compatible AC97 codec.
- As the driver supports so many variants, create a table ids for
ease of probing and maintenance.
Submitted by: yongari
Reviewed/Tested by: multimedia@
- From luigi:
The code to compute fragment sizes in the ich driver almost
invariably ends up using the full buffer available, no matter
how the user specifies fragment size and number.
With audio telephony (8khz, 16bit-stereo) and the 16k buffer
size this results in an unbearable 500ms delay.
This patch makes sure that we never use more than 4 fragments,
(i don't think we need more unless there are huge interrupt
servicing latencies), and obey to the requested fragment size,
so that latency is acceptable.
Based on this (and after much regression tests), I can conclude
that this driver works best with 2 fragments, thus solving various
long standing issues of ICH driver not capable to flush or play
short files perfectly.
Suggested by: luigi (the idea of smaller fragments)
- MPSAFE conversion.
Approved by: netchild (mentor)
distinct hardware playback channels. DAC configuration can be
accessed through kernel hint - hint.pcm.<unit>.dac="val" with
following possible values:
0 = Enable both DACs (default)
1 = Enable single DAC (DAC1)
2 = Enable single DAC (DAC2)
3 = Enable both DACs, swap position (DAC2 comes first instead
of DAC1)
Special case for ES1370:
Unlike ES1371,2,3/CT5880, volume for each DAC 1 and 2 can be
controlled indepedently (synth for DAC1, pcm for DAC2). It is
possible that user will confuse by this behaviour, since both
DACs are enabled by default. Thus, provide a knob through sysctl
hw.snd.pcm<unit>.single_pcm_mixer:
0 = each DACs will be controlled separately (synth/pcm).
1 = combine both DACs volume mixer controller into a single
"pcm" (default)
As a side note, fixed rate operation (provided by previous
commit) is not a mandatory if the configuration space does not
involve DAC2 (perhaps disabled by user through the above kernel
hint). Unlike DAC2, DAC1 has its own register / control space,
not affected by the speed settings of ADC.
Tested by: multimedia@
Approved by: netchild (mentor)
mask to recdev_l and recdev_r, since each have its own unique mask.
Submitted by: Watanabe Kazuhiro <CQG00620@nifty.ne.jp>
Approved by: netchild (mentor)
o Change the result of gctl(001) now that a bogus verb still requires
a valid geom,
o Insert gctl(024) to test for an appropriate error when a bogus verb
is given that does have a proper geom parameter.
verbs. Only the create verb operates on a provider. All other verbs
operate on a GPT geom. Also, the GPT entry oriented verbs require
a non-downgraded GPT.
o Have all verbs take an optional flags parameter. The flags parameter
is a string of single-letter flags. The typical use of these flags
is to enable certain behaviour in support fo the gpt(8) tool.
o Add dummy implementations for the destroy and recover verbs.
This change causes test 2 of the GPT regression test suite to fail.
The presence of a geom parameter is now required even for unknown
verbs.
If the packet is rejected from pfil(9) then continue the loop rather than
returning, this means that we can still try to send it out the remaining
interfaces but more importantly the mbuf is freed and refcount decremented on
exit.
just discard the received frame and reuse the old mbuf.
This should prevent the connection from stalling after high network traffic.
MFC after: 2 weeks
a new mbuf, just discard the received frame and reuse the old mbuf.
This should fix kernel panics on high network traffic.
Obtained from: NetBSD (joerg@)
MFC after: 2 weeks
It may be the case that you may hear some unwanted noise while
playing back with 24/32 bit. This is a problem in the USB system.
Explanation from Hans Petter Selasky:
---snip---
The current USB sound driver only uses one isochronous
buffer, that is restarted when it is completed. This will lead to a short
period of time, +1ms, where no sound data is sent to the external USB device.
Depending on the load of your computer, this can be as much as 50ms. So the
USB sound driver must use 2 isochronous transfers. At the beginning one will
queue both. Then these are restarted on completion. This will result in a
constant-rate data stream to the external sound device, a minimum sound
buffer equal to the size of the isochronous buffer, and possibly the sound
will reach your ears with less delay. Little delay is a result of constant
data rate. Currently only my USB driver will support that. If one tries that
with the USB driver in *BSD, then it will crash at the first moment one gets
a buffer underrun.
