instead of pause() in the msleep() function to avoid rounding errors when
converting delay values forth and back. Add a guard for a delay value
of zero milliseconds which is undefined.
MFC after: 1 week
Requested by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
It would have been on an actual named pass before, but none were really
appropriate in name. Move it to the recently created SUPPORTDEV pass, which
perfectly describes it and keeps it in the right order.
Getting regulator is good, enabling them is better.
When the mmc stack decide to change the voltage for IO, don't
change the main vcc of the sd/mmc, only the io vcc.
AXP803 and AXP813/818 are very similar, only two regulators differs.
AXP803 is the companion chip for A64/R18
AXP813 is the companion chip for A83T
AXP818 is the companion chip for H8 (~A83T)
Add support for all regulators found in both of them.
Since that change the system call stack traces look like this:
...
sys___sysctl() at sys___sysctl+0x5f/frame 0xfffffe0028e13ac0
amd64_syscall() at amd64_syscall+0x79b/frame 0xfffffe0028e13bf0
fast_syscall_common() at fast_syscall_common+0x101/frame 0xfffffe0028e13bf0
So, db_nextframe() stopped recognizing the system call frame.
This commit should fix that.
Reviewed by: kib
MFC after: 4 days
The reason for this new pass is :
The earlier pass names are really specific (interrupt, timer, scheduler etc ..)
and making a driver that other device driver (that attach at DEFAULT pass)
needs probe at earlier pass can be confiusing. We can live with GPIO driver
at INTERRUPT pass because they are often an interrupt controller too but having
a usb phy driver probed at RESOURCES (or SCHEDULER for example) is silly.
The number was choosen to have a lot of margin if we want to introduce other
pass in the futur.
Reviewed by: ian, imp, kevans
Differential Revision: https://reviews.freebsd.org/D14568
imcsmb(4) provides smbus(4) support for the SMBus controller functionality
in the integrated Memory Controllers (iMCs) embedded in Intel Sandybridge-
Xeon, Ivybridge-Xeon, Haswell-Xeon, and Broadwell-Xeon CPUs. Each CPU
implements one or more iMCs, depending on the number of cores; each iMC
implements two SMBus controllers (iMC-SMBs).
*** IMPORTANT NOTE ***
Because motherboard firmware or the BMC might try to use the iMC-SMBs for
monitoring DIMM temperatures and/or managing an NVDIMM, the driver might
need to temporarily disable those functions, or take a hardware interlock,
before using the iMC-SMBs. Details on how to do this may vary from board to
board, and the procedure may be proprietary. It is strongly suggested that
anyone wishing to use this driver contact their motherboard vendor, and
modify the driver as described in the manual page and in the driver itself.
(For what it's worth, the driver as-is has been tested on various SuperMicro
motherboards.)
Reviewed by: avg, jhb
MFC after: 1 week
Relnotes: yes
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D14447
Discussed with: avg, ian, jhb
Tested by: allanjude (previous version), Panasas
POSIX explicitly states that the application must declare union semun.
This makes no sense, but it is what it is. This brings us into line
with Linux, MacOS/Darwin, and NetBSD.
In a ports exp-run a moderate number of ports fail due to a lack of
approprate autotools-like discovery mechanisms or local patches. A
commit to address them will follow shortly.
PR: 224300, 224443 (exp-run)
Reviewed by: emaste, jhb, kib
Exp-run by: antoine
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D14492
This deliberately breaks the API in preperation for future syscall
revisions which will remove these nonstandard members.
In an exp-run a single port (devel/qemu-user-static) was found to
use them which it did becuase it emulates system calls. This has
been fixed in the ports tree.
PR: 224443 (exp-run)
Reviewed by: kib, jhb (previous version)
Exp-run by: antoine
Sponsored by: DARPA, AFRP
Differential Revision: https://reviews.freebsd.org/D14490
copyout(9) family.
The addresses are user-controllable, and if the process ABI allows
mapping at zero, then the zero address is meaningful, contradicting
the definition of _Nonnull. In any case, it does not require any
special code to handle NULL udaddr.
It is not clear if __restrict makes sense as well, since kaddr and
udaddr point to different address spaces, so equal numeric values of
the pointers do not imply aliasing and a legitimate. But leave it for
later.
copyinstr(9) does not have its user address argument annotated.
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
delayed_work in the LinuxKPI. This allows the timer_pending() function
macro to be used with delayed work structures.
No functional nor structural change.
