In rare case, when the ifconfig is called just before kldunload, it is
possible, that ena_up routine will be called after queue locks are
released.
To prevent that, ifp is detached before the last ena_down is called and
further, the ifp is freed at the end of the function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The ENA driver needs at least 2 MSI-x - one for admin queue, and one for
IO queues pair. If there were not enough resources to allocate more than
one MSI-x, the device should not be attached.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
bus_alloc_resource_any() is not returning error value in case of an
error.
If the function call fails, the error value was not passed to the
ena_up() function.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
To prevent errors from assigning values from the DMA structure in case
of an error, zero the vaddr and paddr values upon failure.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The DMA in FreeBSD requires explicit synchronization. ENA driver was
only doing PREREAD and PREWRITE synchronizations. Missing
bus_dmamap_sync() calls were added.
It is also required to synchronize DMA engine before unloading DMA map.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
If the first MSI-x won't be executed, then the timer service will detect
that and trigger device reset.
The checking for missing Tx completion was reworked, so it will also
check for missing interrupts. Checking number of missing Tx completions
can be performed after loop, instead of checking it every iteration.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ena_com allows the number of CPUs to be passed to the device in
the host info structure as a hint.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Information about Tx error should be only displayed, if packet
preparation failed due to error other than out of memory.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Whenever the driver will receive too many descriptors from the device,
it should trigger the device reset, as it is indicating that the device
is in invalid state.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Receive Side Scaling is optional feature that could be enabled in kernel
configuration by defining flag RSS.
Kernel uses hash to store and find protocol control block which is
stored in hash tables.
Kernel and NIC hash functions must be consistent. Otherwise case lookup
fails.
To achieve this kernel provides API to set proper hash key to NIC.
As it is not possible to change key for virtual ENA NIC, this driver
cannot support RSS function.
ENA is designed to work in virtual environments so supporting hardware
version of this card is unnecessary.
Submitted by: Rafal Kozik <rk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Notification AENQ handler is responsible for handling requests from ENA
device. Missing Tx threshold, Tx timeout and keep alive timeout can be
set using hints from the aenq descriptor which can be delivered in the
ENA admin notification.
The queue suspending and resuming tasks are not supported by the
driver.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
ENA_ADMIN_FATAL_ERROR and ENA_ADMIN_WARNING aenq groups were indicated
as supported, so the unimplemented_aenq_handler() will print out error
message, whenever an error will occur within the ENA admin context.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
As the ENA is working only in virtualized environment, the active media
is not specified. Instead, the active link type is set as unknown.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
Recent HAL change preparing to support ENAv2 required minor driver
modifications.
The ena_com_sq_empty_space() is not available in this ena-com, so it had
to be replaced with ena_com_free_desc().
Moreover, the ena_com_admin_init() is no longer using 3rd argument
indicating if the spin lock should be initialized, so it was removed.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The new ena-com is required for the ENAv2 release of the driver.
Genmask macro was fixed in the platform file.
The GENMASK macro is intended to work on 32-bit values. Before this
patch the, calling GENMASK(31, 0) would cause 32-bit value to be
shifted by 32. This could lead to unexpected behavior, as shifting by
the number greater or equal to word length is undefined operation.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
The initialization required for LPIs (setting up pending tables etc.)
has to be done just once per CPU, even in the case where there are
multiple ITS blocks associated with the CPU.
Add a flag lpi_enabled in the per-cpu distributor info for this and
use it to ensure that we call its_init_cpu_lpi() just once.
This enables us to support platforms where multiple GIC ITS blocks
can generate LPIs to a CPU.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19844
Move the per-cpu LPI intialization to a separate function. This is
in preparation for a commit that does LPI init only once for a CPU,
even when there are multiple ITS blocks associated with the CPU.
No functional changes in this commit.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19843
Update 'struct gic_redists' to consolidate all per-cpu redistributor
information into a new 'struct redist_pcpu'. Provide a new interface
(GICV3_IVAR_REDIST) for the GIC driver, which can be used to retrieve
the per-cpu data.
This per-cpu redistributor struct will be later used to improve the
GIC ITS setup.
While there, remove some unused fields in gic_v3_var.h interface.
No functional changes.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19842
Based on ATA-ACS-4, recognize several bit-fields related to the ATA SANITIZE
feature-set, Self-Encrypting Drives, and form-factor identification.
As part of this change, the name of word 48 of (struct ata_params) is being
changed. The previous name, "usedmovsd" does not appear to be related to the
previous definition of the word ("double-word IO supported"). The word was
defined that way in ATA-1 (1994), but it was marked "Reserved" (meaning
"unused, but might be used in the future") in ATA-2 (1996). It stayed that
way until ATA-8 (2008), which re-defined it as implemented in this change.
