The driver is functional on both BHND Wi-Fi adapters and MIPS SoCs, but
does not currently include support for features not required by bwn(4),
including GPIO interrupt handling.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12708
The pair is of use only in debug or LOCKPROF kernels, but was passed (zeroed)
for many locks even in production kernels.
While here whack the tid argument from wlock hard and xlock hard.
There is no kbi change of any sort - "external" primitives still accept the
pair.
The bwn(4) driver requires a number of extensions to the bhnd(4) PMU
interface to support external configuration of PLLs, LDOs, and other
parameters that require chipset or PHY-specific workarounds.
These changes add support for:
- Writing raw voltage register values to PHY-specific LDO regulator
registers (required by LP-PHY).
- Enabling/disabling PHY-specific LDOs (required by LP-PHY)
- Writing to arbitrary PMU chipctrl registers (required for common PHY PLL
reset support).
- Requesting chipset/PLL-specific spurious signal avoidance modes.
- Querying clock frequency and latency.
Additionally, rather than updating legacy PWRCTL support to conform to the
new PMU interface:
- PWRCTL API is now provided by a bhnd_pwrctl_if.m interface.
- Since PWRCTL is only found in older SSB-based chipsets, translation from
bhnd(4) bus APIs to corresponding PWRCTL operations is now handled
entirely within the siba(4) driver.
- The PWRCTL-specific host bridge clock gating APIs in bhnd_bus_if.m have
been lifted out into a standalone bhnd_pwrctl_hostb_if.m interface.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12664
sa(4) has some unique behavior that is special-cased in cam_get_device. The
existing tests don't provide coverage for this special case.
Reviewed by: ken
MFC after: 3 weeks
Sponsored by: Spectra Logic Corp
Differential Revision: https://reviews.freebsd.org/D13185
On KERN_NO_SPACE error, as it is returned now, vm_map_find() continues
the loop searching for the suitable range for the requested mapping
with specific alignment. Since the vm_map_findspace() succesfully
finds the same place, the loop never ends.
The errors returned from vm_map_stack() completely repeat the behavior
of vm_map_insert() now, as suggested by Alan.
Reported by: Arto Pekkanen <aksyom@gmail.com>
PR: 223732
Reviewed by: alc, markj
Discussed with: jhb
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D13186
second scan of the address space with find_space = VMFS_ANY_SPACE is
performed. Previously, vm_map_find() released and reacquired the map lock
between the first and second scans. However, there is no compelling
reason to do so. This revision modifies vm_map_find() to retain the map
lock.
Reviewed by: jhb, kib, markj
MFC after: 1 week
X-Differential Revision: https://reviews.freebsd.org/D13155
The test creates a D library with a "depends_on library" pragma
referencing a non-existent library, and expects compilation to fail.
However, as far as I can tell, libdtrace is supposed simply abort
compilation of the library in this case, and continue. This behaviour
is desirable when adding libraries which depend on optional KLDs, for
example.
MFC after: 1 week
When you install a computer for the first time, the date in the CMOS sometimes
not accurate and you need to ntpdate as ntpd will fail a the time difference
is too big.
Add an option in bsdinstall to enable ntpdate that will do that for us.
Reviewed by: allanjude
Differential Revision: https://reviews.freebsd.org/D13149
r309934 cleaned up some cases in bsdinstall to use heredocs but broke
the indentation of the generated output, because <<- heredocs strip
leading tabs.
PR: 221982
Reviewed by: allanjude, dteske
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13190
With this bug fix we don't need to invalidate all the entries.
o Remove a call to pmap_invalidate_all(). This was never called
as the anyvalid variable is never set.
Obtained from: arm64/pmap.c (r322797, r322800)
Sponsored by: DARPA, AFRL
Rework the block device handle check to allow more robust device
classification. This is mostly usability issue - it can be quite confusing
for user when no disks are listed with lsdev.
Add more comments about what and why is done.
Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D13026
Patches with very little context (-U0 and -U1) could get misapplied if
the file to be patched changes and a hunk is no longer applicable. Matching
with fuzz would be attempted and default to a match when we unexpectedly ran
out of context.
This also affected patches with higher levels of context but had limited
actual context due to the hunk being located near the beginning/end of file.
PR: 74127, 223545 (exp-run)
Reviewed by: emaste, pfg
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12631
BHND Wi-Fi chipsets and SoCs share a common DMA engine, operating within
backplane address space. To support host DMA on Wi-Fi chipsets, the bridge
core maps host address space onto the backplane; any host addresses must
be translated to their corresponding backplane address.
- Defines a new bhnd_get_dma_translation(9) API to support querying DMA
address translation parameters from the bhnd(4) bus.
- Extends bhndb(4) to provide DMA translation descriptors from a DMA
address translation table defined in the host bridge-specific
bhndb_hwcfg.
- Defines bhndb(4) DMA address translation tables for all supported host
bridge cores.
- Extends mips/broadcom's bhnd_nexus driver to return an identity (no-op)
DMA translation descriptor; no translation is required when addressing
the SoC backplane.
Approved by: adrian (mentor)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12582
On BHND MIPS SoCs, this replaces the use of hard-coded MIPS IRQ#s in the
common bhnd(4) core drivers; we now register an INTRNG child PIC that
handles routing of backplane interrupt vectors via the MIPS core.
On BHND PCI devices, backplane interrupt vectors are now routed to the
PCI/PCIe host bridge core when bus_setup_intr() is called, where they are
dispatched by the PCI core via a host interrupt (e.g. INTx/MSI).
