The normal LIBADD is ssp_nonshared. This also had a DPADD on LIBSSP which
does not actually exist, it is blank.
Sponsored by: EMC / Isilon Storage Division
it and then chmod back. There's no chmod -push / chmod -pop so hard
code 444 as the right permissions here.
Also, fix more stray detritus that crept in (out?) while re-arranging
the deck chairs.
The erase size is reported by the nvram info command.
Submitted by: Paul Fox <pfox at solarflare.com>
Reviewed by: gnn
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4386
It was allowed before, but make it very explicit it is allowed now. And
prefer 'bool' to older types that were used for the same purpose -- int and
boolean_t.
Like with the C99 fixed-width types, use common sense when changing old
code.
No igor regressions.
Suggested by: bde <20151205031713.T3286@besplex.bde.org>
Reviewed by: glebius, davide, bapt (earlier versions)
Reviewed by: imp
Feedback from: julian
Sponsored by: EMC / Isilon Storage Division
Differential Revision: https://reviews.freebsd.org/D4384
- Restore R92C_TXDW4_HWSEQ_EN bit - it is used by non-8188EU chips.
- Fix DRVRATE bit usage.
Tested with:
- RTL8188EU, STA mode.
- RTL8188CUS, STA mode.
Reviewed by: kevlo
Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D4352
While here update for armv6 to a tested value.
Submitted by: Howard Su <howard0su@gmail.com>
Reviewed by: stat
Differential Revision: https://reviews.freebsd.org/D4315
LLE structure is mostly unchanged during its lifecycle.
To be more specific, there are 2 things relevant for fast path
lookup code:
1) link-level address change. Since r286722, these updates are performed
under AFDATA WLOCK.
2) Some sort of feedback indicating that this particular entry is used so
we re-send arp request to perform reachability verification instead of
expiring entry. The only signal that is needed from fast path is something
like binary yes/no.
The latter is solved by the following changes:
1) introduce special r_skip_req field which is read lockless by fast path,
but updated under (new) req_mutex mutex. If this field is non-zero, then
fast path will acquire lock and set it back to 0.
2) introduce simple state machine: incomplete->reachable<->verify->deleted.
Before that we implicitely had incomplete->reachable->deleted state machine,
with V_arpt_keep between "reachable" and "deleted". Verification was performed
in runtime 5 seconds before V_arpt_keep expire.
This is changed to "change state to verify 5 seconds before V_arpt_keep,
set r_skip_req to non-zero value and check it every second". If the value
is zero - then send arp verification probe.
These changes do not introduce any signifficant control plane overhead:
typically lle callout timer would fire 1 time more each V_arpt_keep (1200s)
for used lles and up to arp_maxtries (5) for dead lles.
As a result, all packets towards "reachable" lle are handled by fast path without
acquiring lle read lock.
Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler
might keep LLE lock for signifficant amount of time, which might not be feasible
for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock).
Differential Revision: https://reviews.freebsd.org/D3688
Boundary Trace to assembly to reduce the overhead of these checks.
Submitted by: Howard Su <howard0su@gmail.com>
Relnotes: Yes
Differential Revision: https://reviews.freebsd.org/D4266
suppression but the version of the IOAPIC reported is 0x11 and neither
IOAPIC EOIR nor the Linux trick of temporal reprogramming of the pin
to edge-trigger mode to issue EOI work.
Disable eoi suppression if KVM is detected. The mode can still be
forced with the tunable.
Reported and tested by: Roman Mamontov <mr.xanto@gmail.com>
Sponsored by: The FreeBSD Foundation
ptes mapping the kernel on CPUs where global TLB entries are
supported, revert to flushing only non-global entries, i.e. to the
pre-r291688 state. There is no need to flush global TLB entries,
since only global entries created during the previous iterations of
the loop could exist at this moment.
Submitted by: alc
Differential revision: https://reviews.freebsd.org/D4368
Required to build with -Werror=unused-but-set-variable.
Keep it under #if 0 as a reminder for parse error processing.
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
The SFL9122 "Huntington" controller was never built.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Submitted by: Artem V. Andreev <Artem.Andreev at oktetlabs.ru>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4355
Build with ../nanobsd.sh -c rpi.cfg, for example.
This can be done as a normal user.
This is a work in progress. It relies on the new nopriv
build stuff committed to nanobsd, but isn't complete yet.
Currently, one must copy files into the DOS partition
in the image. Also, ownership isn't preserved because
this doesn't use the new mtree-dedup.awk yet, but rather
some crazy mtree stuff. The image building bits will
move up into nanobsd when they are ready.
Also includes very preliminary support for building qemu
images for all platforms that we can for qemu. It is
missing aarch64, and we put the image on s2 instead of
s1 and mkimg can't mark s2 as active, so there's some
issues. Oh, and I didn't do it for arm.
Take a look, kick the tires, expect problems.
- Create automatically generated include header for split.c
main.c:
- Use function definitions from debug.ih and split.ih instead of externs
Sponsored by: EMC / Isilon Storage Division
(and soon augmented by nanobsd), performs the actions documented in
the script, and then spits out a new mtree file suitable for feeding
to makefs.
Discussed on: arch@
appropriate. First step in supporting a build w/o root. More to
follow as actions by customization scripts are not (yet) recorded in
the metalog, and duplicate entries in it aren't removed.
being in the environment. Also filter out the new SRC_ENV_CONF as
well. If you really need these set, set them in your config file,
not in the build environment used to launch nanobsd.
Pointed out by: bdrewery@
o Move SRCCONF and __MAKE_CONF into the environment to cope with
file paths with spaces in them better.
o Move the rest of the variable setting command line args into
__MAKE_CONF files.
o Trace the commands that we're using to build so they appear at the
top of the log.
o Be more consistent about quoting paths for cd and similar commands
to better cope with paths with spaces in them, though some more
work is likely needed.
o Add some comments about all this.
o Minor formatting tweaks in a couple places
Sponsored by: Netflix, Inc
Currently rc scripts implementing their own start_cmd do not enjoy the
benefits of rc.subr's own check for rc_pid.
This leads to around a third of ports with such a start_cmd not to check for
the process at all and two thirds of ports to re-implement this check
(sometimes wrongly).
This patch moves the check for rc_pid to before ${rc_arg}_cmd is executed.
Submitted by: Dirk Engling
Reviewed by: feld
MFC after: 1 week
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D4156
My changes in r291635 broke 'make install*' for DIRDEPS_BUILD but also
revealed that some other targets were not guaranteed to be created if
there was a SUBDIR defined. One example is 'installfiles' was never
defined if SUBDIR was not empty.
Sponsored by: EMC / Isilon Storage Division
The problem was that 'afterinstall' was not coming after SUBDIRs were
installed which was the expectation at least in sys/modules for kldxref.
Reported by: np
Pointyhat to: bdrewery
Sponsored by: EMC / Isilon Storage Division
If, for example, a VF is configured to use a 1500 byte MTU, but the port
it is attached to is set to 9000 bytes, overlength frames can be received
by the VF. As Huntington scatters by default, these overlength packets
would be scattered across several descriptors, with all except the last
having the CONT bit set.
To avoid this, disable scatter when creating RXQs if the firmware
supports doing so, which all recent versions do. Then we only get
a single descriptor from an overlength frame. This will have the CONT
bit set to indicate it was truncated, so we can discard it.
Submitted by: Mark Spender <mspender at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4354
Submitted by: Paul Fox <pfox at solarflare.com>
Sponsored by: Solarflare Communications, Inc.
MFC after: 2 days
Differential Revision: https://reviews.freebsd.org/D4353
