Recent discussion on the nfsv4@ietf.org mailing list confirmed
that an NFSv4 server should reply to an RPC in less than 1second.
If an NFSv4 RPC requires a delegation be recalled,
the server will attempt a CB_RECALL callback.
If the client is not responsive, the RPC reply will be delayed
until the callback times out.
Without this patch, the timeout is set to 4 seconds (set in
ticks, but used as seconds), resulting in the RPC reply taking over 4sec.
This patch redefines the constant as being in milliseconds and it
implements that for a value of 800msec, to ensure the RPC
reply is sent in less than 1second.
This patch only affects mounts from clients when delegations
are enabled on the server and the client is unresponsive to callbacks.
MFC after: 2 weeks
The Linux NFSv4.1/4.2 client now uses the CLAIM_DELEG_CUR_FH
variant of the Open operation when delegations are recalled and
the client has a local open of the file. This patch adds
support for this variant of Open to the NFSv4.1/4.2 server.
This patch only affects mounts from Linux clients when delegations
are enabled on the server.
MFC after: 2 weeks
The current implement of ip_input() reject packets destined for
169.254.0.0/16, but not those original from 169.254.0.0/16 link-local
addresses.
Fix to fully respect RFC 3927 section 2.7.
PR: 255388
Reviewed by: donner, rgrimes, karels
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29968
Once the final component of the IP address has been parsed, the offset
on the input must not be advanced, as this would remove an unparsed
character from the input.
Submitted by: Markus Stoff
Reviewed by: donner
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D26489
In order to modify libalias for performance, the existing
functionality must not change. Enforce this.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30307
We dereference so->so_cred to update the per-uid socket buffer
accounting, so the crfree() call must be deferred until after that
point.
PR: 255869
MFC after: 1 week
Since busy state is checked by all blocked writes, stopping a process
which waits in ttydisc_write() causes cascade. Utilize sigdeferstop()
to avoid the issue.
Submitted by: Jakub Piecuch <j.piecuch96@gmail.com>
PR: 255816
MFC after: 1 week
behind USB HUBs are detected and the USB reset counter logic will kick in
preventing enumeration of continuously failing ports.
Submitted by: phk@
Tested by: bz@
PR: 237666
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
says it should be max 10 milliseconds.
This may fix some USB enumeration issues:
> usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_IOERROR, ignored)
> usbd_setup_device_desc: getting device descriptor at addr 3 failed,
Found by: Zhichao1.Li@dell.com
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
0 milliseconds and 2 seconds inclusivly. Some style fixes while at it.
The USB specification has minimum values and maximum values,
and not only minimum values.
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
The AP startup extern variable declarations are not longer needed,
since PVHv2 uses the native AP startup path using the lapic. Remove
the declaration and make the variables static to mp_machdep.c
Sponsored by: Citrix Systems R&D
When a module of type "hostuuid" is provided by the loader,
prison0_init strips any trailing whitespace and ASCII control
characters by (a) adjusting the buffer length, and (b) zeroing out
the characters in question, before storing it as the system's
hostuuid.
The buffer length adjustment was correct, but the zeroing overwrote
one byte higher in memory than intended -- in the typical case,
zeroing one byte past the end of the hostuuid buffer. Due to the
layout of buffers passed by the boot loader to the kernel, this will
be the first byte of a subsequent buffer.
This was *probably* harmless; prison0_init runs after preloaded kernel
modules have been linked and after the preloaded /boot/entropy cache
has been processed, so in both cases having the first byte overwritten
will not cause problems. We cannot however rule out the possibility
that other objects which are preloaded by the loader could suffer from
having the first byte overwritten.
Since the zeroing does not in fact serve any purpose, remove it and
trim trailing whitespace and ASCII control characters by adjusting
the buffer length alone.