The bhndb(4) bridge driver tracks registered interrupt handlers for the
bridged bhnd(4) devices and manages backplane interrupt routing, while
delegating actual bus interrupt setup/teardown to the parent bus on behalf
of the bridged cores.
Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12518
In addition to some small style fixes to the ARMv6 vDSO, this release
includes a new vDSO that can be used for the execution of ARMv6/ARMv7
code on 64-bit platforms.
Just like for i686 on x86-64, this new vDSO is responsible for padding
arguments and return values to 64-bit values, so that the kernel can
easily forward system calls to the native system calls.
Obtained from: https://github.com/NuxiNL/cloudabi
The periodic 200.backup-passwd script outputs any differences it finds
in master.passwd, relative to the previous backup. It intends to elide
the encrypted password field, but previously did so only for changed
lines (i.e., those beginning with - or + in the diff).
Apply the sed expression also to unchanged lines to also elide their
passwords.
PR: 223461
Reported by: Andre Albsmeier
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Following struct vmtotal changes, make systat use and correctly
display 64-bit counters. Switch to humanize_number(3) to overcome
homegrown arithmetics limits in pretty printing large numbers. Use
1024 as a divisor for memory fields to make it consistent with other
tools and users expectations.
Submitted by: Pawel Biernacki <pawel.biernacki@gmail.com>
Sponsored by: Mysterious Code Ltd.
PR: 2137
Differential revision: https://reviews.freebsd.org/D13105
riscv doesn't have -msoft-float. For the moment, just don't add
anything. There's no /boot/loader or other bootstrap contained in the
tree for riscv*. However, with real hardware coming next year, there
are plans for one, so keep building at least a minimal libsa and
ficl to prevent bitrot.
Sponsored by: Netflix
The supported targets are riscv64 and riscv64sf. Use the former when
building with a bare TARGET=riscv and it is the more common one.
Sponsored by: Netflix
The problem happens when the writes have offsets and sizes aligned with
a filesystem's recordsize (maximum block size). In this scenario
dmu_tx_assign() would fail because of being over the quota, but the uio
would already be modified in the code path where we copy data from the
uio into a borrowed ARC buffer. That makes an appearance of a partial
write, so zfs_write() would return success and the uio would be modified
consistently with writing a single block.
That bug can result in a data loss because the writes over the quota
would appear to succeed while the actual data is being discarded.
This commit fixes the bug by ensuring that the uio is not changed until
after all error checks are done. To achieve that the code now uses
uiocopy() + uioskip() as in the original illumos design. We can do that
now that uiocopy() has been updated in r326067 to use
vn_io_fault_uiomove().
Reported by: mav
Analyzed by: mav
Reviewed by: mav
Pointyhat to: avg (myself)
MFC after: 1 week
X-MFC after: r326067
X-Erratum: wanted
HAVE_GPT isn't currently a thing, but HAVE_GELI is. Replace the former
with the latter and remove util.o from the build list (it's picked up
from libsa/libsa32, and that's OK).
Sponsored by: Netflix
copied from the build host. It is renamed to /etc/resolv.conf.bak
on boot, so never used anyway.
Noticed by: peter
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
uiocopy() is currently unused, its purpose is copy data from a uio
without modifying the uio. It was in use before the vn_io_fault support
was added to ZFS, at which point our code diverged from the illumos code
a little bit. Because ZFS is the only (potential) user of the function
we are free to modify it to better suit ZFS needs.
The intention behind this change is to remove the differences introduced
earlier in zfs_write().
While here, re-implement uioskip() using uiomove() with
uio_segflg == UIO_NOCOPY.
The story of uioskip is the same as with uiocopy.
Reviewed by: mav
MFC after: 1 week
the system time.
As we seem to only read this time on boot, and this is the only source of
time on many arm64 machines we need to enable this by default there. As
this is not always the case with U-Boot firmware, or when we have been
booted from a non-UEFI environment we only enable the device driver when
the Runtime Services are present and reading the time doesn't result in an
error.
PR: 212185
Reviewed by: imp, kib
Tested by: emaste
Relnotes: yes
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12650
Add some rules to more closely match what illumos does when an address
resolves to multiple symbols:
- prefer non-local symbols
- prefer symbols with fewer leading underscores and no leading '$'
Add some regression tests to verify these rules.
`vidcontrol -h 0` is acceptable, so be explicit that it's less than zero
that is not allowed.
Reported by: Siva Mahadevan
Sponsored by: The FreeBSD Foundation
case another thread has had the VFP unit enabled and will have its state
in the VFP registers along with it stored in memory. As such we don't need
to store the state, but do need to zero the fpcurthread pointer to stop
the VFP driver from using the enable fast path.
Reported by: emaste
Sponsored by: DARPA, AFRL
Some drm2 drivers will set PG_FICTITIOUS in physical pages in order to
satisfy the OBJT_MGTDEVICE object interface, so a scan may encounter
fictitous pages. For now, allow for this possibility; such pages will be
skipped later in the scan since they are wired.
Reported by: avg
Reviewed by: kib
MFC after: 1 week
parsing a textual UEFI Device Path, since otherwise it things the
passed in path is a filename. While here, reduce the repetition of
8192.
Sponsored by: Netflix
produces hex numbers for the dsn. Since that come is from EDK2, change
this for symmetry, by generating the dsn as a hex number.
Noticed by: gpart list | grep efimedia | awk -F: '{print $2;}' | \
sed -e 's/^ *//g;s/,,/,/' | grep MBR | efidp -p | efidp -f
Sponsored by: Netflix
