fn == SIG_DFL || fn == SIG_IGN) {
handler[sig-1] = (sig_type)0;
<------------- here
signal(sig,fn);
} else {
cause NULL pointer reference when signal comes
"here", but more worse fragment is below:
void handle_signals() {
int sig;
if (caused)
for (sig=0; sig<__MAXSIG; sig++, caused>>=1)
if (caused&1)
(*handler[sig])(sig+1);
}
caused is bitmask which set corresponding bit on each signal coming.
And now imagine, what happens when some signal comes (bit sets) while loop
is executed (see caused>>=1 !!!)
In this light carrier drop situation was (as gdb shows)
1. SIGSEGV in handle_signals because some junk called as *handler reference.
2. Since SIGSEGV was pended too (== never happens),
it can cause various range of disasters.
from /var/mail, added a routine to delete the removed user's files
from /tmp, /var/tmp, & /var/tmp/vi.recover, and added code to kill any
running processes owned by the removed user). I've also added a flag
for non-interactive execution, cleaned up the man page, and adjusted
my address.
Submitted by: ghelmer@cs.iastate.edu (Guy Helmer)
the password file into /etc/master.passwd and optional (-p) into
/etc/passwd. Enable this feature with the compile
option -DPASSWD_IGNORE_COMMENTS.
The character `#' introduces a comment. Leading spaces and tabs are
ignored: '^[ \t]*#.*\n$'
Count an empty line - only spaces, tabs or newline - also as a comment.
An empty line at the bottom of /etc/master.passwd is a common
novice error and increased my mail load: '^[ \t]*\n$'
1) When carrier dropped, old variant often forget to detect it cause
unkillable loop forever (because SIGTERM pended too, but it will be
separate commit)
2) Time intervals accuracy reasons
Should go into 2.2
life easier if a PS/2 mouse locks up the keyboard (frequent-ish,
but not repeatable).
Tidy up code (a bit) and make it -Wall
Is this a 2.2 candidate ? (although it doesn't -Wall in 2.2 because
of the lack of sys/sysproto.h
Remove #include's from sig.h and get dependant modules to include them
themselves. Make inclusion of if_var.h depend on __FreeBSD_version so
that the -current version of ppp can be used with 2.1.*
2.2 Candidate ?
stable now at a customer's site.
Finally add the ability to syslogd to pipe particular messages through
an arbitrary filtering command. Idea stolen from IRIX.
This code is courtesy of the interface business GmbH, Dresden.
Comment about whether to also merge this into 2.2 or not, please.
Reviewed by: (long ago) peter
All signal() calls have been changed to pending_signal() calls.
pending_signal() is defined in the new sig.c file. It remembers
the handler and traps the signal with a function that will remember
the signal.
main.c now calls handle_signals() to actually call the required
handlers (if the above handler was called).
If this doesn't close PR2662 (was PR2347), I'll cry.
Joerg, I think this should go into 2.2, but I havn't done anything
about it because I'm bound to botch it with the new sig.[ch] files.
I've just "cvs add"'d sig.[ch] so far.... can you update to 2.2 and
tell me what you did ? Thanks.
2. Back out my change to ask about UTC/Localtime here. This *really* needs
to be done in tzsetup instead since putting it here only handles about
1/4 of the places where it needs to be.
Now that this is becoming (dare I even say it?) more useful for
post-configuration, no longer leave sysinstall.debug files around
by default. Only do this if environment variable SYSINSTALL_DEBUG
is set.
so that we're more useful in multi-user mode. This is still not
100%, but it pulls in a lot more than it used to. Some of the "composite"
variables in /etc/sysconfig are going to take more work.
o Always write /etc/resolv.conf and /etc/hosts if it makes sense to do
so.
o Reset media properly when reselecting. Longstanding bogon.
o Pull SIGPIPE handling out of package.c; I'm actually hoping to handle
this differently shortly.
o Fix bug where cancel in TCP setup dialog still checked data fields.
I think this closes a PR, but I will have to go look.
- servers should be the first target listed in 'all:' in order for slave
servers to be updated correctly: yppush reads the ypservers map to figure
out where all the slaves are, so it needs to be loaded onto the master
ASAP.
- Fixed small bogon in publickey target which nobody has noticed since
we're not using the publickey.byname map yet.
Rev 1.4 deraadt: (partial from full commit, other files not done yet)
proactive bounds checking; help from millert
Rev 1.5 millert:
Possible buf oflow.
Plus minor style nits to keep the style police happy (I hope)
Obtained from: OpenBSD
server to bind to. This works until you send it a SIGHUP with a
new service defined ... the new service is bound to INADDR_ANY.
This patch fixes this bug (in both RELENG_2_2 and -current).
This is a 2.2 candidate..(i.e. pure bug fix)
Submitted by: Archie Cobbs (archie@whistle.com)
at the time, but on further reflection..." bucket with these changes.
1. Checking the media before frobbing the disks was a fine idea, and
I wish it could have worked, but that leads to a rather difficult
situation when you need to mount the media someplace and you're about
to:
a) Chroot away from your present root.
b) Newfs the root to be.
You're basically screwed since there's no place to stick the mount
point where it will be found following the newfs/chroot (and eliminating
the chroot in favor of just using the "root bias" feature would work
great for the distributions but not the pkg_add calls done by the
package installer).
2. Automatic timeout handling. I don't know why, but alarm() frequently
returns no residual even when the alarm didn't go off, which defies
the man page but hey, since when was that so unusual? Take out timeouts
but retain the code which temporarily replaces the SIGINT handler in
favor of a more media-specific handler. This way, at least, if it's hanging
you can at least whap it. I think the timeout code would have been losing
over *really slow* links anyway, so it's probably best that it go.