The field is not used in-tree.
Reviewed by: mav
Sponsored by: Panasas
Differential Revision: https://reviews.freebsd.org/D20455
From Jake:
Vendor drivers that exist out-of-tree generally should return
BUS_PROBE_VENDOR from their device probe functions. This helps ensure
that a vendor replacement driver will supersede the in-kernel driver for
a given device.
Currently, if a vendor wants to implement a driver based on iflib, it
will always report BUS_PROBE_DEFAULT.
Add a wrapper function, iflib_device_probe_vendor() which can be used in
place of iflib_device_probe(). This function will just return
BUS_PROBE_VENDOR whenever iflib_device_probe() would return
BUS_PROBE_DEFAULT.
While vendor drivers can already implement such a wrapper themselves,
providing it in the iflib.h header makes it easier for the vendor driver
to do the right thing.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: erj@, gallatin@, marius@
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D20221
Due to an attempt to check two conditions at once in a macro not designed
as such, the assertion would always evaluate to true.
#define VERIFY3_IMPL(LEFT, OP, RIGHT, TYPE) do { \
const TYPE __left = (TYPE)(LEFT); \
const TYPE __right = (TYPE)(RIGHT); \
if (!(__left OP __right)) \
assfail3(#LEFT " " #OP " " #RIGHT, \
(uintmax_t)__left, #OP, (uintmax_t)__right, \
__FILE__, __LINE__); \
_NOTE(CONSTCOND) } while (0)
#define ASSERT3U(x, y, z) VERIFY3_IMPL(x, y, z, uint64_t)
Mean that we compared:
left = (type == ZIO_TYPE_FREE || psize)
OP = "<="
right = (SPA_MAXBLOCKSIZE)
If the type was not FREE, 0 is less than SPA_MAXBLOCKSIZE (16MB)
If the type is ZIO_TYPE_FREE, 1 is less than SPA_MAXBLOCKSIZE
The constraint on psize (physical size of the FREE operation) is never
checked against SPA_MAXBLOCKSIZE
Reported by: Ka Ho Ng <khng300@gmail.com>
Reviewed by: kevans
MFC after: 2 weeks
Sponsored by: Klara Systems
the code is not guarded by the if clause and has misleading indentation.
Approved by: scottl
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D20427
PT_ATTACH was consumed.
In particular, do not clear TDP_FSTP in ptracestop() if td_wchan is
non-NULL. Leave it to sleepq_catch_signal() to clear and convert zero
return code to EINTR.
Otherwise, per submitter report, if the PT_ATTACH SIGSTOP was
delivered right after the thread was added to the sleepqueue but not
yet really sleep, and cursig() caused debugger attach, the thread
sleeps instead of returning to the userspace boundary with EINTR.
PR: 231445
Reported by: Efi Weiss <valmarelox@gmail.com>
Reviewed by: markj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D20381
Since drm2 removal, there has not been any consumer of the feature in the
tree. I am also unaware of any out-of-tree consumer.
More importantly, the feature has been broken from the very start, both
before and after r306589, because the ivar was set on a device that does
not support it and it was read from another device that also does not
support it.
A bus-wide no-stop flag cannot be implemented as an ivar as iicbus
attaches as a child of various drivers. Implementing the ivar in each
and every I2C driver is just impractical.
If we ever want to implement this feature properly, then probably the
easiest way to do it would be via a flag in the softc of iicbus.
In fact, we might have to do that in the stable branches if we want to
fix the code for them.
Reported by: ian (long time ago)
MFC after: 1 month (maybe)
X-MFC-note: cannot just merge the change, must keep drm2 happy
Summary:
Due to missing relocation support in libdwarf for powerpc64, handling of dwarf
info on unlinked objects was bogus.
Examining raw dwarf data on objects compiled on ppc64 with a modern compiler
(in-tree gcc tends to hide the issue, since it only rarely generates relocations
in .debug_info and uses DW_FORM_str instead of DW_FORM_strp for everything), you
will find that the dwarf data appears corrupt, with repeated references to the
compiler version where things like types and function names should appear.
This happens because the 0 offset of .debug_str contains the compiler version,
and without applying the relocations, *all* indirect strings in .dwarf_info will
end up pointing to it.
This corruption then propogates to the CTF data, as ctfconvert relies on
libdwarf to read the dwarf info, for every compiled object (when building a
kernel.)
