in #ifdef __NO_STRICT_ALIGNMENT rather than #if defined(__i386__) ||
defined(__amd64__). Currently this change is cosmetic only though.
While at it, fix a nearby style(9) bug and remove a no longer used
header.
are no longer limited to a virtual address space of 16 megabytes,
only mask high two bits of a virtual address. This allows to load
larger kernels (up to 1 gigabyte). Not masking addresses at all
was a bad idea on machines with less than >3G of memory -- kernels
are linked at 0xc0xxxxxx, and that would attempt to load a kernel
at above 3G. By masking only two highest bits we stay within the
safe limits while still allowing to boot larger kernels.
(This is a safer reimplmentation of sys/boot/i386/boot2/boot.2.c
rev. 1.71.)
Prodded by: jhb
Tested by: nyan (pc98)
dynamic nature (if no native aio code is available, the linux part
returns ENOSYS because of missing requisites) should be solved differently
than it is.
All this will be done in P4.
Not included in this commit is a backout of the changes to the native aio
code (removing static in some places). Those changes (and some more) will
also be needed when the reworked linux aio stuff will reenter the tree.
Requested by: rwatson
Discussed with: rwatson
- Pay respect to net.isr.direct: use netisr_dispatch() instead of ip_input()
Reviewed by: glebius, rwatson
- purge_flow_set():
- Do not leak memory while purging queues which are not bound to pipe.
- style(9) cleanup
MFC after: 2 months
not completely decided at config time. Just don't default to using
the TSC if there are multiple active CPUs. Also, don't default to
using the TSC if it is broken. SMP ifdefs are still used to disallow
using perfmon since perfmon is always broken if SMP is just configured.
This only helps much for SMP kernels running on 1 CPU. The overheads
for using the i8254 cputime clock were a bit too high on 486/33's, and
now on multi-GHz CPUs they are usually in the 99-99.9% range. Switching
from the old default of an i8254 clock to the TSC works poorly because
the overheads are not recalibrated.
Use the same condition for declaring perfmon stuff as for using it.
Call vfs_setdirty_locked_object() from vfs_busy_pages() instead of
vfs_setdirty(), thereby eliminating a second acquisition and release
of the same vm object lock.
Factor out the loopback setup
Use "me" instead of hardcoded $ip where possible.
Add "workstation" which protects just this machine with stateful
firewalling. Put the variables for this in rc.conf.
Submitted by: Flemming Jacobsen <fj@batmule.dk>
Reviewed by: cperciva
queues lock to BIO_READ operations. Recent changes to the implementation
of the per-page flags have eliminated the need for the page queues lock
in the other cases.
- Don't use a frame pointer. Our callers need a frame pointer, but we
could only use one to support things that aren't supported. (These
things are:
- profiling of profiling
- debugging of profiling. The core ENTRY() macro doesn't support
forcing a frame pointer for debugging, so don't do more here.)
- Ensure that we are in the text section and have normal alignment.
- Use the normal syntax for `.type'.
Fixed a syntax error for the (!__KERNEL && !__GNUCLIKE_ASM) case in
rev.1.36. Apparently, this case has never been reached even by lint.
Submitted by: stefanf
{amd64,i386}/include/profile.h:
In case the above case is actually reached, break it properly by
providing null support that will fail at link time instead of a stub
that gives wrong (null) profiling at runtime.
Rename MAX_SAMPLE_RATES macro to OSS_MAX_SAMPLE_RATES. The old
macro clashed with those used in other applications and libaries
(ex: RtAudio). 4Front responded by updating their spec, so we
will follow suit.
Submitted by: ryanb
Noticed by: pointyhat/kris
was only used in the GUPROF case, so the messes to get its i386 prerequisites
included shouldn't have been needed.
Fixed some style bugs. Quote #error contents, and don't repeat an #error
directive on amd64.
this used to be slightly cleaner than using ifdefs in a few places to
support both a.out and elf, but using it now just causes messes and
unportabilities. It seems to be impossible to implement the elf
HIDENAME() portably in cpp (since token pasting of "." and <name> is
invalid).
*/prof_machdep.c:
- Removed all uses of CNAME(). CNAME() is easy enough to use in pure
asm code, but using it in inline asm requires messy quoting. The
core pure asm code has been hacked on more and all uses of CNAME() in
it have already gone away. Just assume the elf convention here too.
- Removed now-uneeded include of <machine/asmacros.h>.
- Removed the workaround for a namespace conflict with this include.
new device support, and it is hoped a more stable driver for 6.2. RELEASE.
This checkin was discussed and approved today by RE, scottl, jhb, and pdeuskar
profiling is configured but high resolution profiling is not configured.
Only functions in *.[Ss] called the stub, so efficiency was not
significantly affected.
net.inet.ip.dummynet.curr_time
net.inet.ip.dummynet.searches
net.inet.ip.dummynet.search_steps
to SYSCTL_LONG nodes. It will prevent frequent wrap around on 64bit archs.
- Implement simple mechanics for dummynet(4) internal time correction.
Under certain circumstances (system high load, dummynet lock contention, etc)
dummynet's tick counter can be significantly slower than it should be.
(I've observed up to 25% difference on one of my production servers).
Since this counter used for packet scheduling, it's accuracy is vital for
precise bandwidth limitation.
Introduce new sysctl nodes:
net.inet.ip.dummynet.
tick_lost - number of ticks coalesced by taskqueue thread.
tick_adjustment - number of time corrections done.
tick_diff - adjusted vs non-adjusted tick counter difference
tick_delta - last vs 'standard' tick differnece (usec).
tick_delta_sum - accumulated (and not corrected yet) time
difference (usec).
Reviewed by: glebius
MFC after: 2 month
The 'nooption' kernel config entry has to be used to turn KSE off now.
This isn't my preferred way of dealing with this, but I'll defer to
scottl's experience with the io/mem kernel option change and the grief
experienced over that.
Submitted by: scottl@
except sun4v.
This change makes the transition from a default to an option more
transparent and is an attempt to head off all the compliants that are
likely from people who don't read UPDATING, based on experience with
the io/mem change.
Submitted by: scottl@
i386). Use -mprofiler-epilogue again, and don't use -finstrument-functions.
The former has been fixed for arches that implement high-res profiling,
and the latter has been useless for kernel profiling since gcc-3.4
when it started forcing -fno-inline. -fno-inline gives a kernel with
performance characteristics too different from a normal kernel to be
worth profiling, by turning off inlining of all the little optimized
functions in headers. This interacts especially badly with FreeBSD's
use of "static inline" for all inlines in headers, by creating many
separate copies of the little functions, so not inlining tends to
increase cache pressure where it should reduce it, and (since gprof(1)
doesn't understand the copies) the statistics for the little functions
are hard to interpret even if you want them.
to twice unlock the vnode. Check that ni_vp and ni_dvp are different before
doing second unlock.
Reviewed by: rwatson
Approved by: pjd (mentor)
MFC after: 1 week
counters of allocs/frees/use for each malloc type to calculating InUse,
MemUse, and Requests as displayed by the userspace vmstat -m. This is
more useful when debugging malloc(9)-related memory leaks, where the
count of allocs/frees may not usefully reflect that current memory
allocation (i.e., when highly variable size allocations occur with the
same malloc type, such as with contigmalloc).
MFC after: 3 days
Limitations observed by: scottl