Fixes: c3188289 Preload hostuuid for early-boot use
Reviewed by: kevans, markj
MFC after: 3 days
If the preloaded hostuuid value is invalid and verbose booting is
enabled, a warning is printed. This printf had two bugs:
1. It was missing a trailing \n character.
2. The malformed UUID is printed with %s even though it is not known
to be NUL-terminated.
This commit adds the missing \n and uses %.*s with the (already known)
length of the preloaded UUID to ensure that we don't read past the end
of the buffer.
Reported by: kevans
Fixes: c3188289 Preload hostuuid for early-boot use
MFC after: 3 days
The dump program was exiting with the message:
Assertion failed: (spcl.c_count + blks < TP_NINDIR), function appendextdata, file /usr/src/sbin/dump/traverse.c, line 759.
The problem arose when dumping external attributes.
This assertion was added in this commit with no review by someone
with expertise in the dump program:
commit 2d518c6518
Author: Warner Losh <imp@FreeBSD.org>
AuthorDate: Mon Jun 11 19:32:36 2018 +0000
Commit: Warner Losh <imp@FreeBSD.org>
CommitDate: Mon Jun 11 19:32:36 2018 +0000
Add asserts to prevent overflows of c_addr.
It is clearly wrong as the statement immediately above it in the
code which is deciding if the data will fit is:
if (spcl.c_count + blks > TP_NINDIR)
return (0);
As is pointed out in the bug report, the assert should be:
(spcl.c_count + blks <= TP_NINDIR)
This commit corrects the assert. I am sorry that it took so long to
be brought to my attention and get fixed.
Reported by: Hampton Finger
PR: 244470
MFC after: 3 days
Sponsored by: Netflix
Currently ipfw has multiple components that are not parts
of GENERIC kernel like dummynet etc. They can bring in important
sysctls if enabled with rc.conf(5) and loaded with ipfw startup script
by means of "required_modules" after initial consult
with /etc/sysctl.conf at boot time. Here is an example of one
increasing limit for dummynet hold queues that defaults to 100:
net.inet.ip.dummynet.pipe_slot_limit=1000
This makes it possible to use ipfw/dummynet rules such as:
ipfw pipe 1 config bw 50Mbit/s queue 1000
Such rule is rejected unless above sysctl is applied.
Another example is a group of net.inet.ip.alias.* sysctls
created after libalias.ko loaded as dependency of ipfw_nat.
This is not a problem if corresponding code compiled in custom kernel
so sysctls exist when sysctl.conf is read early or kernel modules
loaded with a loader. This change makes it work also for GENERIC
and modules loaded by means of rc.conf(5) settings.
MFC after: 1 month
We never set 'busy' and never dequeue from the pending mq. Remove this
code.
Reviewed by: ae
MFC after: 1 week
Sponsored by: Rubicon Communications, LLC ("Netgate")
Differential Revision: https://reviews.freebsd.org/D30313
Test the specific case reported in PR 255852. Clearing the skip flag
on groups was broken because pfctl couldn't work out if a kif was a
group or not, because the kernel no longer set the pfik_group pointer.
PR: 255852
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30285
Userspace relies on this pointer to work out if the kif is a group or
not. It can't use it for anything else, because it's a pointer to a
kernel address. Substitute 0xfeedc0de for 'true', so that we don't leak
kernel memory addresses to userspace.
PR: 255852
Reviewed by: donner
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30284
qoriq_gpio_pin_setflags() locks the device mutex, as does
qoriq_gpio_map_gpios(), causing a recursion on non-recursive lock. This
was missed during testing for 16e549ebe.
Summary:
To make it easier to build a kernel with PowerISA 2.06 atomics (sub-word
atomics), add a kernel config option. User space still needs to specify
it as a CFLAG but that seems easier to do than for the kernel config.
Reviewed By: luporl
Differential Revision: https://reviews.freebsd.org/D29809
Summary:
There's no need to use a while loop in the IPI handler, the message list
is cached once and processed. Instead, since the existing code calls
ffs(), sort the handlers, and use a simple 'if' sequence.