MFC after: 1 week
Submitted by: Johannes Lundberg <johalun0@gmail.com>
Sponsored by: Mellanox Technologies
Sponsored by: Limelight Networks
to fix the memory leak that I introduced in r328426. Instead of
trying to clear up the possible memory leak in all the clients, I
ensure that it gets cleaned up in the source (e.g., ffs_sbget ensures
that memory is always freed if it returns an error).
The original change in r328426 was a bit sparse in its description.
So I am expanding on its description here (thanks cem@ and rgrimes@
for your encouragement for my longer commit messages).
In preparation for adding check hashing to superblocks, r328426 is
a refactoring of the code to get the reading/writing of the superblock
into one place. Unlike the cylinder group reading/writing which
ends up in two places (ffs_getcg/ffs_geom_strategy in the kernel
and cgget/cgput in libufs), I have the core superblock functions
just in the kernel (ffs_sbfetch/ffs_sbput in ffs_subr.c which is
already imported into utilities like fsck_ffs as well as libufs to
implement sbget/sbput). The ffs_sbfetch and ffs_sbput functions
take a function pointer to do the actual I/O for which there are
four variants:
ffs_use_bread / ffs_use_bwrite for the in-kernel filesystem
g_use_g_read_data / g_use_g_write_data for kernel geom clients
ufs_use_sa_read for the standalone code (stand/libsa/ufs.c
but not stand/libsa/ufsread.c which is size constrained)
use_pread / use_pwrite for libufs
Uses of these interfaces are in the UFS filesystem, geoms journal &
label, libsa changes, and libufs. They also permeate out into the
filesystem utilities fsck_ffs, newfs, growfs, clri, dump, quotacheck,
fsirand, fstyp, and quot. Some of these utilities should probably be
converted to directly use libufs (like dumpfs was for example), but
there does not seem to be much win in doing so.
Tested by: Peter Holm (pho@)
Add I2C OPAL driver and a set of dummy-ones to allow
all I2C things on Power8 to attach.
TODO: better async token management
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: IBM, QCM Technologies
Many licenses on Linuxolator files contained small variations from the
standard FreeBSD license text. To avoid license proliferation switch to
the standard 2-clause FreeBSD license for those files where I have
permission from each of the listed copyright holders. Additional files
still waiting on permission from others are listed in review D14210.
Approved by: dchagin, rdivacky, sos
MFC after: 1 week
MFC with: r329370
Sponsored by: The FreeBSD Foundation
LinuxKPI to comply more with Linux. This fixes an issue when these functions
are used in waiting loops.
MFC after: 1 week
Sponsored by: Mellanox Technologies
In the weird case where the user-provided buffer was zero bytes, we could break
out of PCIOCGETCONF and return without initializing error. In this case,
initialize error to zero -- we successfully did nothing, as requested.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
'status' array passed to get_mouse_status() is usually uninitialized by
callers.
Fully populating it with values in get_mouse_status() can fail due to
read_aux_data().
Additionally, nothing in API constrains 'len' to be >= 3. In practice,
every caller passes three, so perhaps that argument should just be removed.
Refactoring is a larger change, though.
Remove use of potentially uninitialized values by:
1. Only printing 3 debug statuses if the passed array was at least
'len' >= 3;
2. Populating 'status' array up to first three elements, if read_aux_data()
failed.
No functional change intended.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
Coverity cannot determine that handle_written_indirdep() does not access
uninitialized 'sbp' when flags argument is zero.
So, simply move the initialization slightly sooner to silence the warning.
No functional change.
Reported by: Coverity
Sponsored by: Dell EMC Isilon
6.0 spec 6.4.3.5 bit 0 is ignored on QWord, DWord, and Word Address Space
Descriptors, but not Extended Address Space Descriptors.
Reviewed by: jhb
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D14516
It calls OF_* functions to check if it needs to implement workarounds.
This may not be the case on arm64 where we support both FDT and ACPI.
Fix this by checking if we are booting on FDT before calling these checks.
Reviewed by: ian
Sponsored by: DARPA, AFRL
Sponsored by: Cavium (Hardware)
Differential Revision: https://reviews.freebsd.org/D14515
Retpoline is a compiler-based mitigation for CVE-2017-5715, also known
as Spectre V2, that protects against speculative execution branch target
injection attacks.
In this commit it is disabled by default, but will be changed in a
followup commit.
Reviewed by: bdrewery (previous version)
MFC after: 3 days
Security: CVE-2017-5715
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D14242