However, if you examine the dwarf data on a compiled executable, it will appear
correct, because during final link the relocations get applied and baked in by
the linker.
Submitted by: Brandon Bergren
Reviewed By: emaste
Differential Revision: https://reviews.freebsd.org/D20367
There were two remaining "gaps" in auditing local bridge traffic with
bpf(4):
Locally originated outbound traffic from a member interface is invisible to
the bridge's bpf(4) interface. Inbound traffic locally destined to a member
interface is invisible to the member's bpf(4) interface -- this traffic has
no chance after bridge_input to otherwise pass it over, and it wasn't
originally received on this interface.
I call these "gaps" because they don't affect conventional bridge setups.
Alas, being able to establish an audit trail of all locally destined traffic
for setups that can function like this is useful in some scenarios.
Reviewed by: kp
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D19757
Users of pseudofs (e.g. lindebugfs), should be able to receive
input from command line via commands like "echo 1 > /path/to/file".
Currently this fails because sh tries to truncate the file first and
vop_setattr returns not supported error for this. This patch simply
ignores the error and returns 0 instead.
Reviewed by: imp (mentor), asomers
Approved by: imp (mentor), asomers
MFC after: 1 week
Differential Revision: D20451
As I see, different NICs in different configurations may have different
numbers of TX and RX queues. The code was assuming 1:1 mapping between
event queues (interrupts) and TX/RX queues. Since number of interrupts
is set to maximum of TX and RX queues, when those two are different, the
system is doomed.
I have no documentation or deep knowledge about this hardware, so this
change is based on general observations and code reading. If some of my
guesses are wrong, please do better. I just confirmed HP NC550SFP NICs
are working now.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
CID 1400451: case 0 is missing a break/return and falling through to the
default case. waitpid(0, ...) makes little sense in the child, we likely
wanted to terminate immediately.
CID 1400453: size argument uses sizeof(char **) instead of sizeof(char *)
and is assigned to a char **; sizeof's match but "this isn't a portable
assumption".
CID: 1400451, 1400453
MFC after: 3 days
cpufunc, in terms of __builtin_ffs and the like, for arm32 v6 and v7
architectures, and use those, rather than the simple libkern
implementations, in building arm32 kernels.
Reviewed by: manu
Approved by: kib, markj (mentors)
Tested by: iz-rpi03_hs-karlsruhe.de, mikael.urankar_gmail.com, ian
Differential Revision: https://reviews.freebsd.org/D20412
It appeared that using NET_EPOCH_WAIT() while holding global BPF lock
can lead to another panic:
spin lock 0xfffff800183c9840 (turnstile lock) held by 0xfffff80018e2c5a0 (tid 100325) too long
panic: spin lock held too long
...
#0 sched_switch (td=0xfffff80018e2c5a0, newtd=0xfffff8000389e000, flags=<optimized out>) at /usr/src/sys/kern/sched_ule.c:2133
#1 0xffffffff80bf9912 in mi_switch (flags=256, newtd=0x0) at /usr/src/sys/kern/kern_synch.c:439
#2 0xffffffff80c21db7 in sched_bind (td=<optimized out>, cpu=<optimized out>) at /usr/src/sys/kern/sched_ule.c:2704
#3 0xffffffff80c34c33 in epoch_block_handler_preempt (global=<optimized out>, cr=0xfffffe00005a1a00, arg=<optimized out>)
at /usr/src/sys/kern/subr_epoch.c:394
#4 0xffffffff803c741b in epoch_block (global=<optimized out>, cr=<optimized out>, cb=<optimized out>, ct=<optimized out>)
at /usr/src/sys/contrib/ck/src/ck_epoch.c:416
#5 ck_epoch_synchronize_wait (global=0xfffff8000380cd80, cb=<optimized out>, ct=<optimized out>) at /usr/src/sys/contrib/ck/src/ck_epoch.c:465
#6 0xffffffff80c3475e in epoch_wait_preempt (epoch=0xfffff8000380cd80) at /usr/src/sys/kern/subr_epoch.c:513
#7 0xffffffff80ce970b in bpf_detachd_locked (d=0xfffff801d309cc00, detached_ifp=<optimized out>) at /usr/src/sys/net/bpf.c:856
#8 0xffffffff80ced166 in bpf_detachd (d=<optimized out>) at /usr/src/sys/net/bpf.c:836
#9 bpf_dtor (data=0xfffff801d309cc00) at /usr/src/sys/net/bpf.c:914
To fix this add the check to the catchpacket() that BPF descriptor was
not detached just before we acquired BPFD_LOCK().
Reported by: slavash
Tested by: slavash
MFC after: 1 week