Reviewed By: nwhitehorn
Differential Revision: https://reviews.freebsd.org/D30018
PVHv1 was officially removed from Xen in 4.9, so just axe the related
code from FreeBSD.
Note FreeBSD supports PVHv2, which is the replacement for PVHv1.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, Elliott Mitchell
Differential Revision: https://reviews.freebsd.org/D30228
The change to futex_andl_smap() should have ordered stac before the
load from a user address, otherwise it does not fix anything.
Fixes: fb58045145 ("linux: Fix SMAP-enabled futex routines")
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
The original filesystem release (4.2BSD) had no embedded sysmlinks.
Historically symbolic links were just a different type of file, so
the content of the symbolic link was contained in a single disk block
fragment. We observed that most symbolic links were short enough that
they could fit in the area of the inode that normally holds the block
pointers. So we created embedded symlinks where the content of the
link was held in the inode's pointer area thus avoiding the need to
seek and read a data fragment and reducing the pressure on the block
cache. At the time we had only UFS1 with 32-bit block pointers,
so the test for a fastlink was:
di_size < (NDADDR + NIADDR) * sizeof(daddr_t)
(where daddr_t would be ufs1_daddr_t today).
When embedded symlinks were added, a spare field in the superblock
with a known zero value became fs_maxsymlinklen. New filesystems
set this field to (NDADDR + NIADDR) * sizeof(daddr_t). Embedded
symlinks were assumed when di_size < fs->fs_maxsymlinklen. Thus
filesystems that preceeded this change always read from blocks
(since fs->fs_maxsymlinklen == 0) and newer ones used embedded
symlinks if they fit. Similarly symlinks created on pre-embedded
symlink filesystems always spill into blocks while newer ones will
embed if they fit.
At the same time that the embedded symbolic links were added, the
on-disk directory structure was changed splitting the former
u_int16_t d_namlen into u_int8_t d_type and u_int8_t d_namlen.
Thus fs_maxsymlinklen <= 0 (as used by the OFSFMT() macro) can
be used to distinguish old directory formats. In retrospect that
should have just been an added flag, but we did not realize we
needed to know about that change until it was already in production.
Code was split into ufs/ffs so that the log structured filesystem could
use ufs functionality while doing its own disk layout. This meant
that no ffs superblock fields could be used in the ufs code. Thus
ffs superblock fields that were needed in ufs code had to be copied
to fields in the mount structure. Since ufs_readlink needed to know
if a link was embedded, fs_maxlinklen gets copied to mnt_maxsymlinklen.
The kernel panic that arose to making this fix was triggered when a
disk error created an inode of type symlink with no allocated data
blocks but a large size. When readlink was called the uiomove was
attempted which segment faulted.
static int
ufs_readlink(ap)
struct vop_readlink_args /* {
struct vnode *a_vp;
struct uio *a_uio;
struct ucred *a_cred;
} */ *ap;
{
struct vnode *vp = ap->a_vp;
struct inode *ip = VTOI(vp);
doff_t isize;
isize = ip->i_size;
if ((isize < vp->v_mount->mnt_maxsymlinklen) ||
DIP(ip, i_blocks) == 0) { /* XXX - for old fastlink support */
return (uiomove(SHORTLINK(ip), isize, ap->a_uio));
}
return (VOP_READ(vp, ap->a_uio, 0, ap->a_cred));
}
The second part of the "if" statement that adds
DIP(ip, i_blocks) == 0) { /* XXX - for old fastlink support */
is problematic. It never appeared in BSD released by Berkeley because
as noted above mnt_maxsymlinklen is 0 for old format filesystems, so
will always fall through to the VOP_READ as it should. I had to dig
back through `git blame' to find that Rodney Grimes added it as
part of ``The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch.''
He must have brought it across from an earlier FreeBSD. Unfortunately
the source-control logs for FreeBSD up to the merger with the
AT&T-blessed 4.4BSD-Lite conversion were destroyed as part of the
agreement to let FreeBSD remain unencumbered, so I cannot pin-point
where that line got added on the FreeBSD side.
