(which somehow now seems to be the default for compiling -current).
This error popped up while doing a PicoBSD cross-compile on a 4.3-ish system,
it may well be that there are other apps which have similar problems,
but I did not spot them as they are not included in my picobsd config.
Whether adding prototypes for main() is the correct solution or not
I have no idea, a request to -current on the matter went basically
unanswered. Those who have better ideas are welcome to back this out
and replace it with the correct fix.
of the recent WARNS commits. The idea is:
1) FreeBSD id tags should follow vendor tags.
2) Vendor tags should not be compiled (though copyrights probably should).
3) There should be no blank line between including cdefs and __FBSDIF.
o explicitly check return values and variables against a value
o return x; -> return (x);
o fix inconsistent sysexits usage by nuking it (partially
suggested by bde)
Obtained from: TrustedBSD Project
group ACL entry in relation to the existing group and mask
ACL entries.
o Move the explanation of multiple ACL entries on the command
line to the ACL ENTRIES section.
Obtained from: TrustedBSD Project
used so often that it's worth keeping it as a builtin.
Now that all the printf invocations from within the system startup
scripts, we can safely remove it.
Urged by: sheldonh :)
No MFC is planned so far because it may break compatibility and
violate POLA.
binary size increase is 3,784 bytes (about 0.6%).
I don't drop the printf builtin while I'm here because some /etc/rc.*
scripts seem to use it before mounting /usr where printf(1) resides.
Reviewed by: arch (sheldonh)
Inspired by: NetBSD, ksh
Clued by: ume (on how the printf builtin is used)
setvar() and passed to setvareq(). When the VTEXTFIXED flag is set,
that copy is never freed, causing a memory leak.
PR: 31533
Submitted by: maxim@macomnet.ru
characters. Use quad conversion functions rather then long conversion
where appropriate to handle the available range. Mainly fixes time_t
but there was also a st_size ulong conversion in there that has to be
quad or cpio cannot be used to copy files > 2G.
MFC after: 1 day
Restore the code that avoided closing and reopening
stdin. This is also required by POSIX. As a bonus,
enable multiple stdin reads with the -benstv flags,
by resetting the EOF condition on stdin.
value CTLARI since this might break expansion of arithmetic expressions.
Don't access memory below start of stackblock.
Problem analyzed by hunt@iprg.nokia.com, slightly different patch applied.
PR: 24443
Submitted by: hunt@iprg.nokia.com
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.
Sorry john! (your next MFC will be a doosie!)
Reviewed by: peter@freebsd.org, dillon@freebsd.org
X-MFC after: ha ha ha ha
This file could be removed as the alpha changes have been incorporated into
the base release. However, it is probably best to leave this here since there
are additional FreeBSD architectures in the pipeline that should be added.
fseek -> fseeko
ftell -> ftello
NOTE: that fseek/ftell not works for >long offsets per POSIX:
[EOVERFLOW] For fseek( ), the resulting file offset would be a value which
cannot be represented correctly in an object of type long.
[EOVERFLOW] For ftell ( ), the current file offset cannot be represented
correctly in an object of type long.
Avoid using parenthesis enclosure macros (.Pq and .Po/.Pc) with plain text.
Not only this slows down the mdoc(7) processing significantly, but it also
has an undesired (in this case) effect of disabling hyphenation within the
entire enclosed block.
o Add consts where appropriate.
o Rename some variables that were shadowing global declarations.
o Remove register storage-classes.
o Make errmsg a const, so we can just set error messages instead
of using sprintf/strcpy.
o Set WARNS=2
Reviewed by: bde, des
which is also called from handle_hup(), uses stdio(3). Furthermore,
this means that calling exit(3) (via quit()) there is required to
flush the buffer write_file() was working on.
Submitted by: bde
signal. Fix it by adding an explicit call to summary() in terminate()
(it was previously called implicitly by exit() because summary() was
registered with atexit()). summary() is supposed to be signal-safe--
it handles SIGINFO almost exclusively--so this should be safe.
Submitted by: bde
the !(pflag && setfile()) case for regular files unless the copy is
owned by the same user and group. These bits have already been lost
(or never gained) in the correct way. The code didn't actually lose
the bits; it depended on them being lost already (apparently in all
cases) and attempted to gain them as necessary, but it often gained
them (and sometimes collateral bits) when wrong:
- pflag && setfile() == 0 case (i.e., for a successful cp -p):
setfile() copies all the attributes as correctly as possible (as
specified by POSIX), and we sometimes messed up the up the mode by
setting it again. Also, if the file is immutable, then setting the
mode again gave spurious errors (PR 20646).
- !pflag case. If the target is created, POSIX requires it to not
have the set[ug]id bits, but we sometimes copied them from the source.
If the target already exists, POSIX requires its mode to be unchanged,
but we sometimes copied the whole mode from the source.