---snip---
Submitted by: Kazuhito HONDA <kazuhito@ph.noda.tus.ac.jp>
Mono-recording still not tested by: julian
kernel memory and not using sysctl. Previously, libmemstat was used
only for the live kernel via sysctl paths.
This results in netstat output becoming both more consistent between
core dumps and the live kernel, and also more information in the core
dump case than previously (i.e., mbuf cache information).
Statistics relating to sfbufs still rely on a kvm descriptor as they
are not currently exposed via libmemstat. netstat -m operating on a
core is still unable to print certain sfbuf stats available on the live
kernel.
MFC after: 1 week
reliability when tracing fast-moving processes or writing traces to
slow file systems by avoiding unbounded queueuing and dropped records.
Record loss was previously possible when the global pool of records
become depleted as a result of record generation outstripping record
commit, which occurred quickly in many common situations.
These changes partially restore the 4.x model of committing ktrace
records at the point of trace generation (synchronous), but maintain
the 5.x deferred record commit behavior (asynchronous) for situations
where entering VFS and sleeping is not possible (i.e., in the
scheduler). Records are now queued per-process as opposed to
globally, with processes responsible for committing records from their
own context as required.
- Eliminate the ktrace worker thread and global record queue, as they
are no longer used. Keep the global free record list, as records
are still used.
- Add a per-process record queue, which will hold any asynchronously
generated records, such as from context switches. This replaces the
global queue as the place to submit asynchronous records to.
- When a record is committed asynchronously, simply queue it to the
process.
- When a record is committed synchronously, first drain any pending
per-process records in order to maintain ordering as best we can.
Currently ordering between competing threads is provided via a global
ktrace_sx, but a per-process flag or lock may be desirable in the
future.
- When a process returns to user space following a system call, trap,
signal delivery, etc, flush any pending records.
- When a process exits, flush any pending records.
- Assert on process tear-down that there are no pending records.
- Slightly abstract the notion of being "in ktrace", which is used to
prevent the recursive generation of records, as well as generating
traces for ktrace events.
Future work here might look at changing the set of events marked for
synchronous and asynchronous record generation, re-balancing queue
depth, timeliness of commit to disk, and so on. I.e., performing a
drain every (n) records.
MFC after: 1 month
Discussed with: jhb
Requested by: Marc Olzheim <marcolz at stack dot nl>
- several TerraTec TValue [1]
- PixelView PlayTV Pro REV-4C [2]
In case you have the PixelView card, please tell us the "pciconf -v -l"
output on multimedia@FreeBSD.org if it works. There are revisions out there
which may not work and we need to know which ones work.
PR: 53383 [1], 76002 [2]
Submitted by: Tanja Wittke <tawi@gruft.de> [1], barner [1],
Dan Angelescu <mrhsaacdoh@yahoo.com> [2]
MFC after: 2 months
This is the only file of > 1700 files in a buildkernel here doing that.
It makes reproducible builds (same source => same binary) impossible.
Spotted by: devel/ccache
is that gdb knows SIGLWP and will pass it to program, otherwise gdb
will print out "unknown signal" and discard it, and then thread
cancellation won't work for libthr under gdb.
MFC: 3 days
- Add build_iovec_argf() helper function, for help converting old
mount options which used the mount_argf() function for the mount() syscall.
Discussed with: phk
The threshold for not being tiny was too small. Use the usual 2**-12
threshold. This change is not just an optimization, since the general
code that we fell into has accuracy problems even for tiny x. Avoiding
it fixes 2*1366 args with errors of more than 1 ulp, with a maximum
error of 1.167 ulps.
The magic number 22 is log(DBL_EPSILON)/2 plus slop. This is bogus
for float precision. Use 9 (~log(FLT_EPSILON)/2 plus less slop than
for double precision). The code for handling the interval
[2**-28, 9_was_22] has accuracy problems even for [9, 22], so this
change happens to fix errors of more than 1 ulp in about 2*17000
cases. It leaves such errors in about 2*1074000 cases, with a max
error of 1.242 ulps.
The threshold for switching from returning exp(x)/2 to returning
exp(x/2)^2/2 was a little smaller than necessary. As for coshf(),
This was not quite harmless since the exp(x/2)^2/2 case is inaccurate,
and fixing it avoids accuracy problems in 2*6 cases, leaving problems
in 2*19997 cases.
Fixed naming errors in pseudo-code in comments.