The one change needed here is that mnt_maxsymlinklen is declared as
an `int' and should be changed to be `u_int64_t'.
This discovery led us to check out the code that deletes symbolic
links. Specifically
if (vp->v_type == VLNK &&
(ip->i_size < vp->v_mount->mnt_maxsymlinklen ||
datablocks == 0)) {
if (length != 0)
panic("ffs_truncate: partial truncate of symlink");
bzero(SHORTLINK(ip), (u_int)ip->i_size);
ip->i_size = 0;
DIP_SET(ip, i_size, 0);
UFS_INODE_SET_FLAG(ip, IN_SIZEMOD | IN_CHANGE | IN_UPDATE);
if (needextclean)
goto extclean;
return (ffs_update(vp, waitforupdate));
}
Here too our broken symlink inode with no data blocks allocated
and a large size will segment fault as we are incorrectly using the
test that we have no data blocks to decide that it is an embdedded
symbolic link and attempting to bzero past the end of the inode.
The test for datablocks == 0 is unnecessary as the test for
ip->i_size < vp->v_mount->mnt_maxsymlinklen will do the right
thing in all cases.
The test for datablocks == 0 was added by David Greenman in this commit:
Author: David Greenman <dg@FreeBSD.org>
Date: Tue Aug 2 13:51:05 1994 +0000
Completed (hopefully) the kernel support for old style "fastlinks".
Notes:
svn path=/head/; revision=1821
I am guessing that he likely earlier added the incorrect test in the
ufs_readlink code.
I asked David if he had any recollection of why he made this change.
Amazingly, he still had a recollection of why he had made a one-line
change more than twenty years ago. And unsurpisingly it was because
he had been stuck between a rock and a hard place.
FreeBSD was up to 1.1.5 before the switch to the 4.4BSD-Lite code
base. Prior to that, there were three years of development in all
areas of the kernel, including the filesystem code, from the combined
set of people including Bill Jolitz, Patchkit contributors, and
FreeBSD Project members. The compatibility issue at hand was caused
by the FASTLINKS patches from Curt Mayer. In merging in the 4.4BSD-Lite
changes David had to find a way to provide compatibility with both
the changes that had been made in FreeBSD 1.1.5 and with 4.4BSD-Lite.
He felt that these changes would provide compatibility with both systems.
In his words:
``My recollection is that the 'FASTLINKS' symlinks support in
FreeBSD-1.x, as implemented by Curt Mayer, worked differently than
4.4BSD. He used a spare field in the inode to duplicately store the
length. When the 4.4BSD-Lite merge was done, the optimized symlinks
support for existing filesystems (those that were initialized in
FreeBSD-1.x) were broken due to the FFS on-disk structure of
4.4BSD-Lite differing from FreeBSD-1.x. My commit was needed to
restore the backward compatibility with FreeBSD-1.x filesystems.
I think it was the best that could be done in the somewhat urgent
circumstances of the post Berkeley-USL settlement. Also, regarding
Rod's massive commit with little explanation, some context: John
Dyson and I did the initial re-port of the 4.4BSD-Lite kernel to
the 386 platform in just 10 days. It was by far the most intense
hacking effort of my life. In addition to the porting of tons of
FreeBSD-1 code, I think we wrote more than 30,000 lines of new code
in that time to deal with the missing pieces and architectural
changes of 4.4BSD-Lite. We didn't make many notes along the way.
There was a lot of pressure to get something out to the rest of the
developer community as fast as possible, so detailed discrete commits
didn't happen - it all came as a giant wad, which is why Rod's
commit message was worded the way it was.''
Reported by: Chuck Silvers
Tested by: Chuck Silvers
History by: David Greenman Lawrence
MFC after: 1 week
Sponsored by: Netflix
Commit 7a606f280a allowed the server to do retries of CB_RECALL
callbacks every couple of seconds. This was needed to allow the
Linux client to re-establish the back channel.
