There is no guarantee that after close(2)/free the errno will remain
persistent. The caller of the udom_open function depends on the errno
for reporting errors.
Reviewed by: markj
Differential Revision: https://reviews.freebsd.org/D28185
AMD 10GbE hardware is designed to have two buffers per receive descriptor to
support split header feature. For this purpose, the driver was designed to use
2 iflib freelists per receive queue. So, that buffers from 2 freelists are used
to refill an entry in the receive descriptor. The current design holds good
with regular data traffic.
But, when netmap comes into play, the current design will not fit in. The
current netmap interfaces and netmap implementation in iflib doesn't seem
to accomodate the design of 2 freelists per receive queue. So, exercising
Netmap capability with inbuilt tools like bridge, pkt-gen doesn't work with
the 2 freelists driver design.
So, the driver design is changed to accomodate the current netmap interfaces
and netmap implementation in iflib by using single freelist per receive queue
approach when Netmap capability is exercised without disturbing the current
2 freelists approach.
The dev.ax.sph_enable tunable can be set to 0 to configure the single
free list mode.
Thanks to Stephan Dewt for his Initial set of code changes for the stated
problem.
Submitted by: rajesh1.kumar_amd.com
Approved by: vmaffione
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D27797
This rode in with the OpenZFS import. It may have been necessary at some
point, but it is no longer and it breaks the WITHOUT_DYNAMICROOT build as
it collides with the definition in libspl.
Reported-by: Michael Dexter
-R is currently shorthand for cachefile=none, altroot=<mount>. This is
functionally the same, but perhaps more resilient to future changes that
could be necessary that may be added when -R is specified.
MFC after: 1 week
disk failure.
Each vnode has an embedded lock that controls access to its contents.
However vnodes describing a UFS snapshot all share a single snapshot
lock to coordinate their access and update. As part of mounting a
UFS filesystem with snapshots, each of the vnodes describing a
snapshot has its individual lock replaced with the snapshot lock.
When the filesystem is unmounted the vnode's original lock is
returned replacing the snapshot lock.
When a disk fails while the UFS filesystem it contains is still
mounted (for example when a thumb drive is removed) UFS forcibly
unmounts the filesystem. The loss of the drive causes the GEOM
subsystem to orphan the provider, but the consumer remains until
the filesystem has finished with the unmount. Information describing
the snapshot locks was being prematurely cleared during the orphaning
causing the return of the snapshot vnode's original locks to fail.
The fix is to not clear the needed information prematurely.
Sponsored by: Netflix
with snapshots.
Each vnode has an embedded lock that controls access to its contents.
However vnodes describing a UFS snapshot all share a single snapshot
lock to coordinate their access and update. As part of mounting a
UFS filesystem with snapshots, each of the vnodes describing a
snapshot has its individual lock replaced with the snapshot lock.
When the filesystem is unmounted the vnode's original lock is
returned replacing the snapshot lock.
The lock order reversal happens because vnode locks must be acquired
before snapshot locks. When unmounting we must lock both the snapshot
lock and the vnode lock before swapping them so that the vnode will
be continuously locked during the swap. For each vnode representing
a snapshot, we must first acquire the snapshot lock to ensure
exclusive access to it and its original lock. We then face a lock
order reversal when we try to acquire the original vnode lock. The
problem is eliminated by doing a non-blocking exclusive lock on the
original lock which will always succeed since there are no users
of that lock.
Sponsored by: Netflix
This fixes the positioning of the "Welcome to FreeBSD" heading, which was
misplaced after the recent update to Lua 5.4. The issue was previously
masked by a compatibility knob in Lua 5.3 that would cause float-tagged
numbers to render faithfully without the decimal component. Lua 5.4 dropped
that and ensures that it always prints a decimal component, even if it has
to append a ".0" to the value.
Standard division produces a "float", floor division (//) can be used to
guarantee an integer. Floating point operations have been completely ripped
out of the liblua compiled for the bootloader, so this is a nop. This is
decidedly better than trying to hack out the float tag entirely.
Reported-by: mjg, probably others
MFC-after: 3 days
depend on FILESYSTEMS run mktemp(1). For systems that have read-only
root this is broken until memory disk based /tmp is instantiated. At
least 'os-release' and 'motd' are subject to this problem.
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D28097
remote filesystems. Discussed this with Brooks and he can't find
evidence that provoked the change in 2005. If anything gets broken
I will fix it in a different way, not via rc sequence change.
Discussed with: brooks
Reviewed by: ngie
Differential Revision: https://reviews.freebsd.org/D28097
This allows us to use it when we only need to check if the virtual address
is valid. For example when checking if an address in the DMAP region is
mapped.