This should fix NFS, tape & CDROM installs again (serves me right for getting
complacent and using just the FTP installs in my testing).
more consistant in our use of the terms for differentiation between PC
partitions and traditional BSD partitions.
Submitted-By: obrien@cs.ucdavis.edu (David O'Brien)
section was a good thing, since it made it possible to detect media problems
*before* the installation started, but it also caused various things to
be mounted BEFORE the chroot() call, which definitely messes things up.
Fix this by detecting the pre-chroot() case and mounting into a subdir.
This will probably need to go away again someday when distributions get
folded into packages and there are no more dist files to check, but knowing
how long we've been waiting on THAT, this will be a welcome tool for the
interim.
Submitted by: Robert Nordier <rnordier@iafrica.com>
We could also make this stuff only come out when getpid() != 1
and thus avoid the install case (where it really is just too verbose,
and people have complained), but this seems less messy and no one
complained when tzsetup didn't print the final "things went fine!"
messages (which sort of contravene the UNIX spirit of only yelling
when you need to anyway).
Use setusercontext() rather than setuid()/setgid()/setlogin()/initgroups()
which is all handled. Login environment is NOT set by this call as crontab
provides its own means of doing so.
yp_next_record() is called without a key (from xdr_my_ypresp_all()),
in which case it returns the first key in the map. When doing this,
it also needs to update the key index in the map queue entry. Without
this, ypproc_all_2_svc() (and hence ypcat) don't work correctly.
Noticed by: Michael L. Hench <hench@watt.cae.uwm.edu>
- Use MAP_FAILED instead of the constant -1 to indicate
failure (required by POSIX).
- Removed flag arguments of '0' (required by POSIX).
- Fixed code which expected an error return of 0.
- Fixed code which thought any address with the high bit set
was an error.
- Check for failure where no checks were present.
Discussed with: bde
going into SLIP mode, useful for scripts that can automatically
grok IP addresses ala Trumpet Winsock.
Closes PR#2293
Submitted-By: andrew@fortress.org
bogus path and FTP I/O errors much earlier, offer retry possibilities
at steps along the way so you don't have to resume from the very beginning
again on a hard error.
1. Bus mouse selection didn't show up properly in mouse menu.
2. U&G management screen didn't respect cancel properly.
3. Novice not prompted to add users or set root password during installation.
4. Username length changes screw up user management form.
This will make a number of things easier in the future, as well as (finally!)
avoiding the Id-smashing problem which has plagued developers for so long.
Boy, I'm glad we're not using sup anymore. This update would have been
insane otherwise.
terminate(). This makes doubly sure we don't trip the SIGTERM handler
in a child process. Suggested by: phk.
- It's int main(argc, argv), not void main(argc, argv), gosh darn it.
- If a child receives a SIGTERM, it will call the terminate() function
and end up doing the shutdown procedurs that should really only be
done by the parent. Set the SIGTERM behavior back to SIG_DLT in the
child after fork()ing.
- If the parent fails to read data back from the child because the
child has exited, it will call rpc_received() with bogus tdata that
can cause the parent to SEGV. Make handle_children() detect this
condition correctly and handle it sanely.
*sigh* Another 2.2 candidate.
This has the effect of making every link a "passthrough" which means the
TCP or UDP port won't be freed after link deletion -- so there could be
eventual port exhaustion if the program were allowed to operate long
enough.
Submitted by: Charles Mott <cmott@srv.net>
to be used to expand things beyond the size of the buffer passed in. Also
do a general cleanup of sprintf -> snprintf as well as strcpy and strncat
safety. Also expand some buffers to allow for the largest possible data
that might be used.
This is a 2.2 candidate. However, it needs to be vetted on -current
since little testing has been done on this due to my lack of PPP on
this machine.
Reviewed by: Jordan Hubbard, Peter Wemm, Guido van Rooij
- Fail YPPROC_ALL requests when we hit the child process limit. This
is a little harsh, but it helps prevent the parent from blocking
and causing other requests to time out.
yp_dnslookup.c:
- Check for duplicate RPC transaction IDs that indicate duplicate
requests sent due to RPC retransmissions. We don't want to send
a second DNS request for the same data while an existing request
is in progress.
- Fix small formatting bogon in snprintf() in yp_async_lookup_addr().
Use consistent spelling throughout.
Remove unmount in fixit_common() since that's bogus in the CDROM case and
properly "shut down" the media device instead.
- Try to have all output go through the routines in util.c [logerr(),
log_1s(), die()]
- Add *some* code in util.c to allow pccardd to run out of sysinstall.
Submitted by: Mostly me, but some by Tatsumi Hosokawa <hosokawa@jp.FreeBSD.org>
Disable saving of SCSI device parameters in userconfig saving in hopes
of working around a reported problem in the no-device case; there's no
point in saving this information here anyway.
2nd patch submitted-by: "Eric L. Hernes" <erich@lodgenet.com>
bug in syslogd which causes it to die after random amounts of time (widely
reported), this at least allows the administrator to easily restart it
without wondering why it simply exits again each time.
if wrong version.
2. Make sure network device is initialized in ftpInit
3. Eliminate bogus size values in the menus. For now, we'll have to admit
that nobody's added it up yet. In the future, these menus should be
build dynamically anyway, not declared static.
4. Add more debugging to networking code to chase the mystery ppp device
problem.
assume that the timeval will be preserved. As the man page says:
".. it is unwise to assume that the timeout value will be unmodified
by the select() call." This happens on Linux and on my system at least.
useradd -m or useradd -D -b are used.
2) Hyphen allowed in username if not first character. Fix trivial
bug in error fmt string.
3) /etc/skeykeys updating changed to do 'inplace' update, commenting
out a username rather than removing it completely.