However this patch broke the delegation timeout check, such that
it would just keep retrying CB_RECALLS.
If the client has crashed or been network patitioned from the
server, this continues until the client TCP reconnects to
the server and re-establishes the back channel.
This patch modifies the code such that it still times out the
delegation recall after some minutes, so that the server will
allow the conflicting client request once the delegation times out.
This patch only affects the NFSv4 server when delegations are
enabled and a NFSv4 client that holds a delegation has crashed
or been network partitioned from the server for at least several
minutes when a delegation needs to be recalled.
MFC after: 2 weeks
It looks like I've missed a couple of places where we don't clear
stack-allocated CCBs. Don't panic when that happens, just print
a warning.
This is a temporary measure until I get those cases fixed.
Reviewed By: markj
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D30296
Some of them were dereferencing the user pointer before disabling SMAP.
PR: 255591
Reviewed by: kib
Tested by: pitwuu@gmail.com
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30276
m_pullup(9) frees the mbuf(9) chain in the case of an allocation error.
The mbuf chain must not be freed again in this case.
PR: 255874
Submitted by: <lylgood@foxmail.com>
Approved by: markj
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30273
Previously, daregister() could have been called before dainit()
initialized the UMA zone. This would trip a KASSERT.
Reported By: pho
Tested By: pho
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
The gfx_fb_drawrect() is drawing rectangle by pixels, this can be very
slow on some systems. Use Blt() video fill primitive instead.
Testing done: Tested on mac mini 2012 where the issue was revealed
Reviewed by: yuripv
MFC after: 1 week
Replace it with a tutorial hosted on kerberos.org and the classic
"dialogue" from Bill Bryant. The change has been reported and
merged upstream (https://github.com/heimdal/heimdal/commit/7f3445f1b7).
MFC after: 3 days
PR: 251854
Reported by: ktullavik@gmail.com
Submitted by: bjk (upstream github)
Reviewed by: bcr
At some places the ASSERT was inserted before variable declarations are
finished. This is fixed now.
Reported by: kib
Reviewed by: kib
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D30282
This patch makes it possible for CAM to use small CCBs allocated
from an periph-specific UMA zone instead of the usual, huge ones.
The end result is that CCBs issued via da(4) take 544B (size of
ccb_scsiio) instead of the usual 2kB (size of 'union ccb', ~1.5kB,
rounded up by malloc(9)). For ATA it's 272B. We waste less
memory, we avoid zeroing the unused 1kB, and it should be easier
to allocate those CCBs in low memory conditions. It should also
be possible to use uma_zone_reserve(9) to improve behaviour
in low memory conditions even further.
Note that this does not change the size, or the layout, of CCBs
as such. CCBs get allocated in various different ways, in particular
on the stack, and I don't want to redo all that. Instead, this
provides an opt-in mechanism for the periph to declare "my start()
callback is fine with receiving a CCB allocated from this UMA zone".
In other words, most of the code works exactly as it used to; the
change only happens to IOs issued by xpt_run_allockq(), which
is - conveniently - pretty much all that matters for performance.
The reason for doing it this way is that it's pretty small, localized
change, and can be implemented gradually and iteratively: take a
periph, make sure its start() callback only casts the CCBs it takes
to a particular type of CCB, for example ccb_scsiio, and that it only
casts CCBs returned by cam_periph_getccb() to that type, then add UMA
zone for that size, and declare it safe to XPT.
This is disabled by default. Set 'kern.cam.ada.enable_uma_ccbs=1'
and 'kern.cam.da.enable_uma_ccbs=1' tunables to enable it. Testing
is welcome; I will flip the default to enable in two weeks from now.
Reviewed By: imp
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D28674
The field nullAddress in struct libalias is never set and never used.
It exists as a placeholder for an unused argument only.
Reviewed by: hselasky
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D30253