PR: 20646
MFC after: 4 weeks
errexit (-e) processing. This solves a problem where 'make clean' would
fail with an unspecified error in certain automake-generated makefiles.
Reviewed by: no objections from -hackers...
MFC after: 2 weeks
``chown -h owner symlink'' did not set the symlink's owner
if the file the symlink points to already had that owner:
# ls -l alink afile
-rw-r--r-- 1 nobody ru 0 May 31 14:14 afile
lrwxr-xr-x 1 root ru 5 May 31 14:14 alink -> afile
# ./chown -h -v nobody alink
# ls -l alink afile
-rw-r--r-- 1 nobody ru 0 May 31 14:14 afile
lrwxr-xr-x 1 root ru 5 May 31 14:14 alink -> afile
Similarly for chgrp(1) and chmod(1).
in okname() in util.c and second, returning != 0 when you do have an
error from okname in two places in rcp.c.
Thanks to Garrett for the POSIX defintion of valid login and group names.
PR: bin/25757
MFC after: 3 weeks
error caused by the -1 being on the wrong side of the comparison.
This would not cause an overflow, as near as I can tell, because we
truncate later anyway. We'd just fail to get a diagnostic for 1024
and 1025 byte file names.
This is required by symlink(7), ``Commands not traversing a file tree''
subsection, third paragraph:
: It is important to realize that this rule includes commands which may
: optionally traverse file trees, e.g. the command ``chown file'' is
: included in this rule, while the command ``chown -R file'' is not.
For chown(8) and chgrp(1), this is also is compliance with the latest
POSIX 1003.1-200x draft.
MFC after: 1 week
and remove the setgid operator bit from the installed binary: if you want
to view free disk space on an unmounted device, you should have read
permissions to access it.
Reviewed by: phk
are:
* Implement cpio compatibility mode when pax is invoked as cpio
* Extend tar compatibility mode to cover many of the GNU tar single-letter
options (bzip2 mode, aka -y/-j is not present in OpenBSD). When
invoked as tar, pax is now full-featured enough for use by the ports
collection to extract distfiles and create packages.
* Many bug fixes to the operation of pax and the tar compatibility modes
* Code fixes for things like correct string buffer termination.
I tried to preserve existing FreeBSD fixes to this utility; please let me
know if I have inadvertently spammed something.
and compress) to pax when used in tar mode (invoked as 'tar') for
compatibility with GNU tar.
bzip2 functionality for further GNU tar compatibility will be added at a
later date.
Note in the manpage that -z is non-standard.
Obtained from: OpenBSD
Reviewed by: -hackers
MFC after: 2 weeks
required by POSIX.1e. This maintains the current 'struct acl'
in the kernel while providing the generic external acl_t
interface required to complete the ACL editing library.
o Add the acl_get_entry() function.
o Convert the existing ACL utilities, getfacl and setfacl, to
fully make use of the ACL editing library.
Obtained from: TrustedBSD Project
now compile/work on any POSIX.1e-compliant implementation (also tested
against the current Linux patches).
Review by: rwatson
Obtained from: TrustedBSD Project
: LC_TIME This variable shall determine the format and
: contents of date and time strings when the -v
: option is specified.
Developers took this wrong. LC_TIME specifies the locale
name, not the ``format'' argument of strftime().
Oops:
pax -w -f /tmp/foo /dev/null
LC_TIME=de_DE.ISO_8859-1 pax -v -f /tmp/foo
When a child is receiving SIGSTOP, eval continues with the next
command. While that is correct for the interactive case (Control-Z
and you get the prompt back), it is wrong for a shellscript, which
just continues with the next command, never again waiting for the
stopped child. Noted when childs from cronjobs were stopped, just to
make more processes (by wosch).
The fix is not to return from a job wait when the wait returned for a
stopped child while in non-interactive mode. This bahaviour seems to
be what bash2 and ksh implement. I tested for correct behaviour for
finnaly killing the child with and without forgrounding it first.
When not foregrouding before killing, the shell continues with the
script, which is what the other shells do as well.
Reviewed by: Silence on -current
This makes "mkdir /nonexistant/foo" complain that /nonexistant
doesn't exist rather than /nonexistant/foo which doesn't make much
sense.
Submitted (in a different form) by: W.H.Scholten <whs@xs4all.nl>
no longer contains kernel specific data structures, but rather
only scalar values and structures that are already part of the
kernel/user interface, specifically rusage and rtprio. It no
longer contains proc, session, pcred, ucred, procsig, vmspace,
pstats, mtx, sigiolst, klist, callout, pasleep, or mdproc. If
any of these changed in size, ps, w, fstat, gcore, systat, and
top would all stop working. The new structure has over 200 bytes
of unassigned space for future values to be added, yet is nearly
100 bytes smaller per entry than the structure that it replaced.
This lets you resolve pathnames to their underlying physical path:
critter# realpath /sys/kern/subr_disk.c
/freebsd/src/sys/kern/subr_disk.c
Update the pwd man-page slightly.