Reviewed by: kib, markj
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D27621
The old vendor tree was never fully merged and doing partial merge isn't
supported with git subtree merge so a new one was created.
Switch the build to use the new DTS from sys/contrib/device-tree
This also bump the DTS used to be in sync with Linux 5.9
While here change the way to get the linux version, simply hardcode
the value in sys/dts/freebsd-compatible.dts and use awk to get that
to put it in the CFLAGS.
As a bonus we now have the bindings docs available
in sys/contrib/device-tree/Bindings/ so no need to link to the Linux repo
or to the vendor tree.
It changed the #pinctrl-cells value to be equal to 2 and the macro
that generates the values.
Based on the bindings docs a value of 2 is only acceptable if the node
used pinctrl-single,bits and not pinctrl-single,pins
This allow booting further on the beaglebone black with 5.9 DTS
A more complete fix for this function is being worked on in D28054. Fix
the uninitialized variable error so that builds can at least proceed.
Reported by: several
Stop running ctfconvert over generated C files in the kernel by marking
them with no-ctfconvert.
This fixes warnings from ctfconvert trying to parse C files:
ctfconvert: file.c: Couldn't read ehdr: Invalid argument
Reviewed by: emaste, mmel
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28156
Caller is not interested in symlinks follow them.
Throw an error if too many links encountered.
Reviewed by: stevek
Sponsored by: Juniper Networks
--This line, and those below, will be ignored--
> Description of fields to fill in above: 76 columns --|
> PR: If a GNATS PR is affected by the change.
> Differential Revision: https://reviews.freebsd.org/D### (*full* phabric URL needed).
> Submitted by: If someone else sent in the change.
> Reviewed by: If someone else reviewed your modification.
> Approved by: If you needed approval for this commit.
> Obtained from: If the change is from a third party.
> MFC after: N [day[s]|week[s]|month[s]]. Request a reminder email.
> MFH: Ports tree branch name. Request approval for merge.
> Relnotes: Set to 'yes' for mention in release notes.
> Security: Vulnerability reference (one per line) or description.
> Sponsored by: If the change was sponsored by an organization.
> Empty fields above will be automatically removed.
Change-Id: I4ef92ff256f503c620dc5bba79ed93b32cb2330d
Print warning when we can't parse a console specification (this may
not appear on the console, but will appear in dmesg).
Also, accept key:value and key=value. There's no reason not to
and it makes this more forgiving of mistakes.
Reviewed by: rpokala@
Differential Revision: https://reviews.freebsd.org/D28168
Some ELF feature flags indicate a request to opt-out of some feature,
for example NT_FREEBSD_FCTL_ASLR_DISABLE indicates that ASLR should be
disabled for the tagged binary. Using "aslr" as the short name for the
flag is confusing as it seems to indicate a request for ASLR to be
enabled. Rename "noaslr", and make a similar change for other opt-out
flags.
Reviewed by: bapt, manu, markj
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28139
I am going to prefix opt-out ELF feature flag names with "no" to make
their meaning more clear (review D28139), but there are some uses of the
existing names already (e.g., the PR referenced below).
For now accept the older, unprefixed name as well, and emit a warning.
We can revert this after FreeBSD 13 branches.
% elfctl -e +aslr foo
elfctl: interpreting aslr as noaslr; please specify noaslr
PR: 239873 (related)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D28140
usbhid(4) is disabled by default to avoid conflicts with existing USB HID
drivers. To enable it place following lines to /boot/loader.conf:
hw.usb.usbhid.enable=1
usbhid_load="YES"
Suggested by: jhb
Reviewed by: hselasky
Differential revision: https://reviews.freebsd.org/D28124
When timestamp support has been negotiated, TCP segements received
without a timestamp should be discarded. However, there are broken
TCP implementations (for example, stacks used by Omniswitch 63xx and
64xx models), which send TCP segments without timestamps although
they negotiated timestamp support.
This patch adds a sysctl variable which tolerates such TCP segments
and allows to interoperate with broken stacks.
Reviewed by: jtl@, rscheff@
Differential Revision: https://reviews.freebsd.org/D28142
Sponsored by: Netflix, Inc.
PR: 252449
MFC after: 1 week
This is the superset of the nooptions found in the -DEBUG kernels.
Reviewed by: emaste, manu
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D28152
This is a no-op for now since libifconfig is only built as a static lib.
Reviewed by: freqlabs, kp, adrian
Differential Revision: https://reviews.freebsd.org/D28119
